Part Location Diagram of 241684503 Frigidaire DRIVE BLADE
See part 17 in the diagram
Replacing your Frigidaire Refrigerator DRIVE BLADE
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

DRIVE BLADE 241684503

★★★★★
★★★★★
3 Reviews

Rated by 8 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 13.70
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS12728807
Manufacturer Part Number 241684503
Manufactured by Frigidaire
Product Description

DRIVE BLADE Specifications

This drive blade is a little under five inches long. It is used for the icemaker of many refrigerators.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Refrigerator DRIVE BLADE

Replacing your Frigidaire Refrigerator DRIVE BLADE
Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Ice maker not making ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Electrolux, Crosley.
Part# 241684503 replaces these:
AP6893193, 241684501, 5304404345, 7241684501
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 8 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Ice maker would not dischare ice
Followed the online video from this site
  • DAVE from CRESTON, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice was not allowed to be dispensed because of worn part on auger.
Followed instructions in video that was suggested when I placed the order.
  • Craig from AIKEN, SC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker not pushing out ice
Consult the exploded view of the Ice Container on this site. A likely cause the end plate (17) is worn. This plate connects the rotating corkscrew to the final plastic worm that pushes the ice into the crusher and thence to your waiting glass. The worm alone will not do the trick. To replace this plate, you need to take out all of the screws you can see, including the one that holds the spring for the crusher select bar.. First, the front cover, then the plate, and finally, locking ring from the worm and the black housing for the crusher. Now you can remove the whole worm assembly. Using a cloth or rubber insulator to protect it, unscrew the end screw and slide off the crusher teeth. Store on the table as a unit to facilitate re-assembly. Slide off the old bar and worm, put them back, and re-assemble. Takes a little dexterity to get the crusher select bar back, but not hard. Easy job.
Other Parts Used:
Ice Dispenser Drum DRIVE BLADE
  • Andrew from SALEM, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Would Not Dispence
Took the ice storage bin out. Took the unit apart,and disamble the augar unit. Ordered parts from manufacture, which arrived in two days. As soon as I got the parts, I reassambled it. Work perfect. Good job!
Other Parts Used:
Ice Auger DRIVE BLADE
  • Jerry Baten from Pampa, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
16 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rust on Front Plate and Drive Blade
Downloaded a schematic of the ice container. Disassembled the ice container, keeping track of which different type of screws went where. Followed the schematic to ensure proper sequence of blades and spacers. Manually rotated unit prior to installing into the freezer in case of binding. Finished.
Other Parts Used:
DRIVE BLADE Front Plate
  • Wayne from Westford, MA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rust had corroded Front Plate and Drive Blade
Installation was completed by following the online Parts diagram. Had to completely remove all parts, including the blades in ice crusher, and re-assemble. Glad the online diagram was clear and easy to read.
Other Parts Used:
DRIVE BLADE Front Plate Screw
  • Calvin from Massillon, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
11 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker would not rotate out cube or crushed ice.
1. Remove outer plastic face cover (4) screws.

2. Revove (1) U type nut keeper & (1) metal washer.

3. Remove (1) plastic nut on end of metal auger.

4. Remove inner plastic cover (4) screws and disconnect control rod. (Note postion of control rod befor disconnecting)

5. Note position and order of metal blades and plastic spacers on auger before siding off the end of auger to reposition them upon re-assembly.

6. Remove metal support panel from end of ice bucket (4) screws.

7. Remove auger & plastic cylinder from ice bucket.

8. Remove - slide drive blade off auger.

9. Drive blade replaced.

10. Re-assembled other items removed in reverse order
  • David from Ponca City, OK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
40 of 58 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice not depensing, Door rubbing
Remove Ice dispenser from freezer, removed all screws that hold auger & blades, by remove ring & washer. Removed blades replaced broken drive blade and re-assembled. Removed ref. door install new bearing at bottom re-installed door. Both job very easy.
Other Parts Used:
DRIVE BLADE TRIM-CABINET CORNER Hinge Bearing
  • Dominick from Las Vegas, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug
April 8, 2022
The ice maker dispenser will not dispense ice correctly. In looking at the dispenser bin I see nothing broken but there is a blade on the auger that you can tell is supposed to be attached to the round wheel that rotates and pushes the ice out of the dispenser in the door into your glass. This blade is not attached to the wheel any longer but is free to slide back and forth on the auger. Is there a clip or something that attaches to the auger behind this clip to keep it in place on the wheel so the ice will come out?
For model number FGHC2331PF7
PartSelect logo
Hi Doug, Thank you for your question. We have included a link to one of our YouTube videos that you may reference on how to install the driver blade. The refrigerator in the video may appear different from yours, but it will give you a general idea on how to install the part. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!

2 people found this helpful.

Was this helpful?
Thank you for voting!
George
March 11, 2023
My augar rotates but does not produce ice cubes. The metal blade is detached and seems like the wheel doesn't turn. Does the metal blade seems to be the problem?
For model number fs26lfdsb
PartSelect logo
It may be that ice clump has formed inside. Remove the ice bin, thaw and empty contents. Clean the ice bin (wipe/dry) and replace. The metal blade is necessary. You will need to replace it. Or, if the parts that it attaches to has been damaged, the Drum PS1526412 or Auger PS1526550 they will need to be replaced. There is also an option for a Complete Assembly PS1991430. We have videos for all three parts so that you may view the repairs. We are pleased to have been able to help.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Gerald
July 25, 2023
ice cubes dispense, but it will not crush ice any more
For model number LFSS2312TPD
PartSelect logo
Hi Gerald, thank you for the question. If your dispenser only dispenses cubed ice and not crushed ice, then the ice dispenser solenoid, part number PS8691994, is most likely faulty and may need to be replaced. We hope this information helps!

Was this helpful?
Thank you for voting!
Related Parts:
Alvin
16 days ago
Ice not being crushed. Found crushing blades bend to point of no alignment for proper functioning. How do you repair, replace damaged parts?
For model number FFSS2615TS0
PartSelect logo
Hi Alvin, thank you for getting in touch. We would recommend replacing the drive blade, part number PS12728807, to fix the issue. We do not recommend using repair hacks. Glad to be of help!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12728807
Manufacturer Part Number: 241684503
Brand
Model Number
Description
Kenmore
25344302400
Refrigerator
Kenmore
25344302401
Refrigerator
Kenmore
25344303400
Refrigerator
Kenmore
25344303401
Refrigerator
Kenmore
25344303402
Refrigerator
Kenmore
25344303403
Refrigerator
Kenmore
25344304400
Refrigerator
Kenmore
25344304401
Refrigerator
Kenmore
25344309400
Refrigerator
Kenmore
25344309401
Refrigerator
Kenmore
25344333600
Refrigerator
Kenmore
25344333601
Refrigerator
Kenmore
25344333602
Refrigerator
Kenmore
25344333603
Refrigerator
Kenmore
25344333604
Refrigerator
Kenmore
25344333605
Refrigerator
Kenmore
25344333606
Refrigerator
Kenmore
25344333607
Refrigerator
Kenmore
25344333608
Refrigerator
Kenmore
25344333609
Refrigerator
Kenmore
2534433360A
Refrigerator
Kenmore
25344352400
Refrigerator
Kenmore
25344352401
Refrigerator
Kenmore
25344352403
Refrigerator
Kenmore
25344352404
Refrigerator
Kenmore
25344352405
Refrigerator
Kenmore
25344352406
Refrigerator
Kenmore
25344352407
Refrigerator
Kenmore
25344352408
Refrigerator
Kenmore
25344352409
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service