Models > FPCS3085LFA

FPCS3085LFA Frigidaire Range - Overview

Sections of the FPCS3085LFA

[Viewing 7 of 7]

Manuals & Care Guides for FPCS3085LFA

Click to download
Keep searches simple, eg. "belt" or "pump".
Light Bulb – Part Number: 316538904
Light Bulb
★★★★★
★★★★★
(11)
PartSelect #: PS12751166
Manufacturer #: 316538904
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If...
$19.88
  In Stock
Temperature Sensor – Part Number: 316217002
Temperature Sensor
★★★★★
★★★★★
(14)
PartSelect #: PS820208
Manufacturer #: 316217002
The oven temperature sensor for your range may also be called a probe. The quick connect on this part may differ than your original piece. If the temperature sensor does not fit you will have to cut o...
$48.25
  In Stock
Main Terminal Block Kit – Part Number: 5304409888
Main Terminal Block Kit
★★★★★
★★★★★
(12)
PartSelect #: PS471605
Manufacturer #: 5304409888
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches...
$15.12
  In Stock
LENS – Part Number: 5304524341
LENS
★★★★★
★★★★★
(5)
PartSelect #: PS16218465
Manufacturer #: 5304524341
The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing...
$10.52
  On Order
Inner Oven Door Glass – Part Number: 316117500
Inner Oven Door Glass
★★★★★
★★★★★
(4)
PartSelect #: PS439086
Manufacturer #: 316117500
This inner oven door glass, also called an oven heat barrier glass, is a transparent and heat resistant sheet of glass that fits into your oven or range. While containing the heat, the sheet of glass ...   No Longer Available
Broiler Pan Grate Insert – Part Number: 5304494997
Broiler Pan Grate Insert
★★★★★
★★★★★
(3)
PartSelect #: PS9864838
Manufacturer #: 5304494997
This includes pan and insert.
$63.35
  In Stock
Oven Light Socket – Part Number: 316116400
Oven Light Socket
★★★★★
★★★★★
(4)
PartSelect #: PS439060
Manufacturer #: 316116400
The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to remove the back panel t...
$46.77
  In Stock
Mounting Screw – Part Number: 5303323134
Mounting Screw
PartSelect #: PS467647
Manufacturer #: 5303323134
Sold individually.
$11.55
  In Stock
Outer Drawer Glide – Part Number: 316105501
Outer Drawer Glide
PartSelect #: PS977459
Manufacturer #: 316105501
As per the factory, the original part was 19 3/4 inches and the new substituted part is 16 1/4 inches. According to the factory, this part will still work with your appliance.
$75.53
  In Stock
Rack Support – Part Number: 318927600
Rack Support
★★★★★
★★★★★
(5)
PartSelect #: PS2369181
Manufacturer #: 318927600
$23.60
  In Stock
Door/Bracket Screw – Part Number: 215822000
Door/Bracket Screw
PartSelect #: PS423766
Manufacturer #: 215822000
Sold Individually.   No Longer Available
Oven Door Light Switch – Part Number: 316445501
Oven Door Light Switch
PartSelect #: PS1146808
Manufacturer #: 316445501
This oven door light switch signals the light to turn off when the oven door closes. If your light switch is defective or you smell a burning odor, make sure to check the switch and replace it. The to...
$74.23
  In Stock

Questions And Answers for FPCS3085LFA

Ask our experts a question about this model and we'll get back to you as soon as possible!

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Griff
    February 3, 2020
    What does error code e0 95 mean? It shows up on the 2-digit leds on the burner controls. This happens right after plugging in the unit.
    For model number FPCS3085LFA
    Hello Griff, thank you for your question. That error means that the board sees an issue with the voltage to the unit. It may be an issue with your home's power supply or the appliance itself. You will need to test right at the receptacle where it is wired into the home's wiring. If that voltage is found to be okay (240 volts between red and black wires, 120 volts between black and white and red and white), the issue would be with one of the control boards. I hope this helps.

    Was this helpful?
    Thank you for voting!

      Common Symptoms of the FPCS3085LFA

      [Viewing 6 of 6]
      Little to no heat when baking
      Fixed by
      these parts
      Show All
      Oven is too hot
      Fixed by
      these parts
      Show All
      Will Not Start
      Fixed by
      these parts
      Show All
      Element will not heat
      Fixed by
      these parts
      Show All
      Oven not heating evenly
      Fixed by
      these parts
      Show All
      Little to no heat when broiling
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      Oven not heating to desired temperature
      Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
      Parts Used:
      Temperature Sensor
      • Dan from Bellevue, ID
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      145 of 218 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Cord was not tightened enough by delivery crew.
      PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
      Parts Used:
      Main Terminal Block Kit
      • Timothy from Spring Valley, AL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers, Socket set
      90 of 138 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Cracked oven door inner glass
      Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The inner glass is contained in a metal frame with another piece of glass; this frame comes apart easily using the clips in each side. The door assembles easily after the glass is replaced; just take your time and give yourself enough room to lay out the parts as you go. Good luck!
      Parts Used:
      Inner Oven Door Glass
      • Mitch from Fernandina Beach, FL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      71 of 102 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!