Part Location Diagram of 903136-9020 Frigidaire Surface Burner Infinite Switch - 240V
See part F54A in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Surface Burner Infinite Switch - 240V 903136-9020

★★★★★
★★★★★
14 Reviews

Rated by 2 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 84.22
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS2350014
Manufacturer Part Number 903136-9020
Manufactured by Frigidaire
Product Description

Surface Burner Infinite Switch - 240V Specifications

This is a 240-volt surface burner infinite switch for a range or oven. It is for an 8-inch element. This part turns your surface element on and off, and regulates the desired heat of your element. The switch is made of off-white plastic and metal.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Frigidaire, Kenmore.
Part# 903136-9020 replaces these:
AP4368336, 1486478, 318220021, 318220081, 318369616, 9031369020
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
14 Reviews
4.4
Filter By Rating:
  • 5 Stars
    10
  • 4 Stars
    2
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 2 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
No power to burner until after dial setting 3 reached and would not reach highest setting.
1. Remove all four control knobs.
2. Unscrew all four plastic "nuts" found under each knob holding front
panel to stove.
3. Lift front panel off.
4. Removed all Phillips screws holding metal shield to which control
switches are fastened.
5. Lift entire assembly up.
6. Remove two screws holding bad switch to metal shield.
7. BEFORE REMOVING ANY WIRES LABEL EACH WIRE
ACCORDING TO CODE EMBOSSED ON BACK OF BAD
SWITCH. These will be H1, H2, L1, L2 and P. They are not in
the same place on the new switch as they are on the old one.
The reason for labeling is that in case you make a mistake you
have this back-up to go by. Also to double check your finished
job.If just one wire is connected to the
wrong terminal a disaster will happen.
8. Remove each wire, one at a time from the old switch and connect
it to the correct terminal on the new switch as indicated by the
codes on the back of the new switch. When done double check
to be certain the labels on each wire match the code for the
connected terminal.
9. Slide furnished bushing onto the new switch.
10. Insert new switch through the back of the metal shield and attach
with the supplied screws. The old screws were too short in my
case so be certain to use the ones supplied with the new switch.
11. Re-attach the shield assembly to the stove.
12. Install the front panel back over the switch stems.
13. Secure the front panel with the four plastic nuts.
14. Install the control knobs.
15. Test the new switch.
  • Ronald from FRENCH VLG, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Range eye stayed on
Turned off breaker to range then removed all element control knobs. Unscrewed retaining collars I suppose is a good word removed panel. Then removed bad switch installed removed one wire at a time and placed on new switch in proper places. Reassembled in reverse order turned breaker back on worked perfect.
  • Billy from Kingsport, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
5 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

13 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
January 12, 2018
The r front burner now only stays on the highest setting is this the part to correct that
For model number FES366ECF
PartSelect logo
Hello Mike, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS820835 for the right front dual burner switch. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Ted
April 7, 2018
Wiring diagram from old switch to new stile switch
For model number fes367dsc
PartSelect logo
Hi Ted, Thank you for the question. Very sorry but we do not currently have a wiring diagram, but the Black goes to L1, Red to L2, Yellow to H1, Yellow to H2, and Orange to P. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Usain
November 1, 2019
Hello, the left front burner now only stays on, is this the part to correct that. (the burner is 9 to 10 inch ). Thanks
For model number CFES366FC4 / PART NO:PS2350014
PartSelect logo
Good Day Usain. Thank you for your question in regards to your unit (Model Number CFES366FC4). Based on our research you may need to replace one or more of the following parts: 1) Element (PartSelect Number PS1528767). 2) Surface Burner Infinite Switch Kit (PartSelect Number PS2350013). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Sean
November 20, 2019
Can you find the part numbers for control switches for both small and large burners for my model? I’m only seeing the 8” switch number. Ty
For model number 790.46582501
PartSelect logo
Hi Sean, thank you for your question. Here are those two parts for you: PS2350013 and PS2350014. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Janie
October 4, 2023
Front right large burner turns on to high only. What switch do I need to correct this? Thank you.
For model number 79046579400 Kenmore
PartSelect logo
Hello Janie, thank you for your inquiry. If the burner is on a high setting only, you may need to replace the surface element switch, part number PS2350014, to fix the issue. It is for an 8 inches element. This part turns your surface element on and off and regulates the desired heat of your element. We hope this solves your problem!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Gene
February 12, 2019
Will the ps2350014 switch fit for the 6" burner as well as the 8" burner? Thanks
For model number fes365ebd
PartSelect logo
Hello Gene, Thank you for your question. PS2350014 works with the back left burner on the cook top. Have a great day.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Mark
June 4, 2019
Is this the part for big right front burner? My range f r burner stays on until i turn off breaker.
For model number Fridedaire FES367DSC
PartSelect logo
Hello Mark, thank you for writing. Yes, this is the Switch for the right front Burner on your model and should fix the issue.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Joe
December 26, 2019
Kenmore range. Are all four switches the same? I'm having issues with the back left one. Difficult to turn on, then it will not turn off.Thanks
For model number 79046593500
PartSelect logo
Hi Joe, Thank you for your question. Not all of the switches are the same. The switches for the left and right rear burners are the same. The part number listed under your model number for the left and right rear burner switch is PS2350013. The part number for the left front burner switch is PS2350014 and the part number for the right front burner switch is PS820835. We hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Fred
May 20, 2022
The left switch of my Kenmore electric range model 790.46354400 doesn't work properly. When I put it to 'OFF', it doesn't shut off the big element on the left. It shuts the element off when I switches it to '8'. Do you think it's a switch problem? If so, what is part number of the switch I should purchase? Thanks!
For model number 79046354400
PartSelect logo
Hello Fred, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2350014. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Joseph
November 16, 2022
right rear control switch will not shout off
For model number 790.45074400
PartSelect logo
Hello Joseph, thank you for reaching out. We have researched your model and found that the issue is likely with the Dual Infinite Switch, part number PS820835. This switch controls the dual surface element. If you require assistance to place an order, please contact customer service. We hope that helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2350014
Manufacturer Part Number: 903136-9020
Brand
Model Number
Description
Kenmore
79045062400
Range
Kenmore
79045062401
Range
Kenmore
79045069400
Range
Kenmore
79045069401
Range
Kenmore
79045071400
Wall Oven
Kenmore
79045072400
Wall Oven
Kenmore
79045072401
Wall Oven
Kenmore
79045074400
Wall Oven
Kenmore
79045074401
Wall Oven
Kenmore
79045079400
Wall Oven
Kenmore
79045079401
Wall Oven
Kenmore
79045252400
Range
Kenmore
79045254400
Range
Kenmore
79045262500
Range
Kenmore
79045262501
Range
Kenmore
79045262502
Range
Kenmore
79045262503
Range
Kenmore
79045264500
Range
Kenmore
79045482500
Range
Kenmore
79045482501
Range
Kenmore
79045482502
Range
Kenmore
79045489500
Range
Kenmore
79045489501
Range
Kenmore
79045489502
Range
Kenmore
79045492500
Wall Oven
Kenmore
79045494500
Wall Oven
Kenmore
79045499500
Wall Oven
Kenmore
79046252400
Range
Kenmore
79046254400
Range
Kenmore
79046262500
Range
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service