This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Ice maker won’t dispense ice | Noisy | Won’t start
Ask our experts a question about this part and we'll get back to you as soon as possible!
116 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
November 8, 2018
Ice maker doesn’t make ice and is dry.No water at all.Plus one side of the rail that dumps the ice is up and the other one is down.The water dispenser still dispenses water for drinking at the door.I don’t here the ice maker even try to make ice.I can see that there is water in the tube at the top where it goes into the ice maker on the back side of the refrigerator.Do i have a two part problem ,ice maker and valve? Any help would be appreciated.Thank you.
For model number FFHS2322MSFA
Hello David, Thank you for the question. I suggest filling the ice maker with a glass of water. If the ice maker does not kick in and make ice, the ice maker will need to be replaced. Thank you for your inquiry, good luck with this repair!
104 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
May 3, 2019
Water dispenser works but no water to ice maker
For model number FFHS2611LBJ
Hello Bob, thank you for your question. We would recommend testing the water valve first to see if the port that feeds the icemaker has failed. Here is a link with instructions on testing the valve. https://www.partselect.com/Refrigerator+test-water-valve+repair.htm. If that part is fine, the icemaker would need to be replaced. I hope this helps.
37 people found this helpful.
Was this helpful?
Thank you for voting!
Synthia
November 14, 2018
My ice make will no longer dispense ice when i push the lever.
For model number js1-26
Hello Synthia, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. js1-26 is not coming up a valid number. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
15 people found this helpful.
Was this helpful?
Thank you for voting!
JAY NEWELL
December 10, 2018
My ice maker will not make ice. When i put the lever down it does not even attempt to move up. There is no water or ice in the tray. Do i need to replace the entire ice maker? Thanks!
For model number FGUS2642LF2
Hi Jay,
Thank you for your question. If your ice maker is not making ice, There are some parts that you will need to check to see which ones are causing the issue. You will need to check the water fill tubes, the water inlet valve, the water filter and the ice maker. I hope this helps. Thank you and have a great day!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Donnie
December 20, 2018
The ice maker leaks and causing ice cycles to form inside the ice bin. It also makes loud clicking sounds during the harvesting cycle. Don't need a water control valve or an ice maker assembly.
For model number FFHS2311PF6A
Hi Donnie,
Thank you for your question. If the ice maker is leaking the issue may be the water inlet valve and you will need to check to see if it is working correctly. You can check the valve with a multimeter. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
John
February 14, 2019
Are there any better or updated icemakers for this model as this will be the 3rd one including one the original and the fridge is only one and a half years old? I am really disappointed in this unit.
For model number ffhs2611lwma
Hello John, Thank you for your question. I am very sorry to hear that you have had continuous trouble with the ice maker. I understand that could be very frustrating. Upon reviewing the model number provided, I show the ice maker listed is PS12364147 and this is the only one listed. The part number cross reference indicates the ice maker has been replaced numerous time so you should see an improvement. We also offer a one year warranty on all of our parts. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Fleet
August 13, 2019
Does the ice maker kit include the motor that drives the dispensing screw?
For model number FFSS2314QS9A
Hello Fleet, thank you for your question. The Auger Motor is sold separate from the replacement Ice Maker for your model. It is part number PS10057235. Good luck with your repair!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Janet
June 3, 2019
How long is the warranty on the ice maker? I replaced it less than 2 years ago, it was making a weird knocking noise every so often, and now it's just quit. I don't want to be replacing it every couple years.
For model number FRS3HR5HW2
Hi Janet,
Thank you for your question. All of our parts come with a one year warranty. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Eric
November 20, 2018
Will this ice maker work with this refrigerator model number
For model number FFHS2322MS9
Hello Eric, thank you for your question. Yes, this icemaker is a compatible replacement for your specific model. Good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
April 22, 2019
I need the ice storage drawer with augger it was replaced after a short time it was worked on jan 22 ,2019 now pieces of storage drawer is breakin off an getting in ice they tell me ice drawers are not covered i would love to have a new ice bin with the augger i will pay for it. But i have had problem with this every sence i bought it thank you
For model number FFSS2615TS0
Hello Robert, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1991430. Hope this helps!
