Part Location Diagram of WP9760774 Whirlpool Element, Broil
See part 2 in the diagram
Replacing your KitchenAid Range Element, Broil
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Element, Broil WP9760774

 Fits your YKESS907SS03!
★★★★★
★★★★★
25 Reviews

Rated by 14 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 150.44
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your YKESS907SS03!
PartSelect Number PS11747304
Manufacturer Part Number WP9760774
Manufactured by Whirlpool
Product Description

Element, Broil Specifications

This broil element is found on the roof of the oven. The broil element is at the top of the oven and supplies the heat to broiling. 14" x 15" with 1-3/8" inserts. This part works with the following brands: Whirlpool, Roper, Admiral, Maytag, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, Caloric.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your KitchenAid Range Element, Broil

Replacing your KitchenAid Range Element, Broil
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when broiling | Little to no heat when baking | Oven not heating evenly
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo.
This part works with the following products:
KitchenAid, Crosley, General Electric, Maytag.
Part# WP9760774 replaces these:
AP6014070, 8301514, 9760774
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
25 Reviews
4.6
Filter By Rating:
  • 5 Stars
    19
  • 4 Stars
    3
  • 3 Stars
    2
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 14 reviews. What's this?
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing installation instruction that matched.
burnt out element
good, used tie wire with a hooked end to fish one wire out of the back, to keep from removing the oven
  • Bruce from ELKTON, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven upper heating element went out.
Turned the breaker off to the stove.
Removed 4 screws holding the element in place.
Disconnected the electric connection from element.
I had to replace the screws which were corroded.
Connect the new element electric connection.
Replace the 4 screws.
Turn on the power.
Turn on oven to burn off the smell of the new element.
You are done.
  • Lewis from WICHITA, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out broiler element
The Youtube videos for this particular repair, using part number PS11747304, indicated that the whole oven unit should be pulled out of the wall while working on it, and the electrical clips removed and re-attached from the back.

Because I was doing this as a one-man job, and didn't have anything to place the oven on while working, I turned off the circuit breaker, and performed the entire element replacement from the front.

1. I was very careful after unscrewing the 4 mounting screws (two in the back, two on the top) to gently pull the attaching wires while still attached to the old element.

2. I had 4 mini vice-grips that I clamped (gently) on the insulation of the 4 wires before detaching them from old element. The vice grips prevented the wires from disappearing to whence they came.

3. After completing the old element removal, I replaced it with the new element, attaching each wire where they had been attached to old element, only then removing the corresponding vice grip.

4. With all 4 wires reattached, I carefully pushed the element ends back into the back of the oven... also avoiding the protruding temperature sensor. The element needed to be held in place by hand until the first overhead screw could be re-screwed.

5. The most difficult part of the procedure was actually getting the screws to line up with their holes in the oven body. .. Returning the screws in fact took about half the 30 minutes the whole job took, because their alignment wasn't "keyed" such that the holes easily just lined up. My order was "Top right" - "Back Left", "Top Left", "Back Right".

Once the 4 screws were all satisfactorily tightened back in place, I turned the breaker back on, and hit the pre-heat function on the oven... It smoked a very little (my hands may have been a bit oily) but that quickly dissipated, and the job was complete. I am very thankful that I didn't have a professional come out. My baker wife has used the oven 10-20 times since then, and it seems as good as new.
  • Brian from SEATTLE, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler quit broiling
Turned off circuit breaker to oven
Removed oven door
Removed screws of reflector plate and top and back of oven
Gently pulled element out and down slightly
Removed slide crimps on wires
Replaced reflector plate on new element
Connected slide crimps on wires
Screwed reflector plate with new element to top and back of oven
Done. Total time 22 minutes
Tested and it’s perfect!
Other Parts Used:
Element, Broil Screw
  • Linda from BOLIVAR, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Baking element failed
Remove the oven from the wall
Remove the rear panel
Remove the 2 bottom panels
Lift and fold back the insulation
Remove the element enclosure
Replace the element
Reverse the steps to assemble

