Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
May 20, 2019
Error code F06 E02
For model number WFW95HEXW
Hi Ron, thank you for your question. Unfortunately that error code means that you have a communication error between your control board and user interface/control panel. One of those parts would be giving you the issue. Unfortunately only a trained technician would know how to test the parts to determine which one would be the issue. Good luck with your repair.
Was this helpful?
Thank you for voting!
Scott
August 26, 2019
What part number do i need if the "main control board" is bad?
For model number WFW95HEXL2
Hi Scott, thank you for your question. This is the part that you are looking for according to your manufacturer and the model number provided. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Robert
October 18, 2019
Woke up smelling a burnt smell. Washer would not turn on. Found w10406633 black and burnt what would cause that?
For model number WFW95HEXW2
Hello Robert, Thank you for the question. It could have been a power surge or a defect in the part. I suggest checking the wiring going to and from the board. Hope this helps!
Was this helpful?
Thank you for voting!
Joe
November 16, 2019
Do you have any troubleshooting info available before i replace the mcu. I replaced the user interface board because my troubleshooting pdf i found online brought to that being the problem now i have a f1e2 code and are not sure it’s the mcu because that code only came on after performing all the troubleshooting diagnostics tests
For model number wfw95hexw1
Hi Joe, thank you for your question. For an electronic control board, only a technician can properly test such a part. However the F1 E2 error code means this: The main control board motor circuit has malfunctioned internally. The motor circuit has malfunctioned due to over voltage or over current conditions.So what you can do is unplug your machine for about ten minutes. If the error code persists, then you have to replace the board. Good luck with your repair.
Was this helpful?
Thank you for voting!
Denise
March 3, 2024
Hello, what is an F06 E05 code? Thank you
For model number WFW95HEXL2
Hello Denise, thank you for your question. There is some type of communication error between the two components ( Motor Control Unit PS11753928 and Central Control Unit PS3500876) or the wire connectors between the three. You may want to remove the shipping bolts as they may be causing some interference. We hope this helps.
