This is a replacement end cap for your refrigerator pantry drawer. The pantry drawer has an endcap on either side, which encloses the drawer. This end cap is for the left side of the pantry drawer only. Make sure you need the left side end cap before you order this part. This part is made of white plastic, and will fit into position on the left side of the pantry drawer. This part is approximately 20 inches wide and 7 inches tall. It is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
Jenn-Air, KitchenAid, Whirlpool, Maytag.
Part# WPW10122078 replaces these:
AP6015356, W10122078
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
December 6, 2017
I need to replace both the left and right endcap pantry parts (parts #w10121977 and w10122078 ) that the pantry door slides on. I do not see any screws holding them on. Do they snap in place? I don't want to force anything and possibly cause more problems. The video's i've watch show screws that need to be removed. If they snap off is there a particular way of getting them off?
For model number KFCS22EVMS5
Hi Ron,
Thank you for your question. If you would like to purchase the end caps, you may order them online, through one of our online chat sessions or by calling our customer service line and anyone would be happy to assist you. There is a comment that a customer has left on our website on how they installed the part that you may reference, "Obviously remove the glass shelf and supports plus all three drawers first. Being as there are no screws or visible means by which the Pantry Drawer End Cap is attached and being as the part entails removal of the vent slider from the back, there presents a problem. The backside of the end cap has hooks that clip into the side of the refrigerator wall. Use caution in raising the end cap up to release the clips. It does help using the screwdriver beneath the end cap and some movement with hands but it will come up along with the backside attachment. That isn’t the problem.
The difficulty is in (1) noting and remembering how the assembly came off and apart. (2) Putting the moving parts inside of the end cap like they came out and (3) replacing the back and side at the same time. The back assembly has a clip that inserts to the left. It is important to insert that first. The side portion inserts by placing above the slots and pushing in (to the right) and down at the same time. It all comes together and you will wonder how you did it." I hope this helps. Thank you and have a great day!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Marilyn
September 1, 2017
Is this size correct for counter depth KitchenAid refrigerators. Left pantry drawer end cap
For model number KFCS22EVMS0
Hi Marilyn,
Thank you for contacting PartSelect. We do not go by the size of the appliance as the model number lists all the parts available for your fridge. Checking the model number you provided this would be the correct part for the left side if you are standing in front of the appliance looking in.
Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Maury
February 11, 2019
I have the purchased from you the left endcap referred to in this question.How is the removal of the vent slider from the back accomplished?
question:
i need to replace both the left and right endcap pantry parts (parts #w10121977 and w10122078 ) that the pantry door slides on. i do not see any screws holding them on. do they snap in place? i don't want to force anything and possibly cause more problems. the video's i've watch show screws that need to be removed. if they snap off is there a particular way of getting them off?
ron for model number kfcs22evms5
december 6, 2017
answer:
hi ron, thank you for your question. if you would like to purchase the end caps, you may order them online, through one of our online chat sessions or by calling our customer service line and anyone would be happy to assist you. there is a comment that a customer has left on our website on how they installed the part that you may reference, "obviously remove the glass shelf and supports plus all three drawers first. being as there are no screws or visible means by which the pantry drawer end cap is attached and being as the part entails removal of the vent slider from the back, there presents a problem. the backside of the end cap has hooks that clip into the side of the refrigerator wall. use caution in raising the end cap up to release the clips. it does help using the screwdriver beneath the end cap and some movement with hands but it will come up along with the backside attachment. that isn’t the problem. the difficulty is in (1) noting and remembering how the assembly came off and apart. (2) putting the moving parts inside of the end cap like they came out and (3) replacing the back and side at the same time. the back assembly has a clip that inserts to the left. it is important to insert that first. the side portion inserts by placing above the slots and pushing in (to the right) and down at the same time. it all comes together and you will wonder how you did it." i hope this helps. thank you and have a great day!
For model number JFC2290VPY5
Hello Maury, Thank you for contacting us! While we do not have an installation video for this part, we do have a few customers who have provided step by step instructions on our website. This information can be found on the page for this part, directly below the Q&A section. Hope this helps!
Was this helpful?
Thank you for voting!
Tanya
October 3, 2019
Hello :0) i am in need of replacing a piece around the deli center because the left tab that holds the lid/top on has broken. Is this the correct part? Having a hard time seeing the tab part on here to know that its the one. Thank you
For model number w10122078
Hello Tanya, thank you for writing. We would be happy to look into this, but we will need the model number for your refrigerator to do so. We look forward to hearing back from you!
Was this helpful?
Thank you for voting!
Blake
January 22, 2023
Is this the correct left side pantry rail for my fridge. Looks like it might be shorter front to back then my existing one. Thank you.
For model number MFI2670XEM5
Hello Blake, thank you for your inquiry. We have researched the model you have provided and do not show this part as compatible. The compatible part number is PS11738134-for your model, both sides come as a kit. We hope this is helpful.
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 8 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
brocken holding pin for Deli Center.
took upparts then put back together.
Mark from BUFFALO GROVE, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tin at the top left of the panel was broken
Remove the Veggie shelf top. Remove veggie tray. Pull the clip on the center of the left panel - lift and pull forward. Install new panel by inserting the two guide pins at the rear of the frig and move the panel to a 45% angle so you can install the veggie lid pin into position before moving the panel down into the secure position. You will hear the clip seat into position. If you do not do this I am not sure how the lid pin can be installed without breaking it.
