Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jamie
October 8, 2021
I have a Kitchenaid KSEG700ESS2 stove and one eye (left three ring burner) runs on high no matter what setting it selected. Could the problem be a bad infinite switch? If it was bad, would all the eye do the same thing?
For model number KSEG700ESS2
Hi Jamie,
Thank you for your question. If you turn the burner on to a lower temperature and it goes to a higher temperature instead, then there is an issue with the switch that controls that burner and it will need to be replaced. The part number listed under your model number for the switch is PS12114485. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Scott
February 21, 2023
The three size burner on front left of the range only has the high setting on all three sizes. We can not get it to reduce the temperature. What do I need?
For model number WFE770H0FZ1
Hello Scott, thank you for reaching out. The issue seems to be with the Infinite Switch and you may need to replace it, the part number is PS12114485. It turns the surface element on and off and controls how much heat the element produces. If that does not help, we would recommend replacing the Triple Radiant Surface Element, part number PS11764923. We hope this solves your problem!
My front left burner, has 3 diameter cook settings, each adjust from low to high. No matter how the burner knob is set, it always runs on high heat. Is it the infinite switch that needs rel9aced? If so, what is the part number for my model. Also, what is the part number for the knob itself, I need to replace that also.
For model number KSEG700ESS2
Hello Curtis, thank you for contacting us. Based on our research, the infinite switch, part number PS12114485, and the knob, part number PS11765471, are compatible with your model. We hope this helps!
Is the same infinite switch used for all four burners even though some are two zone and some three zone?
For model number WFE745hofho
Hi Dave, Thank you for the question. Each burner has a different switch. The Left Front is listed as PartSelect Number PS12114485. The Left Rear is PartSelect Number PS11770037. Right Front is PartSelect Number PS11731368 and Right Rear PartSelect Number PS11769788. We hope this helps!
my front right dual burner only stays on high...what is the part for the switch to repair. Thanks for the help.
For model number YWFE745H0FH1
Hello Donnie, thank you for reaching out. According to our research, the switch that controls the right front dual element is PS11731368. If you need help placing an order, customer service is open 7 days a week!
Hello,
My kitchen aid infinite switch stop working, so is it right part. Like my right side's left controler's infinite switch is not working.
For model number Ykseg700ess3
Hello Harman, thank you for reaching out. This infinite switch controls the left front burner. The surface element switch associated with the left knob on the right side is part number PS11770037. We hope this information helps!
The front left burner only works on high, no matter what we set it to.
Both the inner and outer element both do the same thing.
For model number MER8800FZ1
Hello Chad, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the infinite switch, part number PS11731368, to solve the problem. Glad to be of help!
My whirlpool range has an issue where the stove top burner in the front left which is a triple burner only heats on high regardless of where I set the temperature for all 3 size heat settings. Wondering what part would be needed? Infinite switch or just burner switch itself? Thanks
For model number YWFE745H0FH0
Hello Garnet, thank you for reaching out. Based on our understanding of the issue, we would suggest replacing the infinite switch, part number PS12114485, to solve the problem. It turns the surface element on and off and controls how much heat the element produces. We hope that helps!
Was this helpful?
Thank you for voting!
Walter
August 9, 2023
My Left front burner will light initially but won’t stay lit and doesn’t bring water to a boil. I’ve already replaced the element but symptom persists. Will the infinite switch fix this?
For model number WGE745C0FS01
Hi Walter, thank you for asking. We would recommend replacing the dual surface element switch, part number PS11752578, to fix the issue. It turns the surface element on and off and controls how much heat the element produces. We hope this solves your problem!
My right front dual burner gets stuck on high. I see quite a few people with the same issue. I just want to make sure to order the correct switch for my stove. Please advise.
thanks
For model number WFE745H0FS1
Hello Stan, thank you for reaching out. The correct switch for the right front burner is part number PS11731368. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
