Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Andrew R - January 18, 2024
Verified Purchase
Temperature probe
Part arrived quickly and used it next day. Was able to use both ovens with temperature probes
★★★★★
★★★★★
Button W - April 22, 2023
Verified Purchase
Worked as expected
Works fine. Looks well built. The original probe looked fine also but fell apart after very few uses, and having used probes for over 40 years, I know not to tug on the wire. Hope this one lasts as long as the one that goes with my 30 year old convection/microwave.
★★★★★
★★★★★
Robert D - March 4, 2022
Verified Purchase
right part
right part for my range. I read reviews of cheaper parts that didn't work or had to be modified. I paid more. it works. I'm happy.
★★★★★
★★★★★
Thomas F - February 22, 2022
Verified Purchase
New meat probe thermistor to replace old frayed wire one.
I purchased and installed a GE In-wall Oven in 2008 and installed it. It has worked very well over the years but the wire on the probe end eventually frayed and it quit working in November of 2021. No complaints with that. I thought 13 years on a silicon coated wire probe was pretty good.
I had to find and purchase a new probe, especially since it roasts the meat in the oven to the exact temperature you set the probe for and stops the cooking. The probe from PartSelect works identically to the original equipment for this oven and I am very happy with the result.
PartSelect Number PS1481046
Manufacturer Part Number WB20T10024
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven meat probe broken
This item worked as described. I paid more for this 'oem' probe than the generic 1 because i didn't want to chance it not working as others have reported. - works great. tested it....snaps in, reads correctly, snaps out.
robert from FAIRFIELD, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Temp probe was defective
Threw the old one out - plugged the new one in. Steak came out just as ordered - medium rare.
Eric from SOUTHBURY, CT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Probe Sensor
Replaced it
Michael from Tucson, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
October 17, 2019
Will meat probe part # wb20x5050 work with my stove
For model number JGB918SEK4SS
Hello Paul, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS235360. Hope this helps!
Was this helpful?
Thank you for voting!
Marsha
January 28, 2020
Is this probe compatible with the above mentioned stove model?
For model number ZGP486LDRSS
Hi Marsha, thank you for your question. The correct meat probe for your appliance is: PS2353500. Good luck with your repair.
Was this helpful?
Thank you for voting!
Judy
October 14, 2021
I ordered and received the probe thermistor which matches the picture in my owner's manual. However, I cannot find the receptacle in my oven for the probe. My range was purchased in 2015. The probe which I ordered and received does not match the receptacle. I have a pad on the cook top for turning on the probe. Can you help?
For model number PS920SF3SS
Hello Judy, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1481046. The Jack for the Probe will be inside the oven, normally at the top in the front. We hope this helps!
Was this helpful?
Thank you for voting!
Don
March 31, 2022
Fits your PTD9000SN1SS!
PartSelect Number PS1481046
Manufacturer Part Number WB20T10024
Will this probe fit my GE Profile model # PTD9000SN2SS?
For model number GE PTD9000SN2SS
Hello Don, Thank you for your inquiry. We have researched the model number you have provided and confirm that this part will fit the PTD9000SN2SS as well. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Rick
December 5, 2023
does this replacement part include part the probe inserts into on door
For model number P2s975sem1ss
Hello Rick, Thank you for your inquiry. This part does not come with the harness it plugs into. We hope this helps.
Probe light stuck on and blinking - says remove and replace probe receptacle - need meat probe
For model number ZET1PH1SS
Hello Susan, thank you for reaching out. The thermistor probe you are looking for is part number PS1481046. If you require assistance to place an order, please contact customer service!
