Make sure you haven't got the discount earlier.
![Customer Service Representative](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/images/csr-partdetail.jpg)
O-Ring Seal WP910934
Fits your MDB7160AWQ!
Rated by 7 customers
Easy
30 - 60 mins
Ratings submitted by customers like you who bought this part.
Fits your MDB7160AWQ!
PartSelect Number PS11746845
Manufacturer Part Number WP910934
Manufactured by
Whirlpool
Product Description
O-Ring Seal Specifications
This o-ring seal is well under an inch in diameter. It is all black in color and it is made entirely of rubber.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Noisy | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag, Jenn-Air, Amana, Crosley.
Part# WP910934 replaces these:
20200032, 7-57298, 757298, 9-0629, 9-10545, 9-10934, 900629, 910545, 910934, Y757298
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 7 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No water from rotating lower spray arm or center spindle; soap dispenser lid would not open.
Had service man: stated I would need new motor/pump at $400 complete. I didn't like the interior of new dishwashers. Nothing to lose, so I verified that the motor was working; reviewed short PartSelect video. Ref: very helpful PartSelect assembly diagrams with parts list. THANKS PS! Removed two dish racks (top rack: extend fully and fl
... Read more
ip the roller-keeper clips. Pull rollers and rack-pins apart) Then I started taking the pump apart all the way down to the pump base (fits into tub with seal - did not replace that seal). Very intuitive - some parts are tight and must be encouraged to come apart; take care of seals and o-rings; take notes of sequence if necessary. Look for parts requiring replacement. Unscrew Spray Tower Lower Extension Nozzle and lift off Spray Arm and two lower spray arm seals - check seals for wear. Unscrew pencil-like Spray Arm Support Nut. Cause: I found a totally-clogged Pump Housing Filter, a bit of steel wool about the size of my thumb (same size as water supply opening in bottom), and small piece of broken glass. Cleaned all parts coated with lime; new Pump Housing Filter (could not clean adequately). Cleaned the screens underside of filter support (difficult) with brush and wire. Replaced o-rings for Wash Impeller and Drain Impeller as a matter of principle. Only alignment requirement is with bottom water supplly hole. Everything works like new now! Recommendation: clean Pump Housing Filter annually.
Read less
Other Parts Used:
-
ROBERT from MORTON, IL
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grinding noise from Dishwasher
Excellent site. When the dishwasher started making a loud grinding sound, i thought "oh great -- now I'll have to buy a new one". After searching the internet (I just entered the model number of my Maytag dishwasher), Partsselect.com came up in the search results. I read several postings from previous customers which described the same pr
... Read more
oblem I was having... followed their step-by-step instructions and was able to disassemble the lower washer arm and find the culprit -- a broken wash impeller. Ordered the parts, they arrived within a couple of days, spent 15 mins putting everything back together and I'm now good to go! THANKS PARTS SELECT!!!!! I owe somebody a free lunch!
Read less
Other Parts Used:
-
Kenneth from Tallahassee, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
started to make loud noise
this repair is done from the inside,remove lower basket,screw off the center nut (its not to tight came off by hand, no tools)take off spray arm,take all the torque bolts out,remove the screen filter take the 3 bolts out of the pump housing and remove, mine came apart that was the noise. The impeller may not need to be replaced but mine
... Read more
had marks on it so I did.Install new seals clean up parts and put it back together with new parts ..works as good as new!!! I had my new parts in 1 (ONE)day PartSelect thank you. Andy,
Read less
Other Parts Used:
-
Andy from Port Deposit, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud whining noise immediately after draining
Removed all parts down to wash impeller following online videos and parts breakdowns (took a while to figure out how to do this). The only difficult part was separating the Discharge Pump housing from the Suction Plate. They are fitted together with friction, and a flat-blade screwdriver can push them apart. Replaced broken parts inclu
... Read more
ding Wash Impeller, Suction Plate, and Discharge Pump Housing. Purchased Filter Support because it was involved and appeared to have been damaged, but the new part looks identical to the old part. Purchased new o-ring & gasket to avoid digging them out of broken parts. Cleaned out the spray arms top & bottom and it now works like new!
Read less
Other Parts Used:
-
Todd from Albuquerque, NM
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishes weren't getting clean
Using the break down view suppled by the PartSelect website I removed the parts covering the broken pump impala. The busted impala also scored the pump housing, which also needed to be replaced. For added measure, I replaced the O rings I encountered (alway a good thing to do while your in there). The shaft of the motor is rusted and I ne
... Read more
eded to break off the last of the impala with small chisel and some light taps. Before reassembling I used some fine grit sandpaper on the shaft, don't go wild here, a tight fit is better than a sloppy one. Total time on the repair wasn't that long. (But don't tell the wife, it bought me a cupple quarters of football!)
