Part Location Diagram of WP8268785 Whirlpool Stationary Wheel and Mount
See part 4 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Stationary Wheel and Mount

★★★★★
★★★★★
16 Reviews

Rated by 10 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 29.58
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11745464
Manufacturer Part Number WP8268785
Manufactured by Whirlpool
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Product Description

Stationary Wheel and Mount Specifications

Sold individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid.
Part# WP8268785 replaces these:
AP6012257, 8268785
Back to Top
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William Murphy
February 6, 2019
I have a KitchenAid dishwasher. The upper dishwasher rack wheels pull out from the bracket that holds the top rack. I assume that i need to replace the four upper dishwasher wheel part no. 8268785. The replacement looks straightforward. However, i am not sure how to get the end cap off and then back on. Can you help me with this? Thanks.
For model number KUDP01DLWH6
PartSelect logo
Hello William, Thank you for your inquiry. Upon reviewing the part I show that in order to remove the track end cap, you would use a flat blade screwdriver to press the tabs on the inside of the track, then remove the stop. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
March 6, 2020
Part # ps11745464 our rack keeps pulling out of the f-shaped track in the part which holds onto the rack. In your 2nd picture, that's the left end of the part. We can push the rack back into them but after a wash or 2 they pop out again especially when there weight, that is, a load of dishes in it. Doesn't look like anything is broken? Your thoughts? Thx
For model number KUDPO1DLBS6
PartSelect logo
Hello and thank you for writing. It sounds like the plastic parts might have become faulty due to the heat of the dishwasher, they might not show any damage that would be obvious, but they still might have bend and that could be causing these symptoms. You should consider changing those parts, but do inspect them for damage such as being slightly bent. We hope this information helps. Please contact us anytime if you require further assistance.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ron
July 14, 2021
Does bracket support arm go on vertical or horizontal? Where should bracket be placed on tray?
PartSelect logo
Hello Ron, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!

Was this helpful?
Thank you for voting!
Rich
October 18, 2021
The wheel of the wheel assembly you sent is too small. The one I need is 1 and quarter inches in diameter.
For model number KUDK01IL
PartSelect logo
Hello Rich, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11745459. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Jim
February 4, 2023
How do I remove the plastic roller from rack?
For model number KUDM01TJBS1
PartSelect logo
Hello Jim, Thank you for the question. Once the Rack is removed from the Appliance the Wheel and mount just clip or snap onto the Dish Rack. To remove you just need to snap the Mount off the Rack. We hope this helps!

Was this helpful?
Thank you for voting!
  • 1
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 10 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Wheel on top rack broke
In less than 5 minutes, we removed the stopper on the end of the arm that held the top