Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael R - August 10, 2018
Verified Purchase
Easy repair
Save yourself the trouble: pull the D/W out and turn it on its side. Otherwise, the original oetiker clamps are a pain to remove! The part had a different electrical connector but otherwise was an identical match. I assume that connector matches SOMEBODY's D/W but the pump appears to fit many different D/W models. I cut the connectors off, spliced the pigtails together and voila, working dishwasher! It took me about 15 minutes overall (excluding removing standing water because of my failed old pump).
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The diswaher was not pumping out the dirty water
Once I got the dishwasher out of the cabinet, which required removing the top screws and then the lower face plate. I then removed the old pump by disconnecting the hoses, then removing the old pump by pulling it from the hanger wire. I then disconnected the wire harness. I then put the new pump in place in reverse order. The wire harn
... Read moreess connections were different, and the new harness that came with the new pump I was not sure how it may have went with this unit. So I hard wired it by sniping out the wire connector on both sides and wire nutting the connections. Once done I put the dishwasher back in place and tested. Worked like a charm.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerrion
September 22, 2022
Dishwasher not draining properly and leaking from the front at the bottom and standing water
For model number GDF510PGD2WW
Hello Jerrion, thank you for contacting us. We would recommend checking the following parts to fix your issue: Drain Pump Kit, part number PS16219695, Flood Switch, part number PS8690623, Gasket, part number PS11700870, and Latch Striker, part number PS8690622. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
Does the LG wd35x20553 pump drain kit function as a drain solenoid?
For model number GDF520PGDBB
Hello David, Thank you for the question. Yes, the Pump and Solenoid woudl be the same part. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Stephen
October 11, 2022
Will this wash pump fit this model
For model number GDP530PSD2SS
Hi Stephen,
Thank you for your question. Yes, this pump will fit your dishwasher. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
