Quick Question!

Have you ever purchased from PartSelect.com before?

11770643-1-S-Frigidaire-5304507199-Door Gasket
11770643-1-S-Frigidaire-5304507199-Door Gasket 11770643-2-S-Frigidaire-5304507199-Door Gasket 11770643-3-S-Frigidaire-5304507199-Door Gasket https://partselectcom.azureedge.net/Schematics/Frigidaire/TDDEF1UL.gif

Door Gasket

Your Price

$97.17
Order within the next 1 hr and 18 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11770643
Manufacturer Part Number 5304507199
Manufactured by Frigidaire

This gasket is used to seal the freezer door when closed to keep the cool air inside and the warm temperature surrounding the freezer from getting in. It is white in color. If you notice that your freezer is not shutting with ease, is not maintaining your desired temperature, or there is frost build up, it could be due to the door gasket being damaged. You might also notice that there is a leak coming from the door and this could also be caused by the gasket being worn, damaged, or no longer aligned properly. You will need to remove the existing screws before installing the gasket.

This part works with the following brands: Frigidaire, Kenmore, Gibson, Electrolux, Crosley, Uni.

This part works with the following products: Freezer.

This part fixes the following symptoms:

  • Frost buildup.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

My freezer sweats really bad on front of door causing water to leak onto floor. Is that from a faulty gasket?

Carolyn for model number AFFU2066DW3
Answer:

Hi Carolyn, Thank you for the question. Yes when the door is sweating it is recommend that you replace the gasket. Good luck with the repair!

3 people found this helpful.

Most Recent

Question:

Does this seal have a magnet in it??

Jenny for model number F82U20F3W0
Answer:

Hi Jenny, Thank you for your inquiry. Most gaskets have a magnetic strip so that the gasket can magnet to the appliance when the door is closed, however this is not how the gasket will install. This particular gasket is sandwiched between the door panels. You don't have to take the door apart, just unscrew the panels enough so that you can push the gasket into place. Good luck with your repair.

2 people found this helpful.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

7 of 7 people found this instruction helpful

Parts Used:
  • Door Gasket
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Thomas from RIXEYVILLE, VA

Gasket old and leaking

This freezer has many screws that hold the cover on the back of the door and assist clamping the edge of the gasket in place. Be sure to just loosen the screws 3/4 the way out, use a flat head screw driver to pry the cover from the door in case over time it is stuck to the door. The new gasket will come in a creative box trying not to kink the gasket itself, but there will be some distortion of the gasket when you get it. Put it in the sun or in hot water. I put it in my dryer for 10 minutes. Remove the old gasket, and start at the top of the door to replace the gasket. TIPS: If the screws are backed out enough, there should not be any problem sliding the back part of the gasket under the cover. When on the sides, do not pull the gasket down to make it easier to slide the gasket underneath the cover. This will distort and lengthen the gasket so it will not fit and thin it out so it will not function well. Once the gasket is in place, tighten the screws being sure to feel along the outside edge of the gasket for any bulging that would indicate that portion of the gasket is NOT under the cover properly.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Door Gasket
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Richard from CARY, NC

Freezer is 17 yrs old so needed a new gasket. The results were poor since the new gasket would not allow the door to seal.

Removed the numerous screws and took the door panel off. Cleaned and dried it. Replaced the insulation and hung the penal with 2 screws at the top and sides. Started to fit the gasket under the edge of the panel and put on the screws as I went across the top then down the sides finishing across the bottom. Perfect fit but could not get the door to seal at all. Went out and bought a new freezer(did I say it was 17 yrs old?!?!).

Help other customers find the most helpful instructions.

Were these instructions helpful?   

57 of 184 people found this instruction helpful

Parts Used:
  • Door Gasket
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Marion from Jamestown, NY

Freezer not cold

took door of removed gasket replaced

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11770643
Manufacturer Part Number: 5304507199
Brand Model Number Description
Kenmore25321021100Freezer
Kenmore25321021101Freezer
Kenmore25321021102Freezer
Kenmore25321021103Freezer
Kenmore25321021104Freezer - UPRIGHT FREEZER
Kenmore25321021105Freezer
Kenmore25321041100Freezer
Kenmore25321041101Freezer
Kenmore25321041102Freezer
Kenmore25321041103Freezer
Kenmore25321041104Freezer
Kenmore25321041105Freezer
Kenmore25321041107Freezer
Kenmore25321041108Freezer
Kenmore25321082100Freezer
Kenmore25321082101Freezer
Kenmore25321082102Freezer
Kenmore25321082103Freezer
Kenmore25321082104Freezer
Kenmore25321082106Freezer
Kenmore25321082107Freezer
Kenmore25321111100Freezer
Kenmore25321111101Freezer
Kenmore25321111102Freezer
Kenmore25321111103Freezer
Kenmore25323024100Freezer
Kenmore25323024101Freezer
Kenmore25323024102Freezer
Kenmore25323024103Freezer
Kenmore25323024104Freezer