Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brenda K - September 13, 2020
Verified Purchase
Perfect fit and easy to install!
The updated dishwasher rack is a far better design than the original. It was easy to order and arrived earlier than expected. It was a perfect fit. The online video made installation very simple. Highly recommend.
★★★★★
★★★★★
Leann R - July 30, 2020
Verified Purchase
Uppeer Dishrack
Dishrack was not the same as the original but worked! So happy. Appliance repairman told me a rack was not available for my old dishwasher.
★★★★★
★★★★★
Sherman M - June 12, 2020
Verified Purchase
Dishrack
Just what I needed .
★★★★★
★★★★★
Nancy T - May 15, 2020
Verified Purchase
You Exceeded my Expectations
I feel like it was mere moments from when I clicked Submit until the part arrived ... very fast response ... and the part fits PERFECTLY. Thank you so much.
★★★★★
★★★★★
Vernon S - February 12, 2019
Verified Purchase
Easy replacement
The part was as advertised and fits perfectly.,
★★★★★
★★★★★
Lynne C - November 19, 2018
Verified Purchase
Excellent customer service
Appreciated the on-line video that clearly explained installation.
★★★★★
★★★★★
Bev S - November 19, 2018
Verified Purchase
Easy repair
The part works great. Arrived quickly and works well. Only thing it was a silver one instead of white.
★★★★★
★★★★★
Ellen C - November 11, 2018
Verified Purchase
Dish washer $ saver
Our dishwasher works terrific but the rust 'did-in' the upper rack. This replacement part, while not identical, does the trick! It was easy to install and we now have a useable dishwasher once again. Part cost of $182 versus a new dishwasher at $$$ - what can I say.
Thank you Parts Select.
★★★★★
★★★★★
Everett H - November 8, 2018
Verified Purchase
better than the bottom rack
This rack arrived with no broken wheels (my bottom rack wasn't so fortunate) and fit the rails properly (again, much better than the bottom rack). It installed easily and is working fine.
★★★★★
★★★★★
Anne H - November 7, 2018
Verified Purchase
Easy replacement
Received the upper rack and the replacing of the old one was super easy! I just watched a video on how to replace and was surprised how easy it was to replace.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 41 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Stained upper and lower dishwasher racks.
Pretty easy. Lower rack, simple. Upper rack took some time to figure out how to remove the plastic rack stops. After that just removed old rack then installed new rack and reattached the stops. Reason for replacing racks, with the door closed, there was a back wash from an ailing garbage disposal into the dishwasher which was left in ther
... Read moree for awhile. It stained the racks beyond repair. I replaced the disposal along with under sink drain pipes, which were rotten, with plastic piping. DIY and save a lot of money.
Racks were old and had many pieces rusted and broken off
Top rack locking caps removed and replacement rack slid right in. Bottom rack slightly more difficult as I had to figure out how to remove spray tower from old rack. Used flat screwdriver to pry gently up on locking tabs and twisted to remove. Pushed down and twisted opposite way until engaged locking tabs.
Upper dishrack had rust and corrosion Several upright tines were broken off/
Just slide the old upper dishrack forward to the end. The stops on either slide must be removed . Only difficulty was getting the plastic stops to open up. We used a thin metal knivre to wedge into the opening.
Robert from WENONAH, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
worn out top dishwasher rack
watched the video instructions and followed them. ;Very easy.
Mary from SPENCER, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old dishrack was rusting apart
First you must understand that the end cap is not a solid piece. The plastic facing you is wrapped over the piece behind it. The separation may be obscured by age. Wedge thin bladed screwdriver into the outside edge of end cap at the bid point, a sturdy hunting knife will probably work better. When you hit the seam, pry it apart and f
... Read moreold it back. Unwrap the part and repeat on other side. The dishracks will easily slide out and in.
Replaced upper and lower racks. The new lower rack has a design flaw: it has 3 wheels on each side, but should have 4 wheels on each side. When you pull out the bottom rack, the last set of wheels drop down into the open space where the door hinges to the cabinet, causing the dishes to bounce and shake around. Then when you push rack i
... Read moren, you have to lift it back up onto the tracks made for the wheels to roll on. You can't pull the bottom rack out far enough to access the back of the rack very well.
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Denise
January 13, 2018
Top rack is broken. I am trying to figure out if i need to order the whole rack or the parts. Which would be economical. The plastic wheels snapped off the top rack. Can you help direct me on what parts i need. The track inside dishwasher with bars seems to be fine. Thank you!
For model number KUDS30FXSS3
Hello Denise, Thank you for your inquiry. If it is just the wheels that broke off and the rack itself is fine, all you may need is the rack adjuster kit part# W10712394. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
David
November 27, 2018
Back right wheel of upper rack has come loose from rack. Can I replace the single wheel or do I need to replace the entire upper rack?
For model number MDB6000AWA
Hello David, Thank you for the question. Yes, the wheel can be replaced. You will need PartSelect Number PS11746834. Thank you for your inquiry, good luck with this repair!
The top dish rack on the right side has a small almost half a foot long plastic clip on which there are two wheels for rolling in the slides when pulling out. One of the wheels have broken off making the tray unable to use. How can I get this clip-on plastic strip with the wheels and where
For model number MDB9100AWW
Hello Paul, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part #: PS11747642. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sara
January 23, 2020
Is it white?If it doesn't fit may i return it?
For model number upper ds upper rack for maytag Model #MDB7130AWW
Hello, Thank you for your question. Looking at your model that is the correct dishrack for your model. If it does not work you can contact our customer service to get return information. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Donald
April 5, 2022
On the top tray right side the slide is broken. There are 2wheels on the bar. One wheel comes off the spindle. Is there a replacement part for my problem?
For model number MDB7100AWQ
Hello Donald, thank you for your question. Yes, there is a replacement wheel part PS11746834 that is sold individually and we have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
The top rack left side. Bracket and roller wheels have broken. I would like parts number if possible. Thanks in advance.
For model number WDT910ssymo
Hello Larry, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS10065979 for the Rack Adjuster Kit - White Wheels. This is a kit that includes all parts required to make up 2 rack adjusters (right and left) and 2 adjuster actuators (right and left). Parts would need to be assembled. The wheels are only sold as part of this kit. Hope this helps!
Hello -- is it typical for baskets to rust out and break apart? Both upper and lower baskets have rusted out areas and are now breaking off. The baskets are as much as replacing a dishwasher, please advise.Thank you.
For model number DW861UQP
Good Day Miriam. Thank you for your question in regards to your unit (Model Number DW861UQP). We do apologize but we were not able to locate the information you requested. For more specialized assistance or to speak with someone about this, we recommend calling the manufacturer of the equipment directly. Best Regards.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cindy
December 27, 2021
The top rack only is disintegrating. What is the return policy if it doesn’t work?
For model number DWU8402AAB
Hello Cindy, Thank you for the question. Here is a link to our 30 day return policy. We hope this helps!
