Quick Question!

Have you ever purchased from PartSelect.com before?

11746245-1-S-Whirlpool-WP8539324-Upper Spray Arm Mount
11746245-1-S-Whirlpool-WP8539324-Upper Spray Arm Mount 11746245-2-S-Whirlpool-WP8539324-Upper Spray Arm Mount 11746245-3-S-Whirlpool-WP8539324-Upper Spray Arm Mount https://www.partselect.com/Schematics/Whirlpool/I3UBBVVU.gif

Upper Spray Arm Mount

Your Price

$6.44
Order within the next 8 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11746245
Manufacturer Part Number WP8539324
Manufactured by Whirlpool

**Please note: This is a redesigned part. The top mounting clip and screw are no longer needed.

This part works with the following brands: Kenmore, KitchenAid, Whirlpool, Inglis.

This part works with the following products: Dishwasher.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Leaking.
  • Noisy.
  • Door won’t close.
  • Will not fill with water.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 98 reviews What's this?
 

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: GEORGE from WEBSTER, TX

Plastic post that suspends the washer arm for the upper basket broke off

Remove the upper wash arm by unscrewing the bracket secured to the upper basket about the middle with a single stainless screw. Remove the entire arm assembly from the dishwasher. Note:: the support at the bck of the basket that holds one end of the plastic water tube is split to allow the water tube to be removed from the bracket. It is not necessary to remove the bracket. . Just the water tube and wash arm assembly. The replacement part $4. 00 Is a new design and snaps into place on the basket and no screw is necessary to hold it in place. Remove the screw from the broken part, being careful to remember the sequence in which the parts install so that they realign properly when re assembled. Insert the new part through the center of the wash arm/water tube assembly and secure with the screw and washer. It helps to run the screw once and back it out again to seat the screw hole before reinstalling the arm and tube on the basket. Snap the assembled part to the center of the basket. ( The arm should be free from the front,split ring,bracket so it can be manipulated to allow the new part to snap in easily. It will not snap in if the front bracket and water tube is still installed in the bracket. ) Re place the warter tube in the plastic support with the split and push the upper basket closed while watching the water tube make contact with the water supply line at the rear of the washer. This is not a water tight connection and has no gaskets. It just simply closes to the connections when the upper basket is pushed into the dishwasher.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Sriharan from Huntersville, NC

Rubber tube and plastic cone connecting spray arm to water supply was worn out

I replaced the existing spray arm with the new one with an integrated plastic connecting tube. I also replaced the spray arm mount although it was still in good condition. The dishes are cleaner now but there is still a lot of detergent residue although I suspect this might be caused by the detergent. The new mount has a hole on the top and I'm wondering if water is escaping through it instead of being redirected to then entire arm. Good service and delivery by Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: joel from farmington, MN

Broken mount for washer arm

one screw and done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jennette from El Paso, TX

Broken upper spray arm mount

The mount was already broken into 5 pieces so all I really did was remove the screw from the broken piece. I then placed the mount onto the diswasher rack, placed the arm on the mount & screwed it in. Real simple & easy. In these tough economic times & also for your own satisfaction; it's often just better to do things yourself!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Arthur from Palm Harbor, FL

Large pan cracked the water spinner assembly under the top rack

Unscrewed the old stem from the water spinner. Unscrewed and removed the old mount from the upper rack. Snapped in the new mount...no screw necessary with the new piece. Screwed the stem to the water spinner...as good as new. EASY!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Richard from Odessa, TX

Broken part

simply applied the parts by looking at the old parts on the machine. Very simple

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: orlando from acworth, GA

The bracket that holds the spray arm had split in two.

Un screwed the bracket part fron the arm, screwed the new part to the arm and snapped in onto the wire tray. snappo...done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Don from Walnut Creek, CA

Cracked mount

Replaced mount and spray arm by unscrewing the
broken mount, inserting the replacement mount,
attaching the spray arm and aligning it with the
water supply.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Kurt from Dickinson, TX

The mount had broken that holds up the spray arm.

Once the new parts came in I simply changed out part for part. It was very simple to do the parts where just like the originals that where in the dishwasher.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: lisa from roeland park, KS

The mount that held the washer arm for the top rack broke.

It took longer to open the package than it did to install the new piece. All I had to do was unscrew one screw, snap the new piece on and screw in one screw.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Michael from Glenolden, PA

Plastic mount was broken

Removed one screw and replaced with new part and screw.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Colleen from CORPUS CHRISTI, TX

Mount sheared off for upper spinning nozzle.

I had already taken the broken mount, which holds the top spinning in place off. Just had to undo the screw, reassemble, and clip in place. Fortunately I had seen a similar story that identified that the type of clip had been modified, and the new installation required one less screw, as it clipped in place instead. The hardest part was getting the old part out, because there wasn't anything to brace it easily. Communication from Part Select was great, and delivery was quick!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Michelle from Columbia Station, OH

Upper rack bracket broke

The repair was so simple, I removed the broken bracket with a phillips screwdriver. Took off the piece that connects to the back of the dishwasher when closed and replaced the plastic bracket. Screwed in the new bracket. 5 Min. tops! Ordering the parts took longer. Thanks for such a great online catalog!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Christopher from Williamsburg, VA

Broken sprayer mount

I removed the old mount with a screwdriver, clipped on the new mount - no screws required - and screwd the sprayer back onto the mount. 2 mins. start to finish.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Spray Arm Mount
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Karen E. from BRENTWOOD, CA

Stem broke off that holds the washer blade.

I found the model number and went to your site when it came up. I put in the model # and the photos described each part. That was very helpful. I only ordered what I needed and it arrived in one week...we did have a holiday. The part snapped on to the upper rack and I screwed the blade back in place. I'm glad I purchased another part for future breakage. If dishes or etc. catch the fan blade on top...then breakage can occur. The part was less then $5.00. What a deal!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11746245
Manufacturer Part Number: WP8539324
Brand Model Number Description
Kenmore110773811Dishwasher
Kenmore110773812Dishwasher
Kenmore110773813Dishwasher
Kenmore110773881Dishwasher
Kenmore110773882Dishwasher
Kenmore110773883Dishwasher
Kenmore66515622000Dishwasher
Kenmore66515624000Dishwasher
Kenmore66515627000Dishwasher
Kenmore66515629000Dishwasher
Kenmore66515632000Dishwasher
Kenmore66515634000Dishwasher
Kenmore66515637000Dishwasher
Kenmore66515639000Dishwasher
Kenmore66515652000Dishwasher
Kenmore66515654000Dishwasher
Kenmore66515659000Dishwasher
Kenmore66515682000Dishwasher
Kenmore66515684000Dishwasher
Kenmore66515689000Dishwasher
Kenmore66515701890Dishwasher
Kenmore66515701891Dishwasher
Kenmore66515701892Dishwasher
Kenmore66515702990Dishwasher
Kenmore66515705890Dishwasher
Kenmore66515705891Dishwasher
Kenmore66515705892Dishwasher
Kenmore66515707990Dishwasher
Kenmore66515708890Dishwasher
Kenmore66515708891Dishwasher