Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
July 18, 2019
Will the igniter in the cap be the problem if it doesn't lite right away
For model number wfg530soeso
Hello Joe, thank you for inquiring. You will want to replace the Bake Igniter part PS11747217 for your model to fix this. Good luck with your repair!
Was this helpful?
Thank you for voting!
Kim
January 25, 2020
Hello,
I purchase my unit approximately 3 years ago, unit work great....until the following...
1- left and right front burners do not light at times...(i am using lpg, there is gas flow present and the igniter is sparking...not sure if the spark is too weak.
2- the oven igniter would glow but the oven burner would not light...not sure if the igniter is too weak...notice...the oven burner would light up and work properly only when i turn on any of the top burners...update...the oven will only start and maintain temperature only when the top burner is on
For model number WFG505M0BS0 (LWF7551)
Hello and thank you for writing.
If you have more then one burner displaying the same symptom this is usually caused by a faulty wiring harness PS9494666 as well as the oven harness PS11727875 which is displaying related problems as you describe. You should check the part(s) for signs of damage, and replace as necessary. We hope this helps. Please contact us anytime if you require further assistance.
Whirlpool stove the bottom front right Burner fires up but with a very low flame, the other 4 Burners work fine. The burner in question lights up , but with a low flame. Do you think replacing the Front XL Burner Base will solve this issue or even better if you have any suggestions to troubleshoot the Burner to save money, the gas is getting in to all 5 burners and the oven works great
For model number WFG505MOBS3
Hello Marco, thank you for your query. According to our research, the issue is probably with the burner valve, part number PS11731639, but before replacing it, we would recommend checking the following parts: the surface burner, part number PS11755872, and the orifice holder, part number PS11775329. We hope this sorts out your problem!
