This door gasket is used to make an air-tight seal for the cabinet when the door is closed.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door Sweating | Door won’t open or close | Leaking
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Maytag, KitchenAid, Kenmore.
Part# W10830055 replaces these:
AP6027230, W10163991, W10191105, W10443238
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anthony
March 20, 2019
Website shows right door seal grey but no left door seal? I would think they would be two different part numbers. Or when you order one does it come with both? I need both.
For model number GI7FVCXWY01
Hello Anthony, thank you for your question. The same gasket is used for either door. There are three colors: Door Gasket - White Part Number: PS11754791, Door Gasket - Black Part Number: PS11754708, Right Hand Door Gasket, Grey Part Number: PS11759512. The grey gasket has a description of "Right hand" door gasket, but this will work on both fridge doors for your specific appliance. I hope this helps!
39 people found this helpful.
Was this helpful?
Thank you for voting!
Derek
May 7, 2019
The picture appears to have 2 seals in it (one for each door). Is that correct?
For model number GI5FSAXVA00
Hi Derek,
Thank you for your question. This is just one gasket that has been folded so it can appear in the photograph. I hope this helps. Thank you and have a great day!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Delrose
July 30, 2019
Does part for door gaskets comes with left and right. If not, give me the order number for each one
For model number MFI2569VEM10
Hi Delrose, thank you for your question. The gaskets are sold individually. If you need two then you will have to order two. If you are looking to purchase this part then you can do so by either adding it to your cart and going through the check out process online, or by calling our customer service line and ordering with one of our agents. I hope that helps. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Yolanda
August 29, 2019
This door gasket for Amana frig replaces gasket # w 10443238.If i order the above gasket w108330055 and does not fit,do i get "all" my money back when i return the item?
Hi Yolanda, thank you for your question. The only way that we can guarantee a part will work with your model would be with the model number that is listed directly on your appliance. We have a 30 day Return Policy. More information can be found here: https://www.partselect.com/Thirty-Day-Returns.htm. Parts must be in resaleable condition to qualify. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Melvin
January 3, 2020
Refrigerator doors pop open very easy particularly the right side door. Would this be an issue with the door gaskets or is there some magnetic part that needs to be replaced? Thanks
For model number 59678533802
Good Day Melvin. Thank you for your question in regards to your unit (Model Number 59678533802). The first thing that we would recommend is to wash the door gasket and the face of the cabinet it touches with mild detergent and water. This should remove any oil that has collected on the gasket or sealing surface helps the magnet hold the gasket tighter. Hope this helps. Best Regards.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Marty
August 6, 2021
I need to replace my door gasket. Do you sell the OEM Maytag gasket from Maytag or do you have another source for your parts. Thank you
For model number MFI2269FRZ00
Hello Marty, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11759509 for the Left Side Grey Gasket and PartSelect Number PS11759512 for the Right Side Grey Gasket. All of our parts are OEM. We hope this helps!
I need the grey door gasket for the right hand door when I am facing the fridge.
Right and left hand doors are different sizes but the parts diagram shows they are the same
How do I know I’m ordering the right one
For model number 59679243017
Hello James, thank you for writing. There is a different number for the left and right sides. The Door Gasket (Left, Gray) is part PartSelect Number PS11759509 and the Door Gasket ( Right, Gray ) is PartSelect Number PS11759512. Good luck with your repair.
Hello, just wanting to confirm this is the correct gasket for the right French door of a Kenmore elite model 596 79543010.
For model number Kenmore elite model 596 79543010
Hello Ariane, thank you for the question. We have researched your model number and this gasket will fit your model number. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Joseph
October 16, 2022
I have a side by side with lower freezer, the right door seal ( non ice maker) door is torn. Is this the correct part and can I replace it myself.
For model number F12269drm01
Hello Joseph, thank you for your question. Yes you are correct. The Right side Grey is part PS11759512 and Door Gasket - Grey - Left Side is part PS11759509. Good luck and have a great day.
Can you please tell me the approximate measurements of the door gasket, PartSelect Number PS11759512?