* the oven would not preheat and the top elements were working
  • ROBERT from BISMARCK, ND
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The broiler unit needed to be replaced
I was stopped by the third screw on the roof of the oven, which was slightly rusted and would not budge in spite of using WD40! I had to enlist the aid of my son who arrived with better tools, including a SQUARE phillips head socket set. He also had to spend some time pinching and slightly reconfiguring one of the attachments in the back which did not slide together naturally. So, for an 82 year old retired housewife this was not as simple as it looked, but it was a piece of cake for guys like Erik with the know-how and the proper tools!
  • Connie from SAN RAFAEL, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heat element needed replacing
Repair was really simple. Saw that the outer shielding on the existing heat element had degraded and ordered a new element. Part was shipped to my house in two days. Actually took me longer to get the oven door off than to replace the element because the left bracket on the door was slightly bent. Element came out after removing 4 screws and disconnecting 4 wire terminals. I was able to do the repair inside the oven and did not have to pull it away from the wall as the wires were long enough to pull through. I used some painter's tape to tape down the disconnected wires so they would not fall back behind the oven. Then I used a needle-nosed pliers to slightly crimp the wire terminal to the heat element and screwed in the four screws. That was it! Never did this type of repair before and it was really easy. Also estimate that for my 20-25 minutes of work I probably saved over $200 in parts and labor if I hired someone to do it.
  • Michael from ARLINGTON HTS, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broil element burned out/temp sensor questonable
I followed instructions from the videos provided on the Part Select site. As with many such appliances, parts are interchangeable between brands. this unit is a KitchenAid but Whirpool,Kenmore parts interchange...Access from the front is all that's needed however and the only tool required was a phllips head screw driver...the only negative surprise (which the video warned about but I ignored) was the risk of the element leads drawing back through the holes, which 2 did. Save yourself that trouble by securing the wires to the back oven wall with a small strip of duct tape until you're ready to re-attach them to the new element. This necessitated removing the oven entirely for access to the back; the most time consuming aspect being removing/replacing what seemed like 20 odd screws holding the back cover in place! If not for that mistake, entire job would have been under 30 minutes. Well worth the effort and would do it again!
Other Parts Used:
Temperature Sensor Element, Broil
  • Stephen from HOUSTON, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Center broiler element burned out
Removed oven door for easy access. Removed 4 phillip head screws that held broiler element from top of oven. pulled wires a couple of inches out from back of oven and used flat screw driver to help separate the wires connecting the broiler from the oven. Did the opposite to install the new element,.
The best part of this operation was the fact that the part arrived from Part Select by Fed X the next day after ordering it all for a shipping cost of $8.75. Great Service Highly recommend Part Select.
  • Ronald from DAVIS, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace Broiler Element on a slide in range
Using the video from PartSelect I followed the steps shown. Sliding the range out was difficult so I tilted it forward resting the frame on a 5 gallon plastic bucket. I did have to crimp on a new terminal. The repair was straightforward.
  • Richard from EUGENE, OR
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

10 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Yvonne
October 2, 2017
Range broil element has bent downwards on the front. It still glows but it looks like it melted somewhat and has slight bubbles on the front end, I tried to bent it back up as far as I could. Now to replace this element will the whole built in oven unit (electric oven on bottom and microwave attached on the top) have to be removed from the wall? Or can the broiler element be replaced from the inside of the oven? Please advise. Thank you.
For model number KEMS308SSS05
PartSelect logo
Hi Yvonne, Thank you for the question. Yes you have to remove the oven from the wall in order to access the wires and connections in the back. Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Bruce
November 22, 2017
How do you connect the wires to the broiler heating element for a double wall oven inside a cabinet? Do you have to pull out the oven to access the back?
PartSelect logo
Hi Bruce, Thank you for your question. There is a video listed with the broil element on our website that you may reference on how to install it. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Charles
January 15, 2020
Does the top oven of a double oven unit have to be removed from it’s insert, just as a free standing unit has to be pulled out from the wall?
For model number KEBS208SSS04
PartSelect logo
Hello and thank you for writing. Yes, it does you are correct. For access to the wires of the element, you will need to pull the appliance out from the wall. We hope this helps. Please contact us anytime if you require further assistance.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Ruth
May 31, 2019
The video you have provided for this part has the person take out the stove from the wall to do a few things in the back. How would it work for a wall oven.
For model number KEMS308SBL00
PartSelect logo
Hello Ruth, Thank you for the question. The wall oven will also need to be removed from the wall. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Charles Shackleford
March 2, 2020
Can this element be changed out from inside or will the oven have to be removed to get to the electric wires to connect the 4 connectors?
For model number KEBS208SSS04
PartSelect logo
Hello Charles, thank you for your question. Per the installation video on our site of that part you would have to access the back to remove the electric wires that connect to the unit. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Victor Agresti
December 10, 2021
When baking do both elements heat up,my oven takes forever to heat up coil never gets red
For model number KEBK171SSS4
PartSelect logo
Hi Victor, Thank you for your question. When the bake cycle is in use for most electric ovens, both the bake and broil elements will regulate the temperature inside the oven. If the oven is not heating correctly the issue may be with the oven sensor. The oven temperature sensor is the part that monitors the oven temperature and signals the electronic control board to turn the elements on and off. Before removing this part from the oven and testing it with a multimeter for continuity, unplug the oven from the electrical outlet. To test the sensor, you will need to reference your owner’s manual to determine what the correct reading should be for your model, as this varies from model to model. To test it for continuity, use a multimeter on the Rx1 setting and touch the terminals with the probes. This test needs to be done with the sensor at room temperature to produce accurate results. If your test results do not meet the manufacturer’s guidelines, you need a replacement temperature sensor. If the sensor is fine, you will need to check the elements, the electronic control board and the wiring between the parts to see which one is causing the issue. We hope this helps! If you have any questions, please let us know.

