( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Water Filter

★★★★★
★★★★★
4 Reviews

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Subscribe to save!

Subscribe to get on your entire order today, and on all automatic reorders!

Deliver every:

PartSelect Number PS2351893
Manufacturer Part Number 4378411RB
Manufactured by Whirlpool
Product Description

Water Filter Specifications

This OEM filter measures 2.4-Inches long, 2.4-Inches wide, and 11.5-Inches high. It has an NSF 42 certified coconut shell activated carbon filter. It provides filtered water for refrigerators, icemakers, and freestanding icemakers. By filtering out common particles and reducing lime scale buildup, this helps to protect your machine, making it last as long as possible. To ensure the highest quality of water and smooth operation, replace this filter every 6 months or 1500 gallons. These parameters can vary depending on your local water conditions. This filter fits refrigerators with filter access that is located on the back of the appliance, it also fits under the sink. It is meant for refrigerators that do not have built-in filters. It is installed on the water line. This package comes with 1/4-Inch quick connect fittings, which can be used in both copper or plastic 1/4-Inch water lines. To install, first turn off the water supply to the filter. When you disconnect the filter from the water supply be prepared for water to drip. Hold the plastic fitting against the filter body and pull the water line directly out. Repeat this step for the other end of the filter. Cut the mounting straps to release the old filter. Place the incoming water supply line about 5/8-inches into the inlet port of the new filter through the plastic fitting. Be sure to install the filter using the flow direction arrows. Turn on the water supply to allow water to flush the filter. Now connect the outlet part of the filter to the waterline going to the equipment. Remove the adhesive part of the mounting pads and place in the direction that matches the tubing. The filter should be placed over the mounting pads and the straps should be looped around the fittings in the filter body.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool.
Part# 4378411RB replaces these:
AP4415498, 1603265, 11-200, 14200105, 18001001, 18001001A, 4210359, 4210508, 4210573, 4378411, 4378411P, 4378411RP, 4378442, 8004, R0183114, R1831-14, WF260, WF270
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Lucy
    August 8, 2017
    How do u get the old filter out, need a good description..thx.
    For model number WRS325DAW01
    Hi Lucy, First you will need to turn off your water supply. The easiest and quickest way to remove your old filter from your tubes is to cut it off from both ends. Use a pair of sharp scissors and try to make the cut as straight as you possibly can. This will help make it easier for installing the new filter. If the tubes are not flush in your new filter it will cause a leak. First work on installing the tube on your Inlet side (or the side that has the cap on the end). You will take your tubing and press it into the Inlet portion of your new filter until it cannot go in any farther. You will feel a very slight click into place, as there are push fittings on this filter. For this next part you will need a large bowl or a bucket. Turn your water supply back on and ensure that the water goes through your new filter. What you will see is black water coming out of your filter. That is just the carbon releasing from inside of the part. You need to have your water run through that filter until the water becomes clear again. After your water is completely clear, turn off your water supply again. Install the other tubing that leads to your appliance just like you had done with the inlet side. Pushing the tubing into the port until it cannot go any farther. After you have installed your filter, make sure to run at least 2 - 4 liters of water through your water dispenser in your fridge to make sure that your water has stayed clear. I hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    John
    December 31, 2019
    Where is the filter and which filter do i order?
    For model number 79579023312 Kenmore Elite
    Hello John and thank you for writing. The model number you provided is not recognized. Please verify the number you provided us. If it is correct, we recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part! We hope this helps. Please contact us anytime if you require further assistance.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Brian
    June 20, 2019
    Please let me know, if you have a filter for this fridge.
    For model number Gr2fhmxp002
    Hi Brian, thank you for your question. Looking at your model information the manufacturer does not list that this appliance has a filter. If yours does then it is likely an in line water filter. We would need you to get us the part number of that in line water filter (it is usually located on the outside information on the filter itself) and we can search it that way for you. If you do not have one then you would have to get an in line water filter to install on your appliance between your water inlet valve and the hose that comes from your home. Thank you. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Williemae
    July 24, 2019
    Do this Whirlpool need a filter i cannot located
    For model number ED2CHOXKBO7
    Hello Williemae, thank you for inquiring. The replacement Water Filter for your model is part number PS373165.

    Was this helpful?
    Thank you for voting!
    Vicki
    October 25, 2019
    How do you change water filter on a KitchenAid refrigerator, model #ksr25qdal0?
    For model number KSRS25QDAL03
    Hi Vicki, thank you for your question. First you will need to turn off your water supply. The easiest and quickest way to remove your old filter from your tubes is to cut it off from both ends. Use a pair of sharp scissors and try to make the cut as straight as you possibly can. This will help make it easier for installing the new filter. If the tubes are not flush in your new filter it will cause a leak. First work on installing the tube on your Inlet side (or the side that has the cap on the end). You will take your tubing and press it into the Inlet portion of your new filter until it cannot go in any farther. You will feel a very slight click into place, as there are push fittings on this filter. For this next part you will need a large bowl or a bucket. Turn your water supply back on and ensure that the water goes through your new filter. What you will see is black water coming out of your filter. That is just the carbon releasing from inside of the part. You need to have your water run through that filter until the water becomes clear again. After your water is completely clear, turn off your water supply again. Install the other tubing that leads to your appliance just like you had done with the inlet side. Pushing the tubing into the port until it cannot go any farther. After you have installed your filter, make sure to run at least 2 - 4 liters of water through your water dispenser in your fridge to make sure that your water has stayed clear. I hope this helps!

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 4.4 / 5.0, 2 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        no ice
        Removed three screws as illustrated in the instructions, disconnected the wiring from ice maker to freezer. Replaced ice maker component in reverse order.
        Other Parts Used:
        Replacement Ice Maker
        • Louis from Stotts City, MO
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Nutdriver, Screw drivers
        5 of 18 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        The water filter needed to be replaced.
        Turned the water off, took off the old filter, added the new one.
        • Jolene from West Valley City, UT
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Wrench (Adjustable)
        4 of 17 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          4 Reviews
          4.3
          Filter By Rating:
          • 5 Stars
            2
          • 4 Stars
            1
          • 3 Stars
            1
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS2351893
              Manufacturer Part Number: 4378411RB
              Brand
              Model Number
              Description
              Whirlpool
              2-A Y
              Refrigerator - Whirlpool Refrigerator Model 2-A Y (2AY, 2 A Y) Parts

              Get in touch, we're here to help!

              Open until 1am EST

              Contact Customer Service