Models > 79060012604

79060012604 Kenmore Range - Overview

Sections of the 79060012604

[Viewing 5 of 5]

Manuals & Care Guides for 79060012604

Click to download
Keep searches simple, eg. "belt" or "pump".
RACK – Part Number: 5304526378
RACK
PartSelect #: PS16731275
Manufacturer #: 5304526378
Oven racks can become rusted or damaged from constant use, and need to be properly maintained and cleaned to keep them working properly. If you notice that your oven rack has been damaged or rusted, t...
$33.17
  In Stock
Oven Burner Igniter – Part Number: 5304509706
Oven Burner Igniter
★★★★★
★★★★★
(23)
PartSelect #: PS12071409
Manufacturer #: 5304509706
$116.20
  In Stock
Oven Thermostat - 125V 60Hz – Part Number: 316032411
Oven Thermostat - 125V 60Hz
★★★★★
★★★★★
(1)
PartSelect #: PS2339203
Manufacturer #: 316032411
This part establishes and maintains the internal temperature of the oven cavity.
$119.51
  In Stock
Anti-Tip Kit – Part Number: 316112005
Anti-Tip Kit
★★★★★
★★★★★
(4)
PartSelect #: PS3655242
Manufacturer #: 316112005
The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, or stove from tippin...
$25.00
  In Stock
Touch Up Paint - White – Part Number: 5303321319
Touch Up Paint - White
PartSelect #: PS467298
Manufacturer #: 5303321319
This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear. It is an 18ml bottl...
$17.55
  In Stock
Thermostat Knob – Part Number: 316102303
Thermostat Knob
★★★★★
★★★★★
(3)
PartSelect #: PS438745
Manufacturer #: 316102303
$45.29
  In Stock
Steel Washer – Part Number: 316008401
Steel Washer
PartSelect #: PS436497
Manufacturer #: 316008401
This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter inch inner diameter....
$17.42
  In Stock
LEVELING LEG ASSY – Part Number: 5304509869
LEVELING LEG ASSY
★★★★★
★★★★★
(3)
PartSelect #: PS12364627
Manufacturer #: 5304509869
Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.
$5.07
  In Stock
Safety Valve – Part Number: 3203459
Safety Valve
★★★★★
★★★★★
(2)
PartSelect #: PS446204
Manufacturer #: 3203459
This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.
$350.16
  In Stock
Oven Door Seal with Clips – Part Number: 316239700
Oven Door Seal with Clips
★★★★★
★★★★★
(3)
PartSelect #: PS440011
Manufacturer #: 316239700
Also known as gasket.
$111.81
  In Stock
SCREW – Part Number: 316021109
SCREW
PartSelect #: PS436929
Manufacturer #: 316021109
Sold Individually.
$11.61
  In Stock
Leveling Leg – Part Number: 316272900
Leveling Leg
PartSelect #: PS977569
Manufacturer #: 316272900
This part is sold individually. The leveling leg is black in color and measures approximately 2 inches in length. It is made of plastic. The leveling leg is found underneath your range and may crack o...
$16.57
  In Stock

Questions And Answers for 79060012604

Be the first to ask our experts a question about this model!

Common Symptoms of the 79060012604

[Viewing 6 of 6]
Gas igniter glows, but will not light
Fixed by
these parts
Show All
Little to no heat when baking
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Element will not heat
Fixed by
these parts
Show All
Oven is too hot
Fixed by
these parts
Show All
Oven not heating evenly
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Safety valve would not open
I am an HVAC tech by trade so it wasn't difficult to diagnose problem with safety valve. The hard part was being without an oven for a week. Repair was simple and effective--oven works good as new.
Shut off gas and unplugged oven. Removed floor of oven between broiler and bake section, used wrenches to disconnect gas line from safety valve in back of oven, used philipps head screwdriver to remove burner assembly and gas valve, reversed process to replace. Checked out operation--OK.
Parts Used:
Safety Valve
  • Ed from Darby, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
120 of 148 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
anti-tip bracket not installed
I was selling my home and did not realize that the anti-tip bracket was not originally installed. A home inspection caught the problem and the buyers required that I install one. I could not find the original and obviously the installer never put it in place to begin with. The buyers wanted this resolved within a week so I had to act fast. I could not find one locally so I found what I needed on your website. It arrived in a couple of days and was easy to install. I used the template provided in the kit and drove the screws through the bracket into the wood plate behind the drywall. Pushed the range back in place and that's it. Couldn't get any easier.
Parts Used:
Anti-Tip Kit
  • Brian from Panama City Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
33 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Long time before oven would light / propane smell
Unplug range, remove oven racks, remove 2 screws at the rear of oven bottom sheet metal panel. Lift the back of the panel and slide to the rear a little , then remove panel. Remove nut on top of heat shield and remove shield.. Open broiler draw slightly Note wire connections to gas valve. Remove Philips head screw from sheet metal guard bottom left rear to access wire connection. remove 2 hex head screws the hold igniter in place and install new igniter. remove spade connectors from gas valve and connect spade connectors from new igniter. , remove molex connector from bottom left rear and connect one from new igniter..Install shield in left rear bottom. install heat shield over burner and install nut. Install sheet metal panel in bottom of oven and 2 rear screws.. install oven racks and plug range back in. set clock and test your repair.
Parts Used:
Oven Burner Igniter
  • Thomas from CAMPTON, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
20 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!