Whirlpool/Whirlpool_Thumb/ZQJCWGTU.gif
See part 6 in the diagram
Replacing your KitchenAid Dishwasher Detergent Dispenser Assembly play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Detergent Dispenser Assembly

★★★★★
★★★★★
27 Reviews
$119.40   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11750167
Manufacturer Part Number WPW10199696
Manufactured by Whirlpool
Product Description

Detergent Dispenser Assembly Specifications

This part releases the detergent and rinse aid into the dishwasher. Light grey in color. The detergent dispenser attaches to the inner door panel and holds the dishwasher detergent and rinse agent in a covered compartment.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Door latch failure | Not cleaning dishes properly | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Whirlpool, Maytag, Kenmore.
Part# WPW10199696 replaces these:
AP6016874, 8565815, W10077882, W10199696, W10224429, W10224431
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

29 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Justin
August 16, 2017
Is it possible to order just the little latch on the detergent dispenser or do you have to order the whole system?
Hi Justin, Thank you for your inquiry. The latch for the detergent dispenser is not sold separately. The part is sold with the dispenser. I hope this helps. Thank you and have a great day!

41 people found this helpful.

Was this helpful?
Thank you for voting!
Jim
September 5, 2017
Is it possible to order just the plastic rinse cover plug from the detergent dispenser?
For model number KUDS301VSS4
Hi Jim, Thank you for writing. The Rinse Aid Cap part number for this dispenser is PS11748135. Hope this helps!

13 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Sherry
December 1, 2017
Soap doesn't always dispense when it it is supposed to. Sometimes I find the tablet in bottom of dishwasher, dishes aren't clean. Tried just liquid this am and liquid did the same thing.
For model number KUDL03IVWH0
Hi Sherry, Thank you for the question.Sounds like the dispenser latch or wax motor that releases the latch is defective.These parts are not sold separate from the dispenser its self so the full dispenser will need to be replaced, PartSelect Number PS11750167. Good luck with the repair!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Joe
October 5, 2017
For this model it seems that the "top" screws holding the control panel must be removed to get the door cover off. Instead of leaving them in and only removing the 3 "bottom"screws on each side as shown in the video. Is that correct?
For model number KUDS50FVSS0
Hi Joe, Thank you for your inquiry. For information on the installation on this part, there is a video listed with the part that you may reference on how to install it. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Mary
March 2, 2018
All i need is the cap for the detergent dispenser for the Jet dry part of the unit. Everything else is fine with the detergent dispenser!
For model number MDB6709AWW1
Hi Mary, Thank you for your question. The part number listed under your model number for the cap is PS11750166. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Hubert
March 13, 2020
I need to replace the detergent rinse dispenser. How do i remove the old dispenser from the door panel.
For model number GU2700XTST1
Good Day Hubert. Thank you for your question in regards to your unit (Model Number GU2700XTST1). The following URL is to a video we have prepared that should help you with this: https://www.youtube.com/watch?v=jCBjkjAQRFM&feature=emb_logo. We hope this helps! Best Regards.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Barbara
January 24, 2020
This dispenser was replaced in 2019 as it would not stay latched. The new dispenser leaks out the finish aid product with every wash. What is the life of this part? My dishwasher is 27 years old but has always worked until these issues. What do you recommend.?
For model number KUDS301VBL3
Hi Barbara. We do not have an estimated life of the dispenser. We do however have a one year warranty on our parts. I would replace it with PS11750167. The reviews are great as well.Thank you for your question and good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Tammy
December 1, 2017
I only need the little blue thing to latch the detergent door.What part number is that?
For model number Mdb7759aww2
Hi Tammy, Thank you for the question. The latch parts are not sold separate from the dispenser assembly,Part Number: PS11750167. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Frederick
April 12, 2018
All i need is the the dispenser cap, not the whole unit. Can i get just the screw in cap?
For model number MDB7749AWB2
Hello Frederick, thank you for your question. You are able to order just the Rinse Aid Knob. The PartSelect number for that part is Part Number: PS11750166. Please enter the part number into the site for current price and availability. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
GREG
February 20, 2019
This video is incorrect for models with controls on the top edge of the door. I have removed the 6 suggested screws, and it's evident that more need to be remover. Which ones?
For model number MDB8959AWS4
Hello Greg, thank you for your question. We would recommend removing any other screws you see around the edge of the door. Also look for screws in the top corners. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your KitchenAid Dishwasher Detergent Dispenser Assembly

