Frigidaire/Frigidaire_Thumb/NCJ6492M.gif
See part F19 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Oven Burner Igniter

★★★★★
★★★★★
24 Reviews

Rated by 8 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 116.20   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 79060012604!
 Fits your 79060012604!
PartSelect Number PS12071409
Manufacturer Part Number 5304509706
Manufactured by Frigidaire
Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light | Little to no heat when baking | Will Not Start
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Tappan.
Part# 5304509706 replaces these:
AP6230715, 316119301, 316489402, 316489408
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

25 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vonda
November 26, 2017
Are you sure this igniter will work with my oven. I cannot see a clear picture of it to make sure. If i would get it and it isn't the same is it returnable. My igniter has 2 wires coming out of base then separates to 2 plugins . 2 black ones middle way down and 1 white one at end.
For model number FFGF3012TWA
Hi Vonda, Thank you for your inquiry. Where this igniter is coming up under your model number it would be the correct part for your appliance. I have confirmed that the part does have 2 wires coming out of base then separates to 2 plugins . 2 black ones middle way down and 1 white one at end. If for some reason this is the wrong part we have a 30 day return period. Parts must be in resalable condition to qualify. All electrical parts must not have been installed. Returned items that have been installed will not be returned to customer. Customer is responsible for shipping returned parts back to PartSelect. (In this situation, if I mis-informed you regarding this part, we would provided you a prepaid label to return the part.) Any item received after 60 days of shipment date will not be refunded. I hope this helps. Thank you and have a great day!

12 people found this helpful.

Was this helpful?
Thank you for voting!
Darrell
July 30, 2018
Oven not getting hot
For model number fg348kmb
Hi Darrell, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If this is not the issue, then you will need to check the oven burner igniter, the electronic control board and the touchpad. I hope this helps. Thank you and have a great day!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Kareemah
November 20, 2018
My oven does not come on.. i turn on to 350 nothing, the gas is working because the burners are working fine.
For model number 79073433310
Hi Kareemah, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If the sensor is working fine, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the oven burner igniter, the spark module, the oven light socket and the safety valve. I hope this helps. Thank you and have a great day!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Donnette
October 30, 2019
Pilot light ignite but the oven doesn't get hot. Thank you
For model number FFGF3047LSH
Hello Donnette, Thank you for the question. The igniter can glow and not give off enough current to open the valve and allow it to release gas to light. You can use a Multi Meter to test for 3.2-3.6 volts AC at the gas safety valve with the igniter turned on. Thank you for your inquiry, good luck with this repair!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Maria
August 1, 2019
What is the part number for the oven igniter
For model number ffgf3047lsg
Hello Maria, thank you for your question. This Oven Burner Igniter part number PS12071409 is the correct replacement for your model. Good luck with your repair!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Joe
May 13, 2019
Oven works but broiler doesn't, are there two ignitors? One for the oven and one for the broiler?
For model number 790.74333314 kenmore
Hello Joe, thank you for inquiring. For your model the Broiler Igniter is part PS11770500 and the Bake Igniter is part PS2364063.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Mary
7 days ago
Will this igniter fit into my model?
For model number 790.70402012
Hello Mary, thank you for your question. Yes, the Igniter PS12071409 you had chosen is compatible with your model. We are pleased to have been able to help.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Robin
December 7, 2021
Is this the correct igniter for my model number #79073432314?
For model number 79073432314
Hello Robin, thank you for your question. Yes, the PartSelect Number PS12071409 you had chosen is compatible. We hope to hear from you soon.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Charles
November 2, 2022
Hi. The igniter on the above model oven tests at 2.4 volts AC. You specify voltage needs to be between 3.2 - 3.6. Is that also correct for my model no.? I.e. are you referring to an igniter that your part no. PS12071409 replaces?
For model number FGF319KSA
Hello Charles, thank you for contacting us. Yes, the igniter, part number PS12071409, is compatible with your model, and for efficient igniting its voltage reading must be between 3.2 - 3.6 volts. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Raymond
November 3, 2021
What amperage may I expect in diagnostics on the oven ignitor to be working properly?
For model number FFGF3011LWJ
Hi Raymond, Thank you for your question. The amperage for this ignitor should be between 3.2 to 3.6 amps. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 8 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Long time before oven would light / propane smell
Unplug range, remove oven racks, remove 2 screws at the rear of oven bottom sheet metal panel. Lift the back of the panel and slide to the rear a little , then remove panel. Remove nut on top of heat shield and remove shield.. Open broiler draw slightly Note wire connections to gas valve. Remove Philips head screw from sheet metal guard bottom left rear to access wire connection. remove 2 hex head screws the hold igniter in place and install new igniter. remove spade connectors from gas valve and connect spade connectors from new igniter. , remove molex connector from bottom left rear and connect one from new igniter..Install shield in left rear bottom. install heat shield over burner and install nut. Install sheet metal panel in bottom of oven and 2 rear screws.. install oven racks and plug range back in. set clock and test your repair.
  • Thomas from CAMPTON, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
20 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat
Unplug the range, remove racks. Remove 2 screws from the bottom back corners ( this was the hardest part. I used a stubby screwdriver, but a longer one would be better. They are fairly long screws). Remove oven bottom, lifting from the rear. Remove burner cover. Bottom left corner is a triangle cover. Remove this too. Remove the 2 screws holding the old igniter in place. The igniter unplugs easily. ( I used pliers, the plug has a clip, and pliers grip better.) Install new igniter ( it only fits in one way ) reinstall mounting screws and covers. Replace oven bottom. (I didn't replace the 2 screws. The bottom sits solidly, and they are a bit of a pain.) Plug in, set clock, test for oven to fire up.
  • Aaron from MILLPORT, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stovetop worked fine, but Oven didn't always light.
Open oven door and remove metal splash plate on bottom of oven by removing two screws in back.
Remove heat distribution plate (metal) by unscrewing a single nut with pliers.
Now the ignitor is visible. Unscrew old ignitor by backing off two screws.
Detach the wires and reattach to new ignitor. (a cover plate may have to unbolt from the left back corner to get at one of the wiring connections.)
Reattach new ignitor and then flame distribution plate.
Put on splash cover and tighten back screws.
Test oven, it should light within 1 minute.
All is done.
  • John from PLACERVILLE, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter wouldn't glow and obviously no heat
Partselect always have their install video with the parts they sell so it was easy. I know contractors must not be happy with people like partselect and YouTube with all the instructional videos they supply us with. Keep up the great work partselect.
  • David from JERSEY CITY, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Low amperage to gas safety valve no gas flow.
Disassembled inside of oven. Slid away from wall opened back replaced safety valve and igniter. Safety valve was good changed only because it was apart. Resemble and test sat. Kept old safety valve for emergency spare.
  • RONALD from VIRGINIA BCH, VA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven wouldn't light consistently
remove oven floor and racks remove two self tapping screws unplug igniter replace be careful not to touch element plug in reverse order to reassemble
  • BRADLEY from SHERIDAN, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter gets hot but wouldn't ignite
I did the repair with the instructions from parts select
It was very self explationatry
Thank you parts select
I saved at least $400.
  • Vajai from RICHMOND HILL, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old igniter no longer worked properly, so I needed to install a new one.
1. Unplug the range to ensure there is no electricity running through the range. The repair can be done with the propane/gas line still connected.

