The Water filter reduces contaminants such as lead, iron, and chlorine from drinking water. This OEM filter is a genuine part manufactured by LG for use in refrigerators. We recommend you replace every 6 months or 200 gallons for best performance.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert S - January 26, 2024
Verified Purchase
Received new part. Working good
Yes, it is in good condition. Working perfect.
★★★★★
★★★★★
Keith Y - March 14, 2020
Verified Purchase
Easy repair
The part is working well
★★★★★
★★★★★
Marsha M - November 28, 2018
Verified Purchase
Easy
It was the correct part and the installation was easy
★★★★★
★★★★★
Deborah H - October 17, 2018
Verified Purchase
easy replacement of water filter
seems to be working
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
February 17, 2023
HOW TO INSTALL CANNOT FIND WHERE IT IS LOCATED TO INSTALL IN MY LG REFRIGERATOR I HAVE THE FILTER BUT CANNOT FIND HOW TO INSTALL
For model number LMXS28626D/02
Hi James, thank you for getting in touch. The water filter is located on the left side of the LED lamps in the interior section. For filter replacement, we recommend you follow the following instructions:
(A) For filter removal:
1. If the top shelf, located below the water filter, is in the highest position, it will need to be removed.
2. Pinch the sides to open the water filter cover.
3. Pull the water filter downward and turn it anticlockwise before pulling it out. Make sure to rotate the filter completely before pulling it out of the manifold hole.
(B) For filter installation:
1. Remove the new water filter from its packaging and remove the protective cover from the O-rings. With the water filter tabs in the horizontal position, push the new water filter into the manifold hole and turn it clockwise until it stops.
2. Close the water filter cover. The cover will click when closed correctly.
After replacing the water filter, dispense 2.5 gallons of water (flush for approximately 5 minutes) to remove trapped air and contaminants from the system.
After changing the filter, press and hold the Water Filter button for three seconds to reset the indicator light. We hope this is what you were looking for!
4 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.