GE/GE_Thumb/00115410i01.gif
See part 3 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Surface Burner Switch - 8 Inch - 2500W

★★★★★
★★★★★
33 Reviews
$ 33.70   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS236750
Manufacturer Part Number WB24T10025
Manufactured by GE
Product Description

Surface Burner Switch - 8 Inch - 2500W Specifications

The 8-inch surface element switch is also known as an infinite heat switch, and is a part for your range. It controls the large surface element. It will turn the element on and off, and allow you to change the heat intensity. The knob to adjust the heat setting mounts on the shaft of this swtich. The burner knob is sold separately. If your large surface element will not turn on, or you cannot adjust the heat intensity, you may have a broken or damaged surface burner switch. Be sure you disconnect your range from the power source before you begin this repair.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat | Will Not Start | Oven is too hot
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB24T10025 replaces these:
AP2024072, 769692, WB24T10025
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

14 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
July 23, 2017
One of the 8" stove top elements will not lower the heat when turned down. Will a bad surface burner switch cause this problem?
For model number GE JBSO7M1WW
Hi Jim, That is a great question. If you not able to turn the heat down on your surface burner then the issue is with the switch. I hope this helps. Have a great day!

29 people found this helpful.

Was this helpful?
Thank you for voting!
Ernest
February 2, 2018
8" burner stays on Max heat ...does not turn off
For model number JBP66WOB2WW
Hi Ernest, Thank you for your question. If the burner is staying on maximum heat and it will not turn off, then the issue is with the burner switch that controls it and it will need to be replaced. I hope this helps. Thank you and have a great day!

11 people found this helpful.

Was this helpful?
Thank you for voting!
Jim
August 9, 2019
I turn on my 8” burner and there is a little pop noise , and the burner seems to be over heating . It’s already ruined one of my stainless steel boiling pots . I thought it might be the surface element switch . What do you think ?
For model number JBP23DR1WW
Hello Jim, thank you for inquiring. It could be either this 8" Surface Burner Switch part number PS236750, the 8" Surface Burner Element itself, part number PS243922, or the Surface Burner Terminal Block Kit part number PS232606 for your model. I hope this helps and good luck with your repair!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Doug
September 21, 2017
Burner light stays on. Checked continuity on burner switches. Short between black lead (removed) and other 2 leads on one switch. Is it safe to use the other burners with one disconnected while waiting for replacement?
For model number JBBP24DM1WW
Hi Doug, Thank you for your question. Yes, it would be able to use the other burners on your stove. Good luck with your repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Andrea
April 6, 2018
Both of the large burners will randomly go to red hot regardless of the heat setting. Do i need to replace the burner switch?
For model number JBP23DR2BB
Hello Andrea, Thank you for your inquiry. We would recommend checking the switches and surface burner terminal block kits-which is the wiring to the element. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Dwight
December 5, 2018
How to install # ps236750. 8 inch burner switch?
For model number ABS45DF1BS
Hi Dwight, thank you for your question. We have a video underneath the part information above. Here is the link: https://youtu.be/7hoJqv_pQvg. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Tim
March 15, 2018
I have a Hotpoint stove rb536dp1ww and the preheat indicator will not go off. It does not turn the oven on. It just stays on. I replaced the lamp pilot and its still stays on. Any help you can give is helpful
For model number RB536DP1WW
Hi Tim, Thank you for your question. There are some parts that you will need to check to see which ones are causing the issue. You will need to check the electronic control board, the oven thermostat, the terminal block and the burner switches. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Lewis
April 25, 2018
One large eye will sometimes go to Max heat. Is this in the eye switch?
For model number JBP23DR2CC
Hi Lewis, Thank you for your question. It could be your switch or the element itself. I would suggest testing your element to make sure that it is working correctly. You would be able to test that part with a multi meter. If your burner is fine then it may be your switch that is the issue. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Lee
February 1, 2018
Hello, my big burner has apparently given up on us.. this stove top is going on 11 years now and this past weekend we were cooking with a very large pot probably weighing 30 pounds or more and we had it cranked up on high for about 2 hours.. sparks starting coming out from the bottom of burner and then we noticed that the burner had bent because of it being too hot and too heavy.. I replaced the contraption that goes to the burner but now it does not work.. I straightened the burner that got bent and the light of the burner comes on but does not heat up at all.. I tried another lighter contraption but it still did not work.. any suggestions..
For model number JBS07H1BB
Hi Lee, Thank you for the question. If the element sparked and bent, it may have burnt out. I suggest replacing the element, Part Number: PS226491. Good luck with the repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Tim
March 8, 2018
My preheat light comes on randomly. Does not turn oven on but that part needs to be replaced. What is the part called that controls the oven pre heat indicator? Thank you and have a great day.
For model number RB536DP1WW
Hello Tim, thank you for your question. I think you are referring to the indicator light, or LAMP PILOT part number WB25K10002. Please enter the part number into the site for current price and availability and picture of the part. Good luck with your repair!