For model number MF12269DRM01
Hi Danielle,
Thank you for your question. The door gasket measures 42 inches by 17 inches. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 8 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Old refrigerator gaskets were worn out
I unboxed the replacement gasket set and inspected them for damage. Then I opened the left refrigerator door and grabbed the right hand corner of the old gasket and removed it. I then aligned the new gasket with the door and using my fingers pushed the gasket into the gasket grove. I used my thumb to seat the gasket. I repeated the process for the right door. Total time was under 15 minutes.
Ron from LIVERMORE, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
16 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Torn/damaged refrigerator door gaskets.
Uncurl new gaskets (set out on a table or countertop) and let them get to room temperature so they straighten out. Use hands to pull off old door gaskets. Starting at corners, use hands to push gasket into the groove on the door. Make sure gasket is properly seated all the way around the door. If some part is still wrinkled or bent, carefully use a hairdryer to heat it a bit and smooth it out.
Elizabeth from ALEXANDRIA, VA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Torn door gaskets
Took out the old and installed the new.. The fit was perfect.
Charles from LARGO, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gasket Torn
Removed old gasket and installed the new one. Used a hairdryer to smooth out the edges.
Mark from THE VILLAGES, FL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left door bar too close to squeeze in seal.
Since it wasn't possible to squeeze the seal in between the door groove and the bar which closes the gap between the two doors, I cut the seal side in half and snaked it in from the top and the bottom. Since the cut is behind the bar when the door is closed there is no compromise in getting a good seal around the door. Note there was no apparent way to easily remove this bar.
Jim from FORT MYERS, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gaskets wore old and broken
Googled how to replace door gaskets and watched a video and did what it said and was so easy. took longer to remove everything and the shelves and storage bins and wash down the refrigerator than replace the door gaskets.
Robert from NACOGDOCHES, TX
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Existing Door gasket was cracked allowing the magnetic strips to fall out
Very easy. Just get hold of the gasket with your strong fingers and pull it out of the groove it is in. Clean the groove, I used Windex and paper towels. On the new gasket there are 2 wide areas on the vertical part. these must be facing toward you and on the handle side of the door. start at the tor center of the door and work the gasket in with your fingers outward to the corners then work on the bottom of the gasket in the same manner, then start on the vertical gaskets. when you think every thing is aligned take your thumbs and press very hard all around. You may have to repeat.
Les from N LITTLE ROCK, AR
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tear in the magnetic seal
Layer it out for 24 hrs used hairdryer on med for the wrenkles.
Pete from Madison, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
17 Reviews
4.9
Filter By Rating:
5 Stars
15
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Quincy S - November 14, 2022
Verified Purchase
Refrigerator gasket
Perfect fit!
★★★★★
★★★★★
Jerry W - November 5, 2022
Verified Purchase
Very easy to install
The part received is better than old one.
★★★★★
★★★★★
Jason B - July 14, 2022
Verified Purchase
Easy fix.
Set the gasket on the driveway for a few hours. Then removed and replaced the gasket. Just took a couple of minutes.
★★★★★
★★★★★
Bruce B - January 10, 2022
Verified Purchase
Excellent product
Fit - excellent, installation - easy, perfect
★★★★★
★★★★★
Myra M - November 11, 2021
Verified Purchase
Very easy repair
I did not expect this to be as easy as it was. Thanks so much for the support.
★★★★★
★★★★★
William D B - August 20, 2021
Verified Purchase
Worked as expected.
Gaskets were overpriced after doing my search. Order was received quickly.
★★★★★
★★★★★
Ruben R - May 2, 2021
Verified Purchase
Expensive, but easy to replace
The part arrived promptly and in good condition. It does require that you allow it to conform to it’s proper rectangular shape. The old part was easy to remove and replace. I would have thought this part would be less expensive, but it is the correct item.
★★★★★
★★★★★
Elizabeth E - December 4, 2020
Verified Purchase
Worked as expected
Easy to install, no tools needed. Fit perfectly. This product works on both doors of Whirlpool French door fridge, GI5FSAXVY00.
★★★★★
★★★★★
Patrick M - December 4, 2020
Verified Purchase
Easy Repair
Fit well easy install
★★★★★
★★★★★
Steven J - October 15, 2020
Verified Purchase
Easy to install
The product came early and the directions were easy to follow. Fits like a glove. Actually needed to adjust the temp because it was getting too cold.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
