This front plate assembly, also known as a mullion or flipper, is a genuine replacement part designed for select LG and Kenmore French-door refrigerators. It serves a critical function by sealing the gap between the doors, preventing cold air from escaping and helping maintain consistent internal temperatures. Constructed from durable pla...Read morestic, it supports both the performance and appearance of the appliance. A failing mullion may result in poor sealing, visible gaps, increased energy consumption, and potential food spoilage. Replacing this component can restore proper door alignment and improve overall efficiency. Compatibility should be confirmed using your refrigerator’s model number prior to installation.
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as ...Read morethey commonly wear at the same rate. This is about 1 inch long and metallic in color.
This air filter assembly is a genuine replacement part designed to improve air quality inside select LG and Kenmore Elite refrigerators. Using activated carbon, it effectively traps and neutralizes odors and airborne impurities, helping maintain a clean environment that supports longer food freshness. The filter is housed within a dedicat...Read moreed compartment and should be replaced approximately every six months or when indicated by the refrigerator’s filter light. Installation involves locating the filter housing, powering off the appliance, removing the old filter, and inserting the new one with proper alignment. After installation, reassemble the housing, restore power, and reset the filter indicator to ensure accurate tracking. This OEM component ensures a precise fit and optimal performance for compatible models.
This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refrigerator door may not open and shut properly, and therefore it should be replaced.
This is a micro switch for various models of LG refrigerators. This switch is responsible for turning the ice dispenser on and off within the freezer compartment of the fridge. If this switch is damaged or shorted, it will cause the ice maker to work inconsistently, or not at all. This switch is different from the water dispenser switch, ...Read morewhich has an entirely different shape all together. Replacing this switch is simple and only requires a Philips-head screwdriver to disconnect the old switch and install the new one. This switch is a genuine OEM LG part and does not come with any other parts or accessories.
This door bin or door shelf is compatible with LG refrigerators. It is supplied directly by LG to ensure compatibility with your appliance. It is made of clear plastic and has dimensions of approximately 13 inches in length and 4 inches in depth. This bin is made to fit on the left door of your fridge. It is designed to hold bottles, jars...Read more, and condiments for easy access and convenience. It is recommended to replace your door bin if it is visibly damaged or can no longer support your food items. Each door bin is sold individually.
This water tubing clip holds the water fill tube in place in your refrigerator. The water fill tube attaches and supplies water to the ice maker/water dispenser in your fridge-freezer. If the tubing is in working order, but is hanging loose inside the unit, the issue could be that the clip meant to hold it in place is broken. If this is t...Read morehe case, you should look to replace the clip. This clip is made of black plastic, and is just over half an inch long. This is a genuine OEM replacement part, and is sold separately.
This genuine OEM ice maker assembly is compatible with various models of LG refrigerators. The assembly includes the icemaker unit, ice mold, water inlet valve, ice bin, thermostat, and wiring harness. It has a length of approximately 12 inches, and it is located within the freezer compartment. The ice maker receives water from the water ...Read moreinlet valve, where it is frozen into ice cubes. The ice cubes are then ejected from the mold into the ice bucket where you can easily collect the ice cubes at your convenience. If any one of the parts in the unit is faulty, you will need to replace the entire ice maker assembly. The signs of a faulty assembly include difficulties making ice, sudden unusual noises, and large blocks of ice in the ice mold or tray.
This is a door stopper designed for LG refrigerators. This white plastic stopper is made to ensure the refrigerator door closes properly. If your fridge door is not closing entirely, or if this closer is damaged, it needs to be replaced to fully keep your door closed. This closer is located on the bottom of the right refrigerator door and...Read more requires a screwdriver to replace it. This closer is a genuine OEM part and is sold individually.
This genuine automatic ice maker assembly helps restore reliable ice production in your refrigerator by automatically filling, freezing, and dispensing ice cubes into the storage bin. Designed to replace worn, damaged, or malfunctioning ice makers, it provides dependable performance and can typically be installed with basic tools. The ass...Read moreembly measures approximately 10.5 inches long, 5.5 inches wide, and 4.5 inches high.
This genuine OEM cover is both a protective shield and an aesthetic front for the deli drawer in your refrigerator. It has a clear color and is typically in the lower section of the fresh food compartment. It can become worn with repeated use over time or break due to accidental drops. Your refrigerator has covers in different sizes, so be sure to purchase the correct one for your model.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
My nephew accidentally forced the door closed last year, which resulted in the door having to be re closed manually folding back the flap. Ugh!
25 of 46 peoplefound this instruction helpful.
Tiziana from WARWICK, NY
Really Easy
Less than 15 mins
Nutdriver
Unscered 2 screws, unplug electrical connection under the screws, slide her flap into grooves, realign screw holes , and rescrew in. Done.
Was this helpful?
Thank you for voting!
Broken Door Mullion Spring
17 of 36 peoplefound this instruction helpful.
Maurice from SEATTLE, WA
Really Easy
Less than 15 mins
Screw drivers
Had to buy the entire door mullion because the spring broke, wasn't happy. Got the new part very quickly and it was a new replacement part number. Somewhat tentative. Took it out of the box and looked it over. No spring! Groan! Thought I got the wrong part. Flipped the bottom hinge and it snapped open, no need for a spring! Two screws, di
... Read moresconnect the wire harness, throw away the old, get new, connect the wire harness, connect hinges, put in two screws! Super easy. Watch the video for some pointers along the way.
Read less
Was this helpful?
Thank you for voting!
Evaporator fan making noise
11 of 19 peoplefound this instruction helpful.
Tom from COPPER HILL, VA
Really Easy
Less than 15 mins
Screw drivers
Turn off the power to the refrigerator. Remove the back plate. Unplug the fan motor. Remove the fan housing and pull the fan blade from the motor. Replace the motor by removing 4 screws. Replace with the new motor and reinstall the fan blades. Secure the fan housing, plug the fan motor, and screw on the back panel. Plug and go!