Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
December 3, 2017
Where is this part (w10083167) physically located? The control module doesn't seem to have access to any fuse.
For model number JDB8700AWS0
Hi Jim, Thank you for the question. This Wiring Harness plugs into the Diverter motor. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tim
December 29, 2017
Will the main wash motor not run if this fuse is bad my diverter runs but not the main wash motor
For model number 665.13123702
Hello Tim, Thank you for your inquiry. The fuse is designed as a safety device to shut off the electrical current if the temperature is too high as measured by the high limit thermostat. You can test this part with a multimeter to see if it is faulty. I would also check the door switch, door latch, and the pump and motor assembly. If you are unfamiliar with how to use a multimeter, there are videos available to assist you. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