Was this helpful?
Thank you for voting!
Part Videos

Replacing your General Electric Range Surface Burner Switch - 8 Inch - 2500W

Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 22 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The switches failed on both front burners.
Remove nobs from both switches.
Pull out the range (the hardest part).
REMOVE THE POWER PLUG FROM THE WALL
Remove 7 screws with nut driver and take off upper back panel.
Remove 2 phillips screws from front, they hold the switch brackets.
The new switches don't fit in the bracket so discard the bracket keeping the screws.
Removing 1 wire at a time from the old switch transfer to the new noting the letter/number ie "H1 P1" combos they are all there just not in the same places on the new switch.
When wiring is complete, using the bracket ,screws from the front screw on the switches.
Replace the back panel with 7 screws.
In my case the old nobs did not fit the shafts of the new switches. I found some at the local hardware store. I bought 4 for $0.29 each! I expect to be replacing the other burner switches shortly.
  • Marc from Columbia, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    WB24T10029, WB24T10025
83 of 89 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner was constantly at high heat
I removed the rear cover from the stove then removed the knob and two screws on the front panel that hold the control in place. I then took the wires off the old control one at a time and placed them on the new control. Then I placed the control in position and tightened the two screws on the front panel, replaced the knob and screwed the back panel in place.
  • Rick from Avon Park, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
  • Parts Used:
    WB24T10025
35 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
when cooking on the 8" burner it would randomly go high heat.
first slide out range from wall and unplug it. then remove the rear panel, it is about 6 or 8 1/4" screws. remove the selector knob on the front of range and then remove the two philips head screws. this is how you remove the burner controller. hold the new controller next to the od one and one by one take the wires off the old one and put them on the new one. re-assemble and you are good to go.
  • kevin from crossroads, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    WB24T10025
23 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface element indicator remained on.
The known problem: a short occured between the surface element and the INF switch. After replacing the wire between the surface element and INF switch. The surface indicator light remained on - indicating a power surge/spike. Prior to removing the old INF switch I disconnected the wires from the old switch one at a time and plugged each into the new switch terminals. Then I removed the knob from the front of the control panel and the 2 screws holding the old INF switch in place. Removed the old switch and replaced it with the new switch. Reinstalling the 2 screws and the knob. Surface indicator light was no longer illuminated and surface element works fine.
  • Ed from Plymouth, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WB24T10025
17 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner not heating
Originally the burner had a hole burnt through it, which resulted in a hole being burnt through the bottom of a pan. I replaced the burner and it would not heat up. I removed the top control panel, after securing power to the stove outlet, turned the power back on checked both sides of the swith with a meter (with the switch on) and had no power on one side. I went to two stores that did not have the switch in stock and ended up ordering from this site at about half the price! It arrived a couple of days later. I marked the wire colors on the old switch, took off the knob, removed two phillips head screws, pulled out the old switch and installed the new one and I was back in business. The hardest part was getting the sheet metal / heat gaurd positioned right upon re-assembly. To remove the panel there are two screws in the rear (nut driver) and a screw on either side of the front under each corner that require a torx driver to remove.
  • jeffrey from geneva, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    WB24T10025
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
infinate switch stem broke
took of the back panel with a nut driver,pulled off the wires one at a time ,put them on the new switch in same position as the old switch.removed old switch with a screwdriver ,screwed in new switch,replaced back panel,put on switch knob
  • stephen from salem, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    WB24T10025
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner went to "HI" after control knob turned past "MED"
Removed the screws holding the back in place, then pulled off the control knob and removed the two screws holding the infinity switch. Swapped the leads from the old to the new switch and reinstalled everything. Worked like a champ!
  • Joel from Colorado Springs, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
  • Parts Used:
    WB24T10025
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
8" element shorted out
First replaced the 8" burner element-still did not work.
second: replaced the TERMINAL BLOCK KIT still did not work.
third : finally replaced switch: very easly-make sure you do not take off any of the wires on the back of the switch-take new switch and replace each wire on the same location than remove the old switch and replaced wired new on with the two screws.
  • David from Highlands, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    WB24T10025
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
8 inch burner would not work on lower settings
1. Shut off power at breaker.
2. lift and prop up burner panel (top of stove)
3. removed three screws along top edge.
4. remove oven door (lifts off hinges easy)
5. remove 4 screws along upper oven opening
6. remove 2 screws up under front panel and pull out upper panel enough to access back of switches.
7. unplug wires (5) one at a time and plug onto new switch.
8. remove the two screws from front holding switch in place and remove old switch.
9. install the two screws attaching new switcj.
10 replace all screws in reverse order.
11. Re-install door.
12 close breaker
easy job any one with any mechanical no-how can do.
  • Melvin J. from Waldport, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WB24T10025
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
shaft of switch broke and old model oven had part number problems.
unplugged oven, pulled from wall, removed panel, removed switch, read directions, modified new switch, installed new switch, cleaned behind oven, and back in service.
  • James from Memphis, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
  • Parts Used:
    WB03T10203, WB24T10025
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
33 Reviews
4.8
Filter By Rating:
  • 5 Stars
    27
  • 4 Stars
    6
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS236750
Manufacturer Part Number: WB24T10025
Brand
Model Number
Description
General Electric
15451-0
Range
General Electric
154510
Range
General Electric
155910
Range
Kenmore
91192502990
Range
Kenmore
91192502991
Range
Kenmore
91192502992
Range
Kenmore
9119250799
Range - Kenmore Range/Stove/Oven Model 911.9250799 (9119250799, 911 9250799) Parts
Kenmore
91192507990
Range
Kenmore
91192507991
Range
Kenmore
91192507992
Range
Kenmore
91192712020
Range
Kenmore
91192714020
Range
Kenmore
91192812300
Range
Kenmore
91192812301
Range
Kenmore
91192814300
Range
Kenmore
91192814301
Range
Kenmore
91193490010
Range
Kenmore
91193490300
Range
Kenmore
91193491990
Range
Kenmore
91193491991
Range
Kenmore
91193498990
Range
Kenmore
91193498991
Range
Kenmore
91193501990
Range
Kenmore
91193501991
Range
Kenmore
91193508990
Range
Kenmore
91193508991
Range
Kenmore
91193512010
Range
Kenmore
91193514010
Range
Kenmore
91193581990
Range
Kenmore
91193581991
Range

Get in touch, we're here to help!

Open until 10PM EST

Contact Customer Service