Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Walter D - January 23, 2020
Verified Purchase
Worked as recommended
Was easy to install. Part was not available at House of 100,000 Parts in Milwaukee nor was
it available at its supplier.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
December 13, 2019
Our glass top range was not working so i figured it may be dirty under the glass pad ,as all that would work was the off button and warmer button . But when glass pad was off all the buttons would work . And when i reinstalled the glass pad only the warmer button and off button would work ,so i was wondering if i replaced the harness wire glass touch part # ps1481006 it might fix the problem thanks in advance
For model number PCS968DP1WW
Hello Paul, thank you for writing. Yes, replacing this Glass Touch Wire Harness part number PS1481006 for your model range should fix the issue. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Frankie Joyner
November 28, 2019
Convection bake and bake touchpad will not respond for heating the oven 90% of time.How is this corrected?
thanking you
For model number PS968SP1SS
Hello Frankie, thank you for writing. If this Wire Harness for the Glass Touch Assembly looks intact and undamaged, then you will likely need to replace the Electronic Control, part number PS2370089 for your model range. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
January 3, 2018
I just purchased an ignitor for the lower oven on my range. The wire from the new ignitor does not reach the input on the range. Will this wire work?
For model number PGB995SET2SS
Hi Richard, Thank you for the question. This harness is for the glass touch pad not the igniter. Checking the model number I am showing there is no additional wire harness needed for the igniter. I suggest checking to make sure the correct igniter for the model number was ordered.Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Armand
February 25, 2019
How difficult is it to install?
For model number Cgs980sem3ss
Hi Armand,
Thank you for your question. The repair for this part is rated as fairly easy and it should take approximately 15 minutes to do it. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
