Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
PIERRE
October 9, 2019
Code erreur e0 32 quand on essaie d"allumer un rond ou ouvrir le four.... est-ce que cette pièce va resoudre le probleme?
For model number cpcs3085lfa
Bonjour Pierre, merci pour votre question. Ce code d'erreur signifie que la tension de votre carte est basse. Vous voudrez peut-être vérifier tout le câblage et les connexions pour vous assurer que tout est en bon état de fonctionnement. Si c'est le cas, votre conseil d'administration peut être le problème. Bonne chance avec votre réparation.
Was this helpful?
Thank you for voting!
Carlos
October 11, 2021
Necesito el panel central de la cocina, donde esta los botones y perillas
For model number FPES3085KFG
Hola Carlos, Gracias por contactarnos. Hemos investigado el modelo que nos ha proporcionado y hemos encontrado que la pieza que busca es PartSelect Number PS2369161. ¡Esperamos que esto ayude!
Was this helpful?
Thank you for voting!
Barbara Perreault
November 6, 2018
I was told i need to relace my elec control board i was wondering if replacing the thermostat is maybe all i need the bake feature does go to 425 but does not stay on and the pre heat feature goes up to 185 i know because i have an o/s temp in oven to see how hot it gets.
For model number FPES3085KFF
Hi Barbara,
Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. You may also have to check the terminal block, the elements and the electronic control board if the sensor is fine. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Sandi
November 26, 2018
When i press the start button after i press either bake/broil the start button does not work. After i press any other button there is a beep noise and none with the start button. Is this the part i need to replace?
For model number FPES3085KFB
Hello Sandi, Thank you for the question. Yes, this sounds like a defective Control Board and it will need to be replaced. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
