Part Location Diagram of WP9760576 Whirlpool Door Hinge - Left Side
See part 24 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Door Hinge - Left Side WP9760576

Rated by 2 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 61.92
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11747292
Manufacturer Part Number WP9760576
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Wall Oven, Microwave Oven Combo, Range.
This part works with the following products:
KitchenAid, Whirlpool, Maytag.
Part# WP9760576 replaces these:
8300576, 9760576
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 2 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Oven door would not close tightly to turn off the oven light
I follow the directions on the Maytag site. It is a very simple job. I appreciate the Information I got from Becky when ordering the hinges.
Other Parts Used:
Door Hinge - Left Side Door Hinge - Right Side
  • Dan from OLYMPIA, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inside oven door glass was broken and door was not closing completely.
I removed the door from the oven by locking the hinges with the built-in locks leaving the door open about 20 degrees. the door can then be lifted slightly off the hinges and pulled out at the bottom while tilting the top inward to remove it from the oven. With the door laying on a suitable surface with the outside face down, I removed about 6 or 8 screws from the door inside panel freeing the springs and the inside panel from the middle and front panels. Care must be taken to note from which locations the pointed self-taping screws come as opposed to the narrower-thread machine screws that hold the springs. Note: The inside panel does not need to be removed! Once the inside panel is freed from the inner panels, using suction cups the glass can be lifted slightly and slid toward the bottom of the door, rotated slightly, and removed through the window hole in the back face of the door. The new glass is installed in a similar way using suction cups by maneuvering it at a angle through window hole and into its frame. The hinges were replaced by lifting the bottom of the inner door panel slightly to clear the hinge and swapping in the new ones. Be sure to observe the difference between the left and right hinges in the location of the screw hole at the bottom of each hinge The narrow-thread machine screws that hold the hinges to the inside panel should be installed first while you can get you hand inside the door to hold each hinge in alignment with the screw holes while you start each screw. Re-install the pointed self tapping screws by pressing down on the rear panel to collapse the spring-action glass frames within the door so that the short screws will reach their threaded hole. Be careful to back off the self tapping screws first until you feel a click into the original threads to avoid stripping the holes. Last re-install the door on the oven. The replacement hinges should have come with the springs already "cocked" with the built in locks in place. Install the door with it in tan almost-closed position by sliding the hinge extensions into the slots in the oven. Once the extensions are properly in the slots the door can be fully opened and the built-in hinge locks re-positioned to the unlocked position to allow the door to fully close. Should you accidentally release only one of the hinge locks in trying to insert the hinge extensions into the slots you will have to reset the hinge. If the door is free from the oven, this may require a pair of heavy pliers, like channel lock pliers, to re-tension the hinge spring and "cock" the hinge extension by re-positioning the built-in lock in the locked position. If the hinge lock on one side of the door releases, but the the opposite side hinge extension is not fully inserted into the oven slot I recommend carefully moving the door to the fully open position, being careful to avoid twisting the inserted spring's extension, so that the hinge lock can be re-positioned to the locked position, the door full removed, and start again to install it. It helps to have two persons to hold opposite sides of the door for this operation as the door is heavy, but not essential. When in the proper position the hinge extensions may not appear fully inserted, but this is normal to allow for closing of the built in locks. It helps to observe how much of the hinge extension is exposed either before removing the door initially, or, if you have a double oven, looking at the hinges on the door of the other oven. Good luck with your repair.
Other Parts Used:
Door Hinge - Left Side Door Hinge - Right Side Inner Door Glass
  • William from Dumfries, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roy
November 25, 2019
Microwave door slams open. The device I'm looking for is what slows it down when opening the door.
For model number KEMC308KSS01
PartSelect logo
Hello Roy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11742562 for the Right Side and PartSelect Number PS11742585 for the Left Side. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747292
Manufacturer Part Number: WP9760576
Brand
Model Number
Description
Whirlpool
GBD277PRB00
Wall Oven - Built-in, Electric
Whirlpool
GBD277PRB01
Wall Oven - Built-in, Electric
Whirlpool
GBD277PRB03
Wall Oven - Built-in, Electric
Whirlpool
GBD277PRQ00
Wall Oven - Built-in, Electric
Whirlpool
GBD277PRQ01
Wall Oven - Built-in, Electric
Whirlpool
GBD277PRQ03
Wall Oven - Built-in, Electric
Whirlpool
GBD277PRS00
Wall Oven - Built-in, Electric
Whirlpool
GBD277PRS01
Wall Oven - Built-in, Electric
Whirlpool
GBD277PRS02
Wall Oven - Built-in, Electric
Whirlpool
GBD277PRS03
Wall Oven - Built-in, Electric
Whirlpool
GBD277PRT00
Wall Oven - Built-in, Electric
Whirlpool
GBD279PVB00
Wall Oven - Built-in, Electric
Whirlpool
GBD279PVB02
Wall Oven - Built-in, Electric, Double
Whirlpool
GBD279PVQ00
Wall Oven - Built-in, Electric
Whirlpool
GBD279PVQ02
Wall Oven - Built-in, Electric, Double
Whirlpool
GBD279PVS00
Wall Oven - Built-in, Electric
Whirlpool
GBD279PVS02
Wall Oven - Built-in, Electric, Double
Whirlpool
GBD309PVB00
Wall Oven - Built-in, Electric
Whirlpool
GBD309PVB02
Wall Oven - Built-in 30" Double Electric
Whirlpool
GBD309PVB03
Wall Oven - Built-in 30" Double Electric
Whirlpool
GBD309PVQ00
Wall Oven - Built-in, Electric
Whirlpool
GBD309PVQ02
Wall Oven - Built-in 30" Double Electric
Whirlpool
GBD309PVQ03
Wall Oven - Built-in 30" Double Electric
Whirlpool
GBD309PVS00
Wall Oven - Built-in, Electric
Whirlpool
GBD309PVS02
Wall Oven - Built-in 30" Double Electric
Whirlpool
GBS277PRB00
Wall Oven - Built-in, Electric, Wall
Whirlpool
GBS277PRB01
Wall Oven - Built-in, Electric
Whirlpool
GBS277PRB03
Wall Oven - Built-in, Electric
Whirlpool
GBS277PRQ00
Wall Oven - Built-in, Electric, Wall
Whirlpool
GBS277PRQ01
Wall Oven - Built-in, Electric
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service