Jimmy from Stratford, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Parts Used:
The coils would freeze up and it wouldn't cool.
I removed the screws on the covers and remove them, then taken the screws from the timer, the temperature control just set in there, then pulled out a lttle ways and disconnected the wires and then removed. Installed the new ones. I taken the back panel off and removed the clip and pulled the defrost heater out a ways and removed the wires and removed the defrost heater. Installed the new defrost heater and clip and the covers.
83 of 635 people found this instruction helpful.