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 26 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The water valve for the ice maker was bad
Pulled the refrigerator out from the wall. Then unplugged it took my nutdriver with a1/4" socket on it and took out the screws from the cardboard back on the bottom of the refrigerator. Then I removed the two screws holding the water valve on. Then I unscrewed the supply water line from the main water inlet valve. Then I removed the outlet waterline going to the ice maker from the water valve. Then I reversed the procedure to put it back together. Hooked up the main water line and turned the water valve on for the water to flow to the valve at first nothing happened had to wait for a couple of hours for everything else to get to the right temperature before the ice maker would start making ice.
Turn off ice maker Slide wire harness shield off connector Disconnected harness Loosened 2 wall screws Remove old ice maker Installed new one reversing process
John from PHOENIX, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing Icemaker
Pull refrigerator from wall and disconnect the water line and unplug the power.
On top of the icemaker, two machine screws hold the icemaker to the side of the refrigerator. You will have to feel around to find the machine screws, but once you do, it is simple to slip the appropriate size socket over the hex heads. I found it helpful to have an extension on the socket wrench. Disconnect the power cable inside the refrigerator (there are little pressure clips on the side that help release the cable) and move it out of the way for the time-being.
Back out both machine screws several turns, but do not remove them completely. The icemaker slips over the screws, so leaving them in the side of the refrigerator makes that process a lot easier. Hand tighten the machine screws once you have positioned the new icemaker in place. One thing to be sure and do is make sure the water line hose coming out of the back of the refrigerator inside is on top of the icemaker. It fits into a slot in the top of the icemaker - failing to do this will result in water pouring into the freezer compartment, not into the icemaker..
Reconnect the power cable to the new icemaker and tuck it up behind the icemaker assembly. Tighten the machine screws completely, but do not over-tighten.
Reconnect the water line on the back of the refrigerator at the wall, and plug in the refrigerator. You should hear the unit fill immediately.
In about an hour you should have ice filling the bin. Enjoy!
Richard Allen from PHOENIX, AZ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
made lots of noise
Loosen two screws, unplug power, lift it off, put new one on and make sure water chute is correct place, tighten screws!
Kelly from GILBERT, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped working. Part needed to repair it no longer available so had to replace the whole icemaker.
Loosened the two mounting screws (no need to remove them), lift off the icemaker and unplug it. Reverse the order and done.
Edward from GROTON, CT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My previous ice maker made a ton of noise and stopped making ice
It was as simple as removing two hex head screws to remove the old ice maker, then aligning the new ice maker (ensuring the downspout from the water supply was directed into the opening designated for it) and then screwing the two screws back into place. The most difficult part is the space that you have to work with. It was a little difficult and frustrating, but put in place, an hour later we had ice and it's worked great since!
Turn off power. Remove ice tray. Back out the two screws with nut driver and just lift ice maker off screws. Do not bend the water fill tube in the back . Now unplug the wire and remove ice maker . To replace, match the color of wires on plug. Adjust wires in place and water fill tube and back on to the screws. Hold in place and snug screws. Turn power back on. In 4 to 5 hours your ice will start . FED-EX UT to MN was 13 days to deliver .
Douglas from INVER GROVE, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped making ice.
The repair was fast and easy .I removed the ice tray , disconnected the wiring connector and lossend two screws. I removed ice maker assy.and repeated in reverse order to install. I also installed a new water filter. I had ice in about 20 minutes.
Thomas from WESTAMPTON, NJ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Every thing went smooth
But I have back ground mechanical skills, I did see the video one time, and everything went smooth......
Micu from MOJAVE, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker would dump ice one time and then stop. Turning the ice maker off for a minute and back on would repeat the process.
