Cam shaft is not included with the gasket retainer. Must be purchased separately.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
LG, Kenmore.
Part# 4930JJ2028E replaces these:
4930JJ2028G
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.8
Filter By Rating:
5 Stars
3
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Steven B - June 15, 2020
Verified Purchase
Perfect part, perfect fit!
Quick shipping, able to install with very little difficulty, a little challenging trying too figure it out, but not being a mechanic, was able to get it done!
★★★★★
★★★★★
Earl W - February 18, 2019
Verified Purchase
Exactly what I needed
Part fit perfectly
★★★★★
★★★★★
Scott Andrew C - September 16, 2018
Verified Purchase
10-minute repair
Part arrived within two days. Quick and easy repair - but a definite design flaw on the part of LG. Be careful when removing the gasket retainer from the door chassis, because as the white retainer clips age, they become more brittle and are easily broken (learned this the hard way)
★★★★★
★★★★★
Chad M - August 16, 2018
Verified Purchase
Got the right parts, on time, and easy installation!!!
Needed latches for an LG refrigerator. Schematics and part description made no sense to me. Called customer support described what I needed, and they took care of me. Replacement with the correct parts was a snap and now my refrigerator doors stay closed and cold. Thanks again!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
(1) Gasket holder is quite simple. Remove snap-on trim to expose gasket. Identify upper and lower clips (white 1" long) that hold gasket holder into frame of fridge door. Gently pry out / remove with flat-headed screwdriver. Gasket holder will slide out frpm the gasket. Replace - make sure you get the cam facing the correct way at the t
... Read moreop of the holder. This is a pretty easy repair, 20 minutes beginning to end. (2) RHS light switch failed - replaced both -- door hinge cap removes w/ a single appliance screw - switches are plug-in to the wiring assembly, and snap into place in the hinge cap.