Frigidaire/Frigidaire_Thumb/NCJ6492M.gif
See part F19 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Oven Burner Igniter

★★★★★
★★★★★
23 Reviews
$82.36   Special Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12071409
Manufacturer Part Number 5304509706
Manufactured by Frigidaire
Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light | Little to no heat when baking | Will Not Start
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Tappan.
Part# 5304509706 replaces these:
AP6230715, 316119301, 316489402, 316489408
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

17 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vonda
November 26, 2017
Are you sure this igniter will work with my oven. I cannot see a clear picture of it to make sure. If i would get it and it isn't the same is it returnable. My igniter has 2 wires coming out of base then separates to 2 plugins . 2 black ones middle way down and 1 white one at end.
For model number FFGF3012TWA
Hi Vonda, Thank you for your inquiry. Where this igniter is coming up under your model number it would be the correct part for your appliance. I have confirmed that the part does have 2 wires coming out of base then separates to 2 plugins . 2 black ones middle way down and 1 white one at end. If for some reason this is the wrong part we have a 30 day return period. Parts must be in resalable condition to qualify. All electrical parts must not have been installed. Returned items that have been installed will not be returned to customer. Customer is responsible for shipping returned parts back to PartSelect. (In this situation, if I mis-informed you regarding this part, we would provided you a prepaid label to return the part.) Any item received after 60 days of shipment date will not be refunded. I hope this helps. Thank you and have a great day!

11 people found this helpful.

