Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
September 27, 2022
Does the Assembly part # PS11757057 include the Drain pump PS11753379?
Thanks
For model number WDF760SADT0
Hi Michael, thank you for contacting us. According to our research part number PS11757057, Dishwasher Sump and Motor Assembly, includes the drain pump. If you require assistance to place an order, please contact customer service. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Charles
March 24, 2020
Washer works on and off. Does not clean dishes or heat up. Had a repair man
Twice. Replaced the control board. Still not working. Said the washer pump is bad.Wondering if it is worth putting more money into it. only five years old.
For model number WDT920SADM1
Hello Charles,
Thank you for your question. Yes, our sources suggest replacing the pump motor under part PS11773089 for your model to fix the washer issues. We hope this helps.
Hi. My dishwasher turns on and off as it should. It fills with water and drains fine. When wash is finished rhe soap is still sitting on the bottom of washer. Everything in the washer is wet also. Do you recommend the sump And motor part that is $320.08? I also noticed another that is around $250?
For model number WDF760SADM0
Hello Patrick, Thank you for your inquiry. You can test the sump and motor with a multimeter to see if it is causing the issue but we have researched the model you have provided and we would recommend checking the following parts to fix your issue: the dishwasher filter, the water inlet valve, the circulation pump, the turbidity sensor, and the filter screen. Also check your spray arms and make sure they are not clogged. You can test the other parts with a multimeter as well. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
Washer still has water in the bottom and then it seems to drain out later, leaving a film in the bottom. Still seems to clean OK, but not as well as it did.
For model number WDF760SADT0
Hello Michael, thank you for contacting us. Please investigate the drain tube and hoses for blockage and kinks. A clogged drain line can create such a problem. Given that the drain line is good, the most probable cause is a faulty drain pump, part number PS11753379. If you require assistance to place an order, please contact customer service. We hope that helps!