Replacing your KitchenAid Dishwasher Detergent Dispenser Assembly play video
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 25 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
latch on dispenser cover broke
Printed door assembly parts list and photo from KitchenAid website. (With the absence of instructions, it was a big help.) Remove door cover. You'll need a star driver bit. Remove the old dispenser. Note how the metal clamp and black cover sheet are positioned. Install the new dispenser. Insure the wiring harness is snapped in place. Replace the door cover. Not difficult; just some patience. One more hint ... be careful when taking the door cover off and you won't have to disconnect any other wiring.
  • Craig from Austin, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
  • Parts Used:
    WPW10199696
135 of 149 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic catch that releases the soap dispenser door broke off, the soap dispenser door wouldnt stay shut.
Removed the screws holding the metal front of the dishwasher on, removed the 6 screws holding the dispenser in place. Put the new part in and put all screws back in where they were. Put the front back on the dishwasher with its screws, done.
  • Patrick from Byron Center, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
  • Parts Used:
    WPW10199696
84 of 105 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher dispenser did not open
Before starting the repair, I turned off electrical power to the dishwasher at the circuit breaker.

Instructions for removing the door cover panel were included in my dishwasher installation manual. The instructions were in a section for adding a custom door panel. For my dishwasher, this only required removing six screws using a Torx (star shaped) driver, size T15. I found it possible to support the door cover by myself with a knee under one side and one hand wrapped around the opposite side, but another person would be helpful.

The electrical connector to the dispenser has a small tab to lock it in place. I gently pried the tab back a *little* and pulled out the connector.

There are six screws holding the dispenser in place. In this case, they were 5mm hex head screws. The screws hold a metal bracket in place and a vinyl flap is sandwiched between the bracket and the inner door panel. The vinyl flap has three holes, with two of the screws passing through the left and right holes, and the middle hold goes over a plastic tab on the dispenser.

After removing the bracket and vinyl flap, I found that there were two metal tabs holding the dispenser in place. These tabs are part of the door sheet metal. Gently prying them back a *little* released the dispenser (which would have fallen out if I hadn’t kept a hand on it).

I pushed the new dispenser through the opening until it clicked into place with the metal door tabs holding it. Then I put the vinyl flap in place with the middle hole over the plastic tab on top of the dispenser, and put the metal bracket over that and attached with the hex head screws.

Next, I reconnected the electrical wire to the dispenser, installed the door cover panel, turned on power at the circuit breaker, and tried a wash cycle. The new dispenser works great!
  • Jonathan from Keizer, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
  • Parts Used:
    WPW10199696
50 of 54 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring on soap dispenser failed + jetdry cap melted
To replace the soap dispenser you need to take off the front of the door, which requires removing about 12 torx screws - of 2 different lenghths (so keep track). Then the soap dispenser is held in place with 6 very small 4mm hex screws (why they used these instead of normal phillips??). Both my hex sets stopped at 5mm, so I had to go get one. Tool has to be narrow (not one that is flared) because the clearance between the screws and the unit is very tight. There is one small two-wire connector with a press-in connector that at first looked hard to pry off, but just grab it with channel-lock and it will just come off. Remember which way the wires are facing (ie. up or down). Be sure to note how the vinyl flap (that covers the back of the dispenser) attaches, then pull out the old one. Once the new one is in, the hardest part is putting the door cover back on. I'd advise having an extra set of hands. Made it much easier.
  • Eric from San Francisco, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
  • Parts Used:
    WPW10199696
28 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken catch on soap dispenser door
1. Removed six screws securing outer panel to dishwasher door.
2. Removed outer panel which exposed back of dispenser.
3. Remover six screws holding dispenser.
4. Removed dispenser.
5. Installed new dispenser.
6. Replaced six screws.
7. Reattached electrical connection to dispenser relay.
8. Reinstalled outer panel with six screws.
  • W. C. from San Rafael, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
  • Parts Used:
    WPW10199696
26 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The latch to the soap dispenser appeared to break. The latch was found on the floor.
After I took apart the inside of the door, removing 12 star screws, I was able to see the inside of the automatic soap dispenser device. Since I now had the new device to look at, I was able to replace the latch pin back in the existing device and it worked!

