Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brandon S - May 18, 2019
Verified Purchase
Two person, but simple enough repair.
Part was in good shape and worked perfectly. Cooking a pizza as I type this.
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kaye
November 13, 2017
After the top oven is cut off, the fan quits working and the control panel, as well as the wooden cabinet above the oven gets really hot. Is this an indication that the oven needs a new fan? Thank you.
For model number JTP75SM1SS
Hi Kaye,
Thank you for your inquiry. From what you described the fan should be replaced, but I would also check the control board to see if there is not an issue with that as well. If the I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kenneth
February 22, 2019
My GE oven appears to increase in temperature after the first 15 to 20 minutes and pies which use to be cooked properly tend to overcook on the bottom. I have replace the thermostat and control board. I am suspecting that the fan is only operating intermittently. Will replacing the fan fix this issue or should i be looking at another item to correct this issue?
For model number JTP30SM1SS
Hello Kenneth, Thank you for the question. If the sensor and the board did not fix the issue, the next likely cause woudl be the fan not circulating the air. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Peter
September 16, 2019
How is the cooling fan attached? (part 32) on the diagram, i do not see any screws. I have the cover open and it appears to be screwed from the back? Does this mean i must pull the oven out to get at these screw?
For model number PT956BM2BB
Hello Peter, thank you for your question. Yes in order to remove the cooling fan, you will need to remove the oven from the wall and access the fan from the rear of the unit. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
February 1, 2020
The fan is not working in our GE wall oven. How can one determine whether the problem is the fan or a defective control panel?
For model number JTP31SR2SS
Hi Bob. You can test the fan motor with a multi-meter. Thank you for your question and good luck with your repair.
