Dual surface element switch 316238201

Hello Alfie, thank you for your question. The burner switch for the large burner on your appliance is part number Surface Element Switch 316436001 - the part number 316238201 is for the dual element. The switches are specific to each size burner, so you would want to order part number Surface burner control switch for the large surface element part number 316436001. I hope this helps!

Hello David thank you for your question. If the element is stuck on high that means that the switch that controls the burner is not functioning properly. You will want to replace the surface burner switch that controls that burner. Good luck with your repair!

Hi Kristen, Thank you for your question. Where the burner is only working on high, you will need to replace the front right burner switch. The part number listed under your model number for the front right burner switch is PS3504401. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Hi John, Thank you for the question. I suggest checking all the wiring. A mouse may have got in and chewed some wires, or it may have shorted out. Other then the terminal block and the wiring there is no one part that would control the top and the oven. The control board controls the oven and each cooktop burner has its own control switch. The switches and the board all hook into a wire harness. If the new terminal block didn't fix the issue, I would look at the wire harness. Hope this helps!

Hi Gina, Thank you for the question. Each burner has its own switch. Hope this helps!

Hi Baocheng, this could be a faulty burner or switch. However According to our database, the model number you provided is just a portion of a model number with multiple possible variations. To ensure that we recommend parts that will work for your model, please check your information again; you will need to provide us with the full model and serial numbers located on the sticker on the unit itself. Once we have that information, we would be happy to find the part you need. Thank you for your question and good luck with your repair!

Hi Tim, Thank you for your question. Yes, this would be the correct switch for the dual surface burner. We hope this helps. Thank you and have a great day.

Hello Howard, Thank you for the question. We suggest testing the element for continuity. The Element should read closed. You can also remove the elements and look for brakes or burnt spots on the ribbon cable or in the element. We hope this helps!

Hi Travis, thank you for reaching out. Based on the description that you have provided, we would recommend checking the following parts: dual surface element, part number PS6012259, dual surface element switch, part number PS3504401, and knob, part number PS2581841. We hope this sorts out your problem!

Hello Dewayne, Thank you for the question.Looking at the old switch, you will see markings on the spades. They should match the new switch but may not be in the same location on the unit. Match L1 to L1 and L2 to L2 ect. Thank you for your inquiry, good luck with this repair!