Burner Switch W10857622

Hello Joe, thank you for inquiring. Yes, this Infinite Switch part number PS11731368 is the corresponding part for the Dual Surface Element, part number PS11751137 for your model cooktop. Good luck with your repair!

Hello Don, Thank you for the question. The Switch that controls the Left and Right Front elements is the PartSelect Number PS11731368. We hope this helps!

Hello Ted, Thank you for your inquiry. We have researched your model and we recommend checking the element, the burner switch and the wiring. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. There could be multiple reasons why you are having this issue. Good luck with your repair.

Hello Jim, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11731368. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Patricia, thank you for reaching out. The problem seems to be with the Burner Switch and you may need to replace it, the part number is PS11731368. This switch controls the left and right front elements. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.

Hello Frank, thank you for getting in touch. Based on the description that you have provided, we would recommend that you check the following parts for continuity: the control board, part number PS12070680, the burner switch, part number PS11731368, the right rear burner switch, part number PS11769788, and the surface element switch, part number PS11770037. The switches can be replaced depending on the particular burner that is not working, as each of these switches controls a specific dual element. If the switches and the control board are working fine, you may need to replace that particular element. We hope this information helps!

Hello Jim, thank you for your question. Yes, the Switch PS11731368 you had chosen is compatible with your model. Please feel free to give us a call. We look forward to hearing from you.

Hello Nolan, thank you for reaching out. Yes, the part you have mentioned is for the right front burner and fits your model. We hope this helps!

Hello Lawrence, thank you for contacting us. The issue can be caused by a faulty burner switch as it controls the heat to the element. You may need to replace the burner switch, part number PS11731368, to resolve your issue. We hope this helps.

Hi Linda, Thank you for your question. If the front-left burner does not respond when you try to adjust the temperature, the switch controlling it may be malfunctioning and it will need to be replaced. Before inspecting the switch, unplug the range from the electrical outlet. Inspect the wires near the switch for any signs of burning, or overheated wires, and terminals. If no issues are found, remove the switch in order to test it for continuity. Using a multimeter on the Rx1 mode, test for continuity by touching the L1 and H1 terminals with the probes. Once you have completed that test, touch the probes to the L2 & H2 terminals. If your test results indicate that there is no continuity between one or both sets of terminals, you need a replacement infinite switch. The part number for the left front burner switch is PS11731368. We hope this helps!