Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Orla
August 12, 2022
Looking to replace a water inlet valve. Is this the correct part?
For model number GDP645SYN3FS
Hello Orla, thank you for writing. Yes, the Water Valve PS16217027 you had chosen is compatible with your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
February 4, 2023
Does this valve part also fit the newer Adora dishwasher?
Thanks
For model number DDT700SSN5SS
Hello John, Thank you for your inquiry. We have researched the model number that you have provided and confirm that this water filter will also fit that model. Good luck with your repair.
Was this helpful?
Thank you for voting!
Glenn
October 28, 2023
Need detailed instructions on how to install the water valve assembly
For model number GDF630PSM4SS
Hi Glenn, thank you for reaching out. We have found the instructions to install the water valve assembly. These may not be of the same model but will help you in installation. You may need to follow these steps:
1. Shut off the water supply valve.
2. Use the driver to un-thread the screws securing the toe kick and set it aside.
3. Use Pliers to un-thread the water supply line elbow fitting from the inlet valve.
4. Use a drill driver to un-thread the screw to release the junction box cover.
5. Use the screwdriver to un-thread the strain relief nut and power wires from the junction box.
6. Disconnect the drain hose from the sink drain or garbage disposal and feed it through the cabinet.
7. Un-thread the mounting screw securing the dishwasher to the countertop cabinet or floor.
8. Use the pliers to compress the hose clamp and release the filler hose from the water inlet valve.
9. Unplug the wire harness from the inlet valve.
10. Un-thread the screws that secure the valve and then remove the valve.
11. To install the new water inlet valve, follow the same steps backward.
We hope that information helps!
Was this helpful?
Thank you for voting!
Rod
November 11, 2023
I am having problems with water pressure in the washer. The spray arms are not rotating when the washer cycles. The washer does fill and drain appropriately. I was thinking it may be the water inlet valve?
For model number CDT805P2N3S1
Hello Rod, thank you for your inquiry. Based on the description that you have provided, we would recommend replacing the circulation pump, part number PS12741248, to fix the issue. It delivers water to the spray arms to clean your dishes. We hope that helps!