FRANK from FARRAGUT, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left side end cap deli drawer holder was broken
Ordered left side end cap from Parts Select. They sent me the right side end cap. Had to return the part. They did refund the part price but it cost me shipping both ways. Had to order the part from another vendor. After receiving the correct part it took 19 minutes to remove some shelves, replace the part and replace the shelves, deli drawer and deli cover. Very easy.
Peter from Alexandria, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Snapped the deli drawer lid holders.
Watched numerous U tube videos to prepare ourselves as well as instructions from other posters. Tried to pay attention on how we disassembled thing with limited success. Installing the new end caps proved to be easier that we expected since they weren’t screwed in but just snapped in. We think that’s because it’s a newer model that what we saw on U tube.
The "axle" for the Deli Center lid broke when struck by an orange dropping from above.
You need to remove both humidifier drawers plus the glass shelf for the bottom of the humidifier drawers and the bar at the front as a start. If I had known this before starting it would have sped up the install time. Then, pull out the deli drawer.
To remove the end cap (either side) there is a plastic tab to push down on just over halfway back and then you can slide up the front of the end cap. Once you have slid up the front of the end cap a few inches, (past the channel it is locked into), you can pull it forward. You can observe the configuration on the spare part to see how this needs to be done.
To install the new end cap, reverse this process. The trickiest part is then re-inserting the deli drawer and the lid. Getting the lid onto the two axles was a bit of a struggle as the fit is very tight. Re-installing the humidifier parts is much easier. My repair time included using the opportunity to clean all of the removed drawers and shelves. If you know about the need to remove the humidifier drawers ahead of time and eliminate the cleaning I think this would take less than 15 minutes.
Bruce from KIRKLAND, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pin holding darwer lid boke off.
Must remove all shelves, pantry drawer , bins above pantry drawer. Once everything is out of the way grasp the old, broken end end and pull directly straight up, if the refrigerator is a little older it may take a very strong pull. Needless to say this model is the newer model with no screws holding the end cap in place. Once the old piece is out just located the three pins position the new piece over these pins and press down should clip right into place. Very easy after old piece is removed. Take a picture of the bins and drawers before you start so you have a reference when returning those pieces back.
Jack from HOLLAND, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plastic pin on the end cap holding the lid to the "Deli Center" drawer broke when the refrigerator door closed with the drawer open.
1) Remove Deli Center drawer and lid 2) Remove the two Crisper Drawers above the Deli Center 3) Remove the glass shelf above the Crisper Drawers. 4) Remove the front and brackets that held the glass shelf. 5) Remove the broken end cap by sliding it upward off the brackets that hold it to the side of the refrigerator, 6) Slide on new end cap. Replace the other parts in reverse order of removal. You will probably want to clean the parts you have removed before reinstalling. Easy- peasy.
Jim from PLANO, TX
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
None
Ez job. Perfect fit.
Jon from portland, OR
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
7 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
35 Reviews
4.8
Filter By Rating:
5 Stars
30
4 Stars
3
3 Stars
2
2 Stars
0
1 Star
0
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert S - 24 days ago
Verified Purchase
Easy repair
I have replaced this twice. Poor engineering on Kitchen Aid’s part. Part select to the rescue.
★★★★★
★★★★★
Ellen M - April 6, 2023
Verified Purchase
Pantry drawer endcap replacement
The part came quickly. Worked well. Installation was easy thanks to a customer's detailed instructions.
★★★★★
★★★★★
Melinda W - April 2, 2023
Verified Purchase
Perfect! Fridge functions like new again
Received timely. Easy to fix!
★★★★★
★★★★★
Jerry M - March 16, 2023
Verified Purchase
Fast delivery
Part identical to original
★★★★★
★★★★★
WJ C - April 21, 2022
Verified Purchase
Frig deli drawer end piece
Only took a few minutes to pull all the deli drawer parts out. Replaced both ends & clear cover quickly, & it all fit back together like new. Good delivery time & parts were what I needed & ordered. Will order from them again.
★★★★★
★★★★★
Richard S - April 9, 2022
Verified Purchase
Easy peasy lemon squeezy
This part was incredibly easy to install. I was expecting screws and that I would have to remove tons of parts to get this in but everything is snap in and snap out. So easy literally my 12 year old daughter did. To be fair she was also the one that broke it.
★★★★★
★★★★★
James O - December 15, 2021
Verified Purchase
Perfect fit, not much work
It took me nearly zero time to find and order the part I needed. It arrived without instructions about how to install it but after looking at it for a minute, looking at the area where it needed to go and the other adjacent parts, I quickly figured out how the old part probably came out and how the new one needed to go in. Getting it in took maybe 30 minutes total of looking, figuring it out, taking it out, washing the adjacent shelves and drawers and getting whole caboodle back in place, finished, done and happy wife. And trust me, I'm no mechanic, rocket scientist or anything close to that.
★★★★★
★★★★★
Charles P - November 3, 2021
Verified Purchase
Exact match for OEM
A+
★★★★★
★★★★★
Karen B - September 25, 2021
Verified Purchase
Fast and done right
Came in short time boxed well
★★★★★
★★★★★
Raymond S - August 25, 2021
Verified Purchase
Easy repair with the right part
I received the correct part when and as promised. It also came with simple, easy to follow instructions on removal of the old, broken part and installation of the new replacement.
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
Same-day Shipping
Ships from USA
1 Year Warranty
365 Day Returns
