Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mark S - December 7, 2021
Verified Purchase
Replaced them BOTH
I thought if one was going to go then the other might not be far behind. Ordering was super simple and using online videos really helped. I decided to replace the hoses as well as everything was 11 years old. Local stores had me on a 2 week wait and these folks had them to me overnight (slight fee of course).
The valves I had were fine but the rubber gaskets failed so as with everything you have to buy the complete parts.
Works just fine and now when I go on a trip we will turn the water lines off. Hey who knows I fixed it and think it’s good to go but knock on wood ??
★★★★★
★★★★★
Carl M - September 5, 2021
Verified Purchase
great part worked as intended
part looked just like old one replaced it and workes just like new
★★★★★
★★★★★
Jim B - April 23, 2020
Verified Purchase
easy repair
correct part was delivered and was in perfect condition.
★★★★★
★★★★★
Keith T - July 10, 2018
Verified Purchase
Worked as it should, easy to install
Worked as it should, simple installation.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Adam
April 22, 2018
Washer leaked under hot valve intake and runs down back of second silver panel in back. It does not leak around where water comes into valve and hose area. Could it be intake valve needing replacement?
For model number WTW5640XW0
Hi Adam,
Thank you for your question. I would say probably yes. The only other thing I would suggest checking are the hoses that go from your valve into the dispenser drawer. Just to double check everything. I hope that helps. Good luck with your repair.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Joey
May 7, 2019
Water drips inside tub when washer is not in use.
For model number wtw5500xwo
Hi Joey,
Thank you for your question. If you have water dripping inside your washer when it is not is use, the issue would be one of the water inlet valves and one of them will need to be replaced. The part numbers listed under your model number for both the hot and cold water inlet valves are PS12348074 and PS12348073. You will need to check the valves to see which one is causing the issue. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
September 10, 2019
My washer has started leaking, apparently at the detergent fill valve. Is there a replacement set for all the solenoids, or is there a specific one that i can order? And/or, is there something else i can check before ordering parts?
For model number MVWX700XL1
Hi Dave, the solenoids are part of this part W11168740. Check to make sure the washer is level. That the fill hoses are attached tightly. Make sure that the fill hose flat washers are properly seated, Check all of the plumbing for leaks and that the washer is loaded properly.Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ken
January 18, 2019
Water drips inside drum when washer is not running gotta keep the hose valves close could this be the issue
Hello Ken, thank you for contacting us. In order for us to locate the correct parts and repair information we will require the model number of the appliance. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Mike
February 4, 2023
I’m looking for the screen that goes in the hot water valve inlet, the valve is good, I just need a new plastic screen that fits inside inlet of valve, is it available?
For model number MVWX655DW1
Hi Mike,
Thank you for your question. The part number listed under your model number for the hose washer kit is PS1803069. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