2. If possible, remove the storage drawer for ease of access.

3. Remove the screw from the metal plate in the left corner of the oven. Detach the end of the igniter cord that you find plugged in there.

4. Remove the two screws that hold the igniter in place. The old igniter should fall to the bottom of the range.

5. Take a picture of the two other cord connections that run into the middle of the back wall. This will come in handy for reference when you install the new igniter.

6. Route the longer extension of the new igniter cord through the hole in the metal corner plate, attach the cord, and put the screw back in to secure the corner plate.

7. Affix the new igniter to the same spot the old one had been in, using the two screws from step 4.

8. Plug in the two shorter cord extensions, using the photo from step 5 if necessary.

9. Reattach the drawer if necessary and plug the range back in.

10. Set the clock, then set the oven to a desired temperature to begin heating. If the repair was successful, the igniter will light the gas piped into the range, and you will see a ring of flame.
  • Andrew from BANGOR, ME
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
24 Reviews
4.5
Filter By Rating:
  • 5 Stars
    19
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12071409
Manufacturer Part Number: 5304509706
Brand
Model Number
Description
Kenmore
79060012604
Range
Kenmore
79060712900
Range
Kenmore
79060712902
Range
Kenmore
79060720900
Range
Kenmore
79060720901
Range
Kenmore
79060721902
Range
Kenmore
79060721903
Range - GAS RANGE
Kenmore
79060721904
Range - GAS RANGE
Kenmore
79060721905
Range - GAS RANGE
Kenmore
79060721906
Range - GAS RANGE
Kenmore
79070112700
Range
Kenmore
79070112702
Range
Kenmore
79070112705
Range
Frigidaire
79070113701
Range
Kenmore
79070113705
Range
Kenmore
79070114700
Range
Kenmore
79070114701
Range
Kenmore
79070119705
Range
Kenmore
79070119706
Range
Kenmore
79070119707
Range
Kenmore
79070270404
Range
Kenmore
79070270405
Range
Kenmore
79070270407
Range
Kenmore
79070271404
Range
Kenmore
79070271405
Range
Kenmore
79070271406
Range
Kenmore
79070281405
Range
Kenmore
79070281406
Range
Kenmore
79070281407
Range
Kenmore
79070292404
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service