Average Repair Rating: 4.9 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Added parts to interior to improve capacity utilization
The 2 wire baskets FZ with their handles replaced one shelf in the freezer. Thus there was improved utilization of the capacity. When we originally filled the freezer, it was obvious that about 2 cubic feet were not used. Part numbers are WR21x10060 and WR12x10626. A similar situation is in the refrigerator side. We added the snack dr
... Read moreawer and shelf pan assy. (replacing one glass shelf) and the shelf module FF to the door. Part numbers are WR32x26244, WR71x10685 and WR71x38318. I had to work with Parts Select Customer Service to identify the correct parts since they are not on the BOM for this model, but are on BOM's for similar capacity refrigerators. The service representatives were very helpful.
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peggy
January 14, 2019
We have several shelves in our freezer compartment that are just not wide enough. Are there appropriate replacements that actually fit. I don't want to purchase replacement shelving is they don't fit properly.
For model number pshf9pgzbcbb
Hello Peggy, thank you for your question. Sometimes the inside walls of the freezer will flex and the shelves do not fit properly anymore. If the shelves that don't fit are the original shelves that came with the unit ordering new ones will not fix the issue. You will need spacers to clip to the sides of the wire racks to allow the shelves/wire baskets to remaining seated and not fall. The spacer is part number WB4X174. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
