* You searched for 62349 but the manufacturer replaced it with this part.

( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

SVC-LAMP HOLDER LEVITON 8871;62349,DH300 DE81-04007A

 Fits your 62349!

Rated by 1 customer 

Difficult 

More than 2 hours 

Ratings submitted by customers like you who bought this part.

* You searched for 62349 but the manufacturer replaced it with this part.

$ 11.22
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 62349!
PartSelect Number PS16628461
Manufacturer Part Number DE81-04007A
Manufactured by Samsung
Troubleshooting
This part works with the following products:
Range Hood.
This part works with the following products:
Dacor.
Part# DE81-04007A replaces these:
62349
Back to Top
Customer Repair Stories
 Average Repair Rating: 1.5 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Hood lights blink on and off. When you wiggle the bulb it goes on but does not stay on.
I had to remove the underside sheet metal (two separate parts) by unscrewing the screws securing them to the hood. The sheet metal piece that covers the fans had to be fully removed to be able to access the sheet metal part to which the light sockets are attached. There are vertical legs that connect this second assembly to the roof of the range hood so this part could not be removed to work on it. I was able to move this part enough to get vision on the brackets that held the light sockets In place. I removed the old light sockets and the rivets securing the internal electricity conduction parts of the socket were loose and trying to solder them did not improve their ability to make good contact and keep the bulbs lit. I therefore had to order replacement sockets. The shipment of these sockets was delayed and I had to put the range hood back together for Christmas Eve party so I found a different type of ceramic socket at the local hardware store and I was able to use those to replace the defective sockets that came with the range hood. I was actually happy with this different socket because I felt that the quality of design and materials in the factory socket would lend itself to malfunction again in the future. The new design socket that I installed seemed far more sturdy and less likely to fail in the future. Unfortunately these new sockets were slightly shorter in length than the ones I was replacing. As a result I had to modify the Dacor light trim rings to allow the bulb to screw in about a 1/4" further than the stock socket required. All in all about a 4-5 hour job with a trip to the hardware store and lots of research on line. I will say that despite contacting appliance repair companies all around the Bay Area, I did not find one that was willing to work on my Dacor Range Hood. That's why I had to do the DIY thing. Now I'm an expert.
  • David from WALNUT CREEK, CA
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Be the first to ask our experts a question about this part!

You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16628461
Manufacturer Part Number: DE81-04007A
Brand
Model Number
Description
Dacor
IVS1
Range Hood - Vent System
Dacor
IVS2
Range Hood
Dacor
MH3009S
Range Hood
Dacor
MH3018S
Range Hood
Dacor
MH3609S
Range Hood
Dacor
MH3618S
Range Hood
Dacor
MH4809S
Range Hood
Dacor
MH4818S
Range Hood
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service