Read less
Other Parts Used:
-
Robert from Port Jefferson Station, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leak Developed Above Pump
First, I used the diagrams to disassemble the internal components to inspect the various seals. Then, I reassembled the components and replaced the seals in the process with new ones.
Other Parts Used:
-
Benjamin from Fallston, MD
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit had shaft seal leak.
After shutting off power and water to the unit, I disconnected the water supply line using a Crescent wrench and a pair of channellock pliers to support the solenoid.
I then disconnected the power at the junction box and the drain and circulate lines and clamps.
Then unlatched the retaining ring under the unit and lifted the pu ... Read more mp assembly out.
Using the detail drawing from the web site I disassembled the pump assembly and laid out the parts in order of removal.
I then reassembled the pump assembly in reverse order replacing the worn parts with the new parts purchased from PartSelect.
I then reassembled the unit in reverse order checking for leaks as I went along.
The part worked great and my friend's dishwasher works beautifully.
I then disconnected the power at the junction box and the drain and circulate lines and clamps.
Then unlatched the retaining ring under the unit and lifted the pu ... Read more mp assembly out.
Using the detail drawing from the web site I disassembled the pump assembly and laid out the parts in order of removal.
I then reassembled the pump assembly in reverse order replacing the worn parts with the new parts purchased from PartSelect.
I then reassembled the unit in reverse order checking for leaks as I went along.
The part worked great and my friend's dishwasher works beautifully.
Read less
Other Parts Used:
-
Jay from Victoria, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
6 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
![Pump Housing Filter – Part Number: WP99001791](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11747618-1-N-Whirlpool-WP99001791-Pump-Housing-Filter.jpg)
![Impeller Assembly – Part Number: WP99002069](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11747641-1-N-Whirlpool-WP99002069-Impeller-Assembly.jpg)
![Wash Impeller – Part Number: WP902461](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11746826-1-N-Whirlpool-WP902461-Wash-Impeller.jpg)
![Impeller Screw – Part Number: WP910654](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11746844-1-N-Whirlpool-WP910654-Impeller-Screw.jpg)
![O-RING – Part Number: WP912510](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11746849-1-N-Whirlpool-WP912510-O-RING.jpg)
![Produce Preserver Filter – Part Number: W10346771A](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/3503014-1-N-Whirlpool-W10346771A-Produce-Preserver-Filter.jpg)
![Affresh Washing Machine Cleaner - 3 pack – Part Number: W10135699](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/1960673-1-N-Whirlpool-W10135699-Affresh-Washing-Machine-Cleaner-3-pack.jpg)
![Affresh Dishwasher Cleaner Tablets - 6 – Part Number: W10549851](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/12345667-1-N-Whirlpool-W10549851-Affresh-Dishwasher-Cleaner-Tablets-6.jpg)
![Affresh Cleaner – Part Number: W10282479](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/2367638-1-N-Whirlpool-W10282479-Affresh-Cleaner.jpg)
![Cooktop Cleaner – Part Number: W10355051](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/3492527-1-N-Whirlpool-W10355051-Cooktop-Cleaner.jpg)
![Affresh Ice Machine Cleaner – Part Number: W11179302](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/12583750-1-N-Whirlpool-W11179302-Affresh-Ice-Machine-Cleaner.jpg)
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746845
Manufacturer Part Number: WP910934
Manufacturer Part Number: WP910934
Brand
Model Number
Description
Amana
ADW662EAB-PADW662EAB0
Dishwasher
- Amana Dishwasher Model ADW662EAB-PADW662EAB0 (ADW662EABPADW662EAB0, ADW662EAB PADW662EAB0) Parts
Amana
ADW662EAC-PADW662EAC0
Dishwasher
- Amana Dishwasher Model ADW662EAC-PADW662EAC0 (ADW662EACPADW662EAC0, ADW662EAC PADW662EAC0) Parts
Amana
ADW662EAW-PADW662EAW0
Dishwasher
- Amana Dishwasher Model ADW662EAW-PADW662EAW0 (ADW662EAWPADW662EAW0, ADW662EAW PADW662EAW0) Parts
Back to Top
![Customer Service Representative](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/images/csr-partdetail.jpg)
O-Ring Seal
$
5.36
Special Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.