Was this helpful?
Thank you for voting!
Darrell
July 30, 2018
Oven not getting hot
For model number fg348kmb
Hi Darrell, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If this is not the issue, then you will need to check the oven burner igniter, the electronic control board and the touchpad. I hope this helps. Thank you and have a great day!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Maria
August 1, 2019
What is the part number for the oven igniter
For model number ffgf3047lsg
Hello Maria, thank you for your question. This Oven Burner Igniter part number PS12071409 is the correct replacement for your model. Good luck with your repair!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Joe
May 13, 2019
Oven works but broiler doesn't, are there two ignitors? One for the oven and one for the broiler?
For model number 790.74333314 kenmore
Hello Joe, thank you for inquiring. For your model the Broiler Igniter is part PS11770500 and the Bake Igniter is part PS2364063.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Kareemah
November 20, 2018
My oven does not come on.. i turn on to 350 nothing, the gas is working because the burners are working fine.
For model number 79073433310
Hi Kareemah, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If the sensor is working fine, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the oven burner igniter, the spark module, the oven light socket and the safety valve. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Donnette
October 30, 2019
Pilot light ignite but the oven doesn't get hot. Thank you
For model number FFGF3047LSH
Hello Donnette, Thank you for the question. The igniter can glow and not give off enough current to open the valve and allow it to release gas to light. You can use a Multi Meter to test for 3.2-3.6 volts AC at the gas safety valve with the igniter turned on. Thank you for your inquiry, good luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Laura
November 5, 2019
I have a Kenmore gas range that had an ignition switch with 3 wires and a flat coil. Can it be replaced with a round coil
Hi Laura, Thank you for your question. You should only use the igniter that has been manufactured for your range. To verify the correct igniter for your range, please provide us with your model number and we would be happy to verify the correct part for you. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Larry
November 17, 2019
Hello: My fridgedaire gas range oven will not maintain the oven heat setting. Oven will preheat to set temperature and then will slowly loose heat after a few minutes. I purchased a temp probe sensor from you and replaced the old one and the oven worked fine for several weeks and now presents the same issue. Is it likely that the new probe has also gone bad, or is there another possible problem? Thanks larry
For model number FFGF3017LWH
Hello Larry and thanks for writing. It could also indicate an oven burner ignitor # PS12071409 problem. You want to clean that first and if it does not solve the issue consider replacing it.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Yvon
November 25, 2019
Is this part compatible with my oven burner ignitor? Please provide me with a list of compatibles.Thanks in advance
For model number LFGF3014LBC
Hello Yvon, thank you for your question. Yes, this is a compatible replacement igniter for your specific model. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Sandra
November 28, 2019
Takes my oven three hours to heat to 345 degrees, i have replaced the temp sensor and it didn’t fix the problem. Igniter is glowing, over burner comes on, it’s has a nice blue Flame but yet it takes the oven 3 hours to heat to 345 degree. What do i replace next?
For model number 790.70409012
Hello Sandra, thank you for your question. We would recommend replacing the igniters first, and if that doesn't fix the issue, the electronic control board should be replaced which is PartSelect Number PS1528270. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 5 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Long time before oven would light / propane smell
    Unplug range, remove oven racks, remove 2 screws at the rear of oven bottom sheet metal panel. Lift the back of the panel and slide to the rear a little , then remove panel. Remove nut on top of heat shield and remove shield.. Open broiler draw slightly Note wire connections to gas valve. Remove Philips head screw from sheet metal guard bottom left rear to access wire connection. remove 2 hex head screws the hold igniter in place and install new igniter. remove spade connectors from gas valve and connect spade connectors from new igniter. , remove molex connector from bottom left rear and connect one from new igniter..Install shield in left rear bottom. install heat shield over burner and install nut. Install sheet metal panel in bottom of oven and 2 rear screws.. install oven racks and plug range back in. set clock and test your repair.
    • Thomas from CAMPTON, NH
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Screw drivers
    • Parts Used:
      5304509706
    19 of 20 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Oven would not heat
    Unplug the range, remove racks. Remove 2 screws from the bottom back corners ( this was the hardest part. I used a stubby screwdriver, but a longer one would be better. They are fairly long screws). Remove oven bottom, lifting from the rear. Remove burner cover. Bottom left corner is a triangle cover. Remove this too. Remove the 2 screws holding the old igniter in place. The igniter unplugs easily. ( I used pliers, the plug has a clip, and pliers grip better.) Install new igniter ( it only fits in one way ) reinstall mounting screws and covers. Replace oven bottom. (I didn't replace the 2 screws. The bottom sits solidly, and they are a bit of a pain.) Plug in, set clock, test for oven to fire up.
    • Aaron from MILLPORT, NY
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers, Wrench (Adjustable)
    • Parts Used:
      5304509706
    3 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Stovetop worked fine, but Oven didn't always light.
    Open oven door and remove metal splash plate on bottom of oven by removing two screws in back.
    Remove heat distribution plate (metal) by unscrewing a single nut with pliers.
    Now the ignitor is visible. Unscrew old ignitor by backing off two screws.
    Detach the wires and reattach to new ignitor. (a cover plate may have to unbolt from the left back corner to get at one of the wiring connections.)
    Reattach new ignitor and then flame distribution plate.
    Put on splash cover and tighten back screws.
    Test oven, it should light within 1 minute.
    All is done.
    • John from PLACERVILLE, CA
    • Difficulty Level:
      Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
    • Parts Used:
      5304509706
    3 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Igniter wouldn't glow and obviously no heat
    Partselect always have their install video with the parts they sell so it was easy. I know contractors must not be happy with people like partselect and YouTube with all the instructional videos they supply us with. Keep up the great work partselect.
    • David from JERSEY CITY, NJ
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Nutdriver, Screw drivers
    • Parts Used:
      5304509706
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    oven wouldn't light consistently
    remove oven floor and racks remove two self tapping screws unplug igniter replace be careful not to touch element plug in reverse order to reassemble
    • BRADLEY from SHERIDAN, MI
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver, Screw drivers
    • Parts Used:
      5304509706
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      23 Reviews
      4.5
      Filter By Rating:
      • 5 Stars
        19
      • 4 Stars
        1
      • 3 Stars
        0
      • 2 Stars
        1
      • 1 Star
        2
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS12071409
      Manufacturer Part Number: 5304509706
      Brand
      Model Number
      Description
      Kenmore
      79060012604
      Range
      Kenmore
      79060712900
      Range
      Kenmore
      79060712902
      Range
      Kenmore
      79060720900
      Range
      Kenmore
      79060720901
      Range
      Kenmore
      79060721902
      Range
      Kenmore
      79060721903
      Range - GAS RANGE
      Kenmore
      79060721904
      Range - GAS RANGE
      Kenmore
      79060721905
      Range - GAS RANGE
      Kenmore
      79060721906
      Range - GAS RANGE
      Kenmore
      79070112700
      Range
      Kenmore
      79070112702
      Range
      Kenmore
      79070112705
      Range
      Frigidaire
      79070113701
      Range
      Kenmore
      79070113705
      Range
      Kenmore
      79070114700
      Range
      Kenmore
      79070114701
      Range
      Kenmore
      79070119705
      Range
      Kenmore
      79070119706
      Range
      Kenmore
      79070119707
      Range
      Kenmore
      79070270404
      Range
      Kenmore
      79070270405
      Range
      Kenmore
      79070270407
      Range
      Kenmore
      79070271404
      Range
      Kenmore
      79070271405
      Range
      Kenmore
      79070271406
      Range
      Kenmore
      79070281405
      Range
      Kenmore
      79070281406
      Range
      Kenmore
      79070281407
      Range
      Kenmore
      79070292404
      Range

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service