I removed the two side mount screws with a screwdriver and disconnected the electrical plug to the ice maker to remove it. I reversed the process to install the new one.
It was the thermostat that was the problem, but I chose to replace the entire ice maker for only $25 more.
James from KNOXVILLE, TN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
77 Reviews
4.9
Filter By Rating:
5 Stars
70
4 Stars
6
3 Stars
1
2 Stars
0
1 Star
0
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Theo P - 25 days ago
Verified Purchase
Great service!
Easy to use website, prices are good, quick delivery. I will continue to use them.
★★★★★
★★★★★
Brad T - April 21, 2023
Verified Purchase
Ice make change out
The part arrived quickly. There was not a way to check on shipping status. The install was fairly quick, no problems.
★★★★★
★★★★★
ARTHUR A - March 9, 2023
Verified Purchase
Replacement for ours that broke one month after purchasing our new refrigerator.
Only reason I am giving it a 4 star rating is because it’s too soon to tell. My husband installed it easily and it started making ice. So happy to have a working ice maker again.
★★★★★
★★★★★
Raymond B - December 8, 2022
Verified Purchase
ice maker
worked well
★★★★★
★★★★★
Salvador C - November 8, 2022
Verified Purchase
Ice maker
Customer service was very helpful in selecting the right part. Arrived quickly and fit perfectly. Works great very satisfied.
★★★★★
★★★★★
Robert T - October 17, 2022
Verified Purchase
Very easy to install ice maker, great customer service
The ice maker fit and was easy to install. PartSelect uses FedEx ground and it takes about a week to the East Coast with standard shipping. This was a replacement for one I previously bought from PartSelect and was guaranteed a year. The way the guarantee works is that I purchased a new ice maker at today's price and sent the broken one back to be credited for the original price I paid. FedEx lost it but Pierre at PartSelect credited my account anyway.
★★★★★
★★★★★
KEVIN B - October 4, 2022
Verified Purchase
easy repair
New icemaker only took 10 minutes to change. Took about 6 hours for it to start making ice but all is good now. I highly recommend this part if needed.
★★★★★
★★★★★
Steven J - April 14, 2022
Verified Purchase
Simple install and worked as needed
as always - the tutorial videos and help for trouble shooting are great for the DIY to save repair costs for simple to moderate repairs
★★★★★
★★★★★
Richard Allen G - November 28, 2021
Verified Purchase
Quick and Simple
The icemaker on my 10-year old refrigerator finally gave up the ghost. I looked on Part Select with the model number found on the inside of the refrigerator, and found that a replacement icemaker was available to fit the model of refrigerator I had. I ordered one, and in less than a week it arrived.
Two machine screws later, the old one was off. The new one fit perfectly - although I did have to take it off once to make sure the water line was tucked into the top of the icemaker. After reconnecting the power and the water line at the wall, off it went. It filled immediately, and shortly after that I had ice.
A couple weeks later, everything is still working perfectly. DIY is so satisfying, and costs a LOT less than having a service tech fix the exact same problem with a part ordered from Part Select.
★★★★★
★★★★★
Michael D - November 2, 2021
Verified Purchase
Works Great!
It works great! Before I installed it, I pried the front cover off with a flat tip screwdriver in the side slot., Adjusted the screw to make more ice, sooner (turn screw out). I use a lot of ice. Then replaced the cover (snaps on) I also removed the metal "L" shape piece from the old ice maker, and installed it on the new one, so that I could adjust it to make the ice maker level. Then I reconnected the wiring plug, reinstalled the two 1/4" screws (used a wrench with an extension), that holds the ice maker to the freezer, adjusted the "L" shape metal to make the ice tray level, and tightened the 1/4" screw. Lowered the metal rod (that you would raise, to stop making ice), and it's been making ice ever since. Thank You!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12364147
Manufacturer Part Number: 241798231
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
Same-day Shipping
Ships from USA
1 Year Warranty
365 Day Returns
