This is a surface element for the stove top on your range. It supplies heat to the top of the range cooking area. This model is 2100 watts and is eight inches in diameter. It has looped terminal ends, and five turns. The most common reason for needing to replace this part is if your current element is not retaining heat. The first step to this repair is to make sure the burner control is set to off, and that the element is cool to the touch.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Phyllis
May 30, 2019
Front element gets red hot! I could have it on low and it will click and get red hot
For model number WFC310S0AW0
Hello Phyllis, Thank you for the question. Normally this indicates the switches that control the element are defective and will need to be replaced. Part #: PS11740774 and Part #: PS11740783. Hope this helps!
I am looking for 2 surface element 6". What is the price
For model number RF261PXST0
Hello Thomas, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11743366. Hope this helps!
The burner is malfunctioning, meaning when in use it will all of a sudden go to high heat. Can’t just turn the knob but will have to turn knob to off. So in listening to a video, i looked at the terminals and one indeed is corroded and needed to be replaced. Video suggests replacing terminal block. What is this and the difficulty of replacing it? Thanks.
For model number RF365PXK
Hi Maggie, thank you for your question. We actually have a video that shows how this installation is typically done, here is where you can view it: https://www.youtube.com/watch?v=JzL521s0nfg. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
James
November 14, 2018
The 8 inch burner, does it have a hook to connect to the chrome dip .I bought locally and it didn't fit because there was no hook to connect the drip
For model number rf263lxtq3
Hello James, Thank you for the question. Sorry I am not showing a Hook on the element. The element does show a Y frame that would fit into groves or holes in the drip pan to keep it in place. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Vicki
March 12, 2020
I need the 8" burner element. Its no. 8 in the description. Can you give me the correct part no. To order along with pricing?
For model number WFC310S0EW0
Hello Vicki, thank you for your question. The 8" element for your appliance is PartSelect number PS11751367. This element is in stock at a cost of $71.77 plus applicable shipping fees and taxes upon checkout. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nancy
April 29, 2022
Large front coils when put on high smokes. Nothing on it. Can I go to buy one from store or does it take a special coil
For model number WFC310S0ES0
Hello Nancy, Thank you for contacting us. The parts are model specific. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX11751367. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Debra
2 days ago
My range needs all new surface coil elements.
For model number WFC310S0AWO
Hi Debra, thank you for reaching out. The 8-inch surface element, part number PS11751367, and the 6-inch surface element, part number PS11751368, are compatible parts for your model. We hope this is what you were looking for!
Will a surface element from a GE, Hotpoint or RCA range work with this model of Whirlpool range?
For model number WFC310SOAWO
Hello Debra, thank you for contacting us. Based on our research, the range surface element, part number S11751367, is compatible with your model. We hope this information helps!
Was this helpful?
Thank you for voting!
Gurdeep
December 1, 2019
It is a Whirlpool electric range and i am looking for coil elements. All 4.
For model number YWFC310S0E
Hello Gurdeep,
Thank you for your question. The larger element is under part PS11751367 for your model, and the smaller element is under part PS11751368, and you need two of each. Hope this helps!
Can I just get the bracket that holds the coil burner in place? Burner works but bracket is broken burner not level.
For model number RF377PXG
Hello Linda, Thank you for your inquiry. We have researched the model number you have provided and the bracket that is underneath the coil is only available as part of the coil element. We hope this helps.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Stove heat was inconsistent and
After turning off the circuit breaker, I removed the elements and pans, raised the top and cut the wires to the receptacle assembly. Stripped the wires, slid on the shrink tubing and applied the wire nuts. I used a hair dryer rather than a match to shrink the tubing. Reinstalled the drip pans and inserted the elements. The instructions were clear and the project was easy. The stove works like new.
More Than Amazing! I found you by searching google and using the make/model of my stove. The photos were so helpful, it made ordering a breeze. The parts arrived as if by magic! (within 2 days). I do a lot of online ordering from different stores and all I can say is that your service was above all of them. I use my stove daily. Not only that, the new parts made my stove look brand new. P.s. I never respond to survey's unless they deserve it.
Uneven heating of surface burners. Occasional electrical sound (arching) when burner was turned on. Also the burner would heat up and cool down while burner when turned on.
Replaced all heating surface burners. We noticed signs of arching on the front left (large) burner so we replaced that receptacle with a replacement receptacle kit. Very quick and easy install (5-10 mins) using the short part select video on receptacle kit information page.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ada L B - April 18, 2022
Verified Purchase
OEM parts are better than generic ones
pleased with this new part. fits into the Whirlpool kitchen range and cooks like it did when the stove was new. thank you. I am pleased to have found you on the internet. I am still not sure how that happened but I saved the info so I can pass it along to other people.
★★★★★
★★★★★
Lloyd M - September 23, 2020
Verified Purchase
Right part, easy replace
Part arrived in good condition and repacked the old part easy and simply
★★★★★
★★★★★
Robb R - November 26, 2019
Verified Purchase
not a new part
I ordered 2 burners, the 6" and 8". The 6" part arrived sealed in plastic and in its own original box. The 8" burner was just tossed in the shipping box with no wrap or plastic at all. Upon close examination, it was obvious that the burner was one that was installed in another stove and then returned. There was some marking on it that led me to this conclusion. If I pay top dollar for a new part, I expect to get a new part. It was more trouble and expense to return it, so I kept it. I will not use this company again, nor will I recommend it to others.
★★★★★
★★★★★
ELVON J - May 1, 2019
Verified Purchase
Fits just right.
Fit the stove. Was worried I ordered the wrong part. Satisfied
★★★★★
★★★★★
Thomas E - March 15, 2019
Verified Purchase
Easy repair after straightening the electrical wires
The electrical wires were bent at about a 45 degree angle and were poking through the box when I received the part. I straightened the wires and the part fit perfectly. It was also easy to install.
★★★★★
★★★★★
Patricia K - February 8, 2019
Verified Purchase
Replacement elemrnt
Order arrived in timely manner and working well as replacement part for my stove.
★★★★★
★★★★★
Rob R - December 20, 2018
Verified Purchase
Perfect! Problem solved!
I had tried to find correct burner at Home Depot. They didn't have the exact one that was needed. I'm glad I ordered in conjunction with the model number. The burner I received was exactly what I needed. Problem solved.
★★★★★
★★★★★
Vickie A - September 20, 2018
Verified Purchase
Easy
This part was what was needed and of course easy to install and works like a charm.
★★★★★
★★★★★
Joanne B - August 12, 2018
Verified Purchase
Surface Element as described
The part came securely and on time and the element works perfectly. Thank you.
★★★★★
★★★★★
Michael W - July 11, 2018
Verified Purchase
Replacement Element - Exact Replacement
Needed the exact heating element replacement part for a Whirlpool stove and You guessed it - Part Select had it. Plug in replacement - easy and stove is OEM NEW!
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff