This rear drawer glide, also known as a storage drawer glide, is used in ranges. This helps hold the front side of the storage drawer and allows the drawer to easily slide in and out of the range. If your glide is damaged or missing, replacing it could solve any difficulty using the drawer. First, remove the storage drawer and locate the rear glide on the side. Next, remove the glide by taking out the screws. Replace new glide by placing tabs into the cut-out. If you are replacing both rear drawer glides, then repeat the same on the other side. Refer to the diagram provided by the manufacturer for further installation instructions and guidance.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Tappan.
Part# 316407402 replaces these:
AP6799824, 316407400, 316407401
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barry
October 18, 2019
Have just moved. Found the bottom pots and pan drawer to be not sliding in/out properly, found the 2 white pieces that would fix it to glide properly on floor behind the stove. How do i put them back in to make the drawer work properly.
For model number CFEF3048LSM
Good Day Barry. Thank you for your question in regards to your unit (Model Number CFEF3048LSM). Unfortunately we were not able to find answer to your question and would recommend reaching out to the manufacturer for further assistance. They can be reached at by phone by calling 800-374-4432. Best Regards.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jean
June 29, 2021
Range storage drawer -can't remove drawer to replace glides. When I lift and tilt it upwards, the rear glide does not release from sides of range. How can I get this drawer completely out so I can replace the glides? Thanks.
For model number FEFL68GMA
Hello Jean, Thank you for the question. We suggest pulling the appliance out and access the glides from the back to see if you can release the glides and remove the Drawer. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bonnie
October 24, 2022
Will this part work on the front of the drawer? That's what needs to be replaced
For model number LGGF3043KFT
Hello Bonnie, thank you for your question. No, the part you had chosen if meant for rear only. The Front Drawer Glide is part PS11770783. Good luck with this repair.
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout