Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steven
February 26, 2018
I have the replacement drive bar for the ice maker. How do I get the old rusty one off?
For model number PHS69EJSS2
Hi Steven, Thank you for the question. The drive bar is just screwed in place. If it is rusted on and hard to remove you can try to use a pair of 45° needle nosed pliers and place them behind the drive bar and apply force on it away from the motor. While applying force, you can use a hammer to tap on the drive bar, to get the drive bar to grab the threads and thread off. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Cleve
8 days ago
The drive bar #10 that turns the ice auger pushes the ice bucket forward when activated causing the auger to 'cam' away from the drive bar. If the leading edge of the longer arm on the drive bar had a depression on it, that would trap the drive bar on the auger drive so it wouldn't jump off.
Is there another solution I don't know about?
For model number FFHS2611LWKA
Hello Cleve, thank you for your inquiry. According to our research, the issue is most probably with the drive cam, part number PS1526413. It rotates the auger to push ice into the dispenser chute. You may need to replace it to fix the issue. We hope this helps!