I now have a replacement if the device actually breaks in the future and looking at the small plastic pieces, it will probably happen sooner or later.
  • Dennis from Olivenhain, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Parts Used:
    WPW10199696
17 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Change detergent dispensor
Take 10 lower star srews from inside of door (5 per/side) that hold on front. Remove front door panel. Remove 6 screws in detergent dispenser and replace.
  • Michael from North Manchester, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Parts Used:
    WPW10199696
17 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The soap dispenser would not work
After reading other posts I opened the dishwasher door put a support underneath it. Knowing that all the screws were not the same I carefully unscrewed them and placed them on a towel in order of extraction. After all the screws were taken out, I lifted the door up gently and lifted it out of its place and put it aside. Now I could see the hex screws holding in the soap dispenser. I then unscrewed the screws and place the frame aside. Next I gently pulled the electrical connector to the dispensing unit off. After locating a snap tab on top on the left hand side and one underneath on the right hand side, I gently lifted the tab and the dispenser unit moved slightly forward. After gently prying the lower tab on the right hand side the dispensing unit was loose. I just reversed the process to put things back together. I was not necessary to have any help taking things apart but it was very helpful having a second set of hands when we put it back together. Lining up the screws for the door was much easier with two people. After installation, I started the dishwasher to check for leaks. Everything was fine. Very satisfied to be able to repair/replace this unit without calling a tech. If you can change a spark plug on a lawnmower you can replace a soap dispenser on a dishwasher such as mine. Very quick delivery from parts source. Thank you.
  • JOHN C. from GIG HARBOR, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
  • Parts Used:
    WPW10199696
14 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dispenser door broken
very easy, thank you for your quick service
  • Michael from Boca Raton, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
  • Parts Used:
    WPW10199696
14 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
melted
replaced
  • Darren from Edmonds, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Parts Used:
    WPW10199696, WPW10078215
14 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
27 Reviews
4.6
Filter By Rating:
  • 5 Stars
    22
  • 4 Stars
    2
  • 3 Stars
    1
  • 2 Stars
    2
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750167
Manufacturer Part Number: WPW10199696
Brand
Model Number
Description
Kenmore
66513212K901
Dishwasher
Kenmore
66513212K902
Dishwasher
Kenmore
66513213K900
Dishwasher
Kenmore
66513213K901
Dishwasher
Kenmore
66513213K902
Dishwasher
Kenmore
66513219K901
Dishwasher
Kenmore
66513219K902
Dishwasher
Kenmore
66513242K900
Dishwasher
Kenmore
66513242K901
Dishwasher
Kenmore
66513243K900
Dishwasher
Kenmore
66513243K901
Dishwasher
Kenmore
66513249K900
Dishwasher
Kenmore
66513249K901
Dishwasher
Kenmore
66513752K600
Dishwasher
Kenmore
66513752K601
Dishwasher
Kenmore
66513752K602
Dishwasher
Kenmore
66513752K603
Dishwasher
Kenmore
66513753K600
Dishwasher
Kenmore
66513753K601
Dishwasher
Kenmore
66513753K602
Dishwasher
Kenmore
66513753K603
Dishwasher
Kenmore
66513754K600
Dishwasher
Kenmore
66513754K601
Dishwasher
Kenmore
66513754K602
Dishwasher
Kenmore
66513754K603
Dishwasher
Kenmore
66513759K600
Dishwasher
Kenmore
66513759K601
Dishwasher
Kenmore
66513759K602
Dishwasher
Kenmore
66513759K603
Dishwasher
Kenmore
66513762K600
Dishwasher

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service