Was this helpful?
Thank you for voting!
Related Parts:
Rick
March 15, 2022
Heating element sparking
For model number KEMS308SSSOO
PartSelect logo
Hi Rick, Thank you for your question. If the broil element is sparking it will need to be replaced. The part number listed under your model number for the broil element is PS11747304. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Dale
December 6, 2022
Control panel works but broil element will not heat up. Has been replaced with new element - with no success. Bake element and internal temperature control both work. What else should I look at?
For model number YKESS908SS00
PartSelect logo
Hello Dale, thank you for the question. According to our research, the problem seems to be with the High-Limit Thermostat and you may need to replace it, the part number is PS11747248. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Rand
October 5, 2023
KitchenAid wall electric oven. Doesn't heat up, tested wire (4) to element they are all getting power. Did a continuity test and it beeped, and no visual damage to the outside of the coils. Guessing still could be a problem with element?
For model number KEB5107SSOO
PartSelect logo
Hi Rand, thank you for the question. Based on our understanding of the issue, we would recommend checking the temperature sensor, part number PS11748765, as it is most likely faulty and may need to be replaced. Please submit a new question if you have any follow-ups!

Was this helpful?
Thank you for voting!
Related Parts:
Wickham
February 17, 2020
How do i replace the broiler element?
For model number YKERS807SS00
PartSelect logo
Hello Wickham, Thank you for your question. First, you will need to Disconnect the two connectors on each side of element. Second, remove the screws that were too rusted by using a screwdriver with vise grips. Third, remove the old element, then insert the new element through the holes in rear of the oven. We hope this helps.

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747304
Manufacturer Part Number: WP9760774
Brand
Model Number
Description
Crosley
CT15G4Q
Refrigerator
KitchenAid
KDRS807SSS00
Range
KitchenAid
KDRS807SSS01
Range
KitchenAid
KDRS807SSS02
Range
KitchenAid
KDRS807SSS03
Range
KitchenAid
KDRS807SSS04
Range
KitchenAid
KDRS807SSS05
Range
KitchenAid
KDRS807XSP00
Range
KitchenAid
KDRS807XSP01
Range
KitchenAid
KDSS907SSS00
Range
KitchenAid
KDSS907SSS01
Range
KitchenAid
KDSS907SSS02
Range
KitchenAid
KDSS907SSS03
Range
KitchenAid
KDSS907SSS04
Range
KitchenAid
KDSS907SSS05
Range
KitchenAid
KDSS907XSP00
Range
KitchenAid
KDSS907XSP01
Range
KitchenAid
KEBC167MSS00
Wall Oven
KitchenAid
KEBC167MSS01
Wall Oven
KitchenAid
KEBC167MSS02
Wall Oven
KitchenAid
KEBC167MSS03
Wall Oven
KitchenAid
KEBC167MSS04
Wall Oven
KitchenAid
KEBC167VSS00
Wall Oven
KitchenAid
KEBC167VSS01
Wall Oven
KitchenAid
KEBC167VSS02
Wall Oven
KitchenAid
KEBK101SBL00
Wall Oven
KitchenAid
KEBK101SBL02
Wall Oven
KitchenAid
KEBK101SBL04
Wall Oven
KitchenAid
KEBK101SSS00
Wall Oven
KitchenAid
KEBK101SSS02
Wall Oven
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service