Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anthony
March 10, 2018
The main control board does not light up. Measured 220 volts available at outlet. Would i need an internal bias stat or would the problem be the control board? It appears to be intermittent. I plugged and unplugged the dryer a few day ago when the control board would not illuminate and the control pad lit up. Unfortunately that did not work today.
For model number WED7300XW0
Hello Anthony, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: thermal fuse, thermal cut off kit, internal bias thermostat, high limit thermostat, the sensor, and the door catch. You can test the parts with a multimeter. If you rule out those parts, then check the control board and control panel. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.