Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
October 30, 2019
Washer will not spin or drain
For model number WFC7500VW2
Hello Ken, thank you for your question. We would recommend testing the door latch, Part Number: WPW10192995 first. This is the most common cause of the unit not spinning or draining. If that isn't the issue the drain pump, or main board could be the issue. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ken
October 30, 2019
Washer will not spin and drain error code a?10 comes up . Is the part # ps11749963 the possible problem?
For model number WFC7500VW2
Hello Ken, thank you for inquiring. The A10 error code is indicating an issue with the drain. If the drain is not clogged, then you have a faulty Drain Pump, part number PS11755180 for your washer. Good luck with your repair!
Was this helpful?
Thank you for voting!
Peter
June 30, 2021
Washer sometimes won't start (heard click after start button pressed but door locked and draining/unlocking lights won't blink) until given a bang on door around the door lock/switch area. Is that a defective switch or loose connection?
For model number Whirlpool WFC7500VW2
Hi Peter,
Thank you for your question. If your washer will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door switch and the door lock assembly. We hope this helps! Good luck with the repair!
Load washer close door set cycle press start door lock light blinks open and close door door locks and light is solid red. Press and hold start machines starts then stops and Drain/unlock light flashes only way to clear it is cancel.
For model number WFC7500VW2
Hi Ed, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the control board, part number PS11749949, to fix the issue. It manages the washer's functions such as filling, washing, draining and spinning. We hope this solves your problem!