Part Location Diagram of W10195416 Whirlpool Lower Dishrack Wheel
See part 2 in the diagram
Replacing your KitchenAid Dishwasher Lower Dishrack Wheel
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Lower Dishrack Wheel W10195416

★★★★★
★★★★★
322 Reviews

Rated by 28 customers 

Very Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 46.04
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS3406971
Manufacturer Part Number W10195416
Manufactured by Whirlpool
Product Description

Lower Dishrack Wheel Specifications

This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult. This can happen due to normal wear and tear, and the part should be replaced if this occurs. Check your model number and user manual to make sure this part is correct. It attaches directly to the dishrack. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. It measures roughly 3x6 inches.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your KitchenAid Dishwasher Lower Dishrack Wheel

Replacing your KitchenAid Dishwasher Lower Dishrack Wheel
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Door won’t close | Noisy | Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Whirlpool, Maytag, Kenmore.
Part# W10195416 replaces these:
W10195416V, W10195416VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
322 Reviews
4.8
Filter By Rating:
  • 5 Stars
    284
  • 4 Stars
    25
  • 3 Stars
    6
  • 2 Stars
    2
  • 1 Star
    5
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.8 / 5.0, 28 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Bottom Rack Wheel Assembly
Installation was very easy. The online video was excellent and clear.
Thanks
  • Albert from LIBERTY TWP, OH
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The wheels on the bottom ‘basket’ are only fastened by a ‘Snap-in’ (plug) style connector that gets brittle and breaks over time
Pop off the shell assembly from the bottom basket and clip/click on a new wheel assembly.
Other Parts Used:
Dishrack Adjuster and Wheel Assembly Lower Dishrack Wheel
  • Alfred L from WESTBOROUGH, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace parts to basket
did need the strength of husbands hands to pop out old parts
Other Parts Used:
Rack Stop Clip Lower Dishrack Wheel
  • Eugena from LULING, LA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic pieces had broken on both the top and bottom racks
The parts select site had an excellent breakdown of what I needed to replace. When I got the pieces, however, it wasn't so apparent how to do it. I actually used YouTube video to show the process.

The trickiest part was actually uninstalling the broken pieces. I had to work backwards through the YouTube video.

The other tricky bit is having a sense of how hard you can push to snap plastic pieces in and out.

Also, watch the whole video! I didn't, and I ran out for a tool (a star driver, I think that's what it's called) that was actually in the bag of screws that came with the assembly.

It seems like Kitchen Aid realizes they have a problem with plastic fatigue, because they have replaced some of the plastic parts with metal.

If you take your time and stay organized this is a very doable repair.
Other Parts Used:
Drawer Track Rack Stop Clip Lower Dishrack Wheel Dishwasher Dish Rack Adjuster Kit - Left and Right Side
  • Phelim from NEW YORK, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel fell off
followed video instruction
  • Richard from BOSTON, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two wheels on the lower rack kept falling off.
Very, Very easy - watched the Installation Video highlighted on web page and the entire process took less than 5 minutes!
  • Linda from TRES PINOS, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheels fell off
These wheel assembly that came on the lower rack of my dishwasher were junk! They started falling off within 6 months. I put them back on to the point that the pin in the center of the wheels would no long stay in place, thus the frustrating situation of the wheels falling off often.

Assembly was easy peasy!
  • Jan B. from BEAVER, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel broke off the lower rack on my dishwasher.
Just snapped in the wheel assembly very easy.
  • Marvin from WANTAGH, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower rack's wheels broke, all 4 pairs
With a little pressure, I was able to push off the broken wheel pieces with my thumbs. I was able to snap on the new wheel pieces really easily.
This job took less than 15 minutes to replace all 4 wheel pieces.
  • Carrie from SAN TAN VLY, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced wheels on lower rack
My husband did the repair. It was very easy. He basically just popped off the old wheels and popped on the new ones.
  • Jane from JOLIET, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lawrence
17 days ago
For a broken wheel on bottom rack can I replace the wheel only or do you have to replace whole wheel assembly ?
For model number MDB8959SFZ4
PartSelect logo
Hi Lawrence, Thank you for writing. The Wheel is not sold on its own sorry, the whole Wheel Assembly will need to be replaced. We hope this helps!

Was this helpful?
Thank you for voting!
  • 1
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service