Easy
1617491-1-M-Whirlpool-56095-Multi Rib Belt
Part Location Diagram of 56095 Whirlpool Multi Rib Belt
See part 19 in the diagram
( Grid squares measure 1x1 inch )
1617491-1-S-Whirlpool-56095-Multi Rib Belt 1617491-2-S-Whirlpool-56095-Multi Rib Belt Part Location Diagram of 56095 Whirlpool Multi Rib Belt
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Multi Rib Belt 56095

Rated by 4 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

Really Easy 

30 - 60 mins 

Rated by verified customers 

?
$ 47.36
  Special Order

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS1617491
Manufacturer Part Number 56095
Manufactured by Whirlpool for Speed Queen, Amana, Caloric, Magic Chef

Jump to:

Product Description

Multi Rib Belt Specifications

At 93-1/8" inches in length, and 3/8 of an inch wide, this flat dryer drum belt has four ridges. It is all black in color and is made entirely of rubber. This belt is used for many gas and electric clothes dryers.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Dryer, Washer Dryer Combo.
Part# 56095 replaces these:
AP4061207, 845, 56095, R0606524
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 4 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
load banging noise when drun turns
removed front cover 2 lower screws. once front cover was off, the front drum support bracket was visable. removed 4 screws that hold that in. the drum is now loose and not supported in the front. pulled drive belt tensioner back to release belt. removed 2 top cover screws to get more vertical room to lift drum out. once drum was out, i used a snap ring plyers to take retainer ring off to remove damaged rear drum support rollers. replaced both rear rollers. also replaced drive belt and door lamp. the bearing in the left roller had seized and torn a big hole thru the roller . assembled in reverse order. now drum is nice and quiet
Read less
Other Parts Used:
Light Bulb - 10W Light Bulb - 7W Rear Drum Support Roller Kit Multi Rib Belt Multi Rib Belt
  • Randall from Hoffman Estates, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer tumbler belt broke
I opened the dryer by lifting the top and propping it open. I unscrewed two screws on either side with a flat-blade screwdriver, unclipped the dryer stop door micro switch. I slid the new belt over the drum to the center, then used the flashlight to see where it went. There is a tension wheel that had to be pulled to the right and with the belt in place release against the belt to apply constant pressure during operation. I vacuumed the dryer out and put it back together
Read less
  • John from Dillingham, AK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy dryer, sounded like drying tennis shoes
Ordered parts per recommendation of expert. Removed front of dryer, removed inner panel, replaced drum support roller, idler pulley shaft, and replaced the belt. Put inner front door on and then front of dryer, voila!!! It works just fine.
Other Parts Used:
Drum Support Roller - for round ported models Idler Pulley Shaft Multi Rib Belt
  • Cheryl from Flushing, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer would sqeak when starting, after running it would quiet down. I thought as long as I had another repair to do, I would replace the belt with a new one.
I removed two nut head screws on the base front panel. Pull the panel downward and the panel came off. Then I removed the two nut head screws off the bottom of the door frame.Pulled out the front frame and pulled slightly downward. I removed the wire connections that were on the door light switch. Then removed the door, and set it aside. With the door removed, I could see the dryer barrel and the belt wrapping around it. I then removed the front frame by taking out the four bolt head screws. I removed the frame panel. Looking in you can see the barrel with the belt around it. I slid the belt off to the rear of the barrel. I then slid the barrel out the front of the case. I then removed the belt. I installed the new belt around the idler arm and the motor shaft. (lay the belt in the rear of the case. Then reinstalled the barrel and set it on the two rollers in the rear. I then reached around the barrel toward the rear of the case and pulled the belt up and over the top of the barrel.Keeping the ribbed side down against the drum.
Put the front frame and four screws back on, keeping the barrel centered and seated in the frame front. Then reattach the door and door frame, making sure to rehook the wires for the door light switch. Then reattach the bottom two screws and the bottom panel. All done.
Read less
  • Gary from Wellsboro, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Affresh Washing Machine Cleaner - 3 pack
$12.58
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
  In Stock
Produce Preserver Filter
$21.50
  In Stock
Affresh Cleaner
$19.09
  In Stock
Cooktop Cleaner
$17.74
  In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
$21.14
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1617491
Manufacturer Part Number: 56095
Brand
Model Number
Description
Kenmore
1106702310
Washer
Caloric
EHS305
Range - Freestanding, Electric, Slide-in, Heritage Series
Caloric
EJS306
Range - Freestanding, Electric, Slide-in, Heritage Series
Speed Queen
FE0080
Dryer - Residential
Speed Queen
HE2003
Dryer - Residential
Speed Queen
HE2030
Dryer - Residential
Speed Queen
HE2050
Dryer - Residential
Speed Queen
HE2250
Dryer - Residential
Speed Queen
HE2430
Dryer - Residential
Speed Queen
HE2970
Dryer - Residential
Speed Queen
HE3003
Dryer - Residential
Magic Chef
HE3060
Dryer - Residential
Speed Queen
HE4003
Dryer - Residential
Speed Queen
HE4030
Dryer - Residential
Speed Queen
HE4070
Dryer - Residential
Speed Queen
HE4103
Dryer - Residential
Speed Queen
HE4203
Dryer - Residential
Speed Queen
HE4270
Dryer - Residential
Speed Queen
HE4330
Dryer - Residential
Speed Queen
HE4350
Dryer - Residential
Speed Queen
HE4430
Dryer - Residential
Speed Queen
HE4503
Dryer - Residential
Speed Queen
HE5003
Dryer - Residential
Speed Queen
HE5330
Dryer - Residential
Speed Queen
HE6003
Dryer - Residential
Speed Queen
HE6350
Dryer - Residential
Speed Queen
HE6370
Dryer - Residential
Speed Queen
HE6430
Dryer - Residential
Speed Queen
HE6434
Dryer - Residential
Speed Queen
HE6650
Dryer - Residential
Back to Top
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 9pm EST

Contact Customer Service
Multi Rib Belt
$ 47.36
  Special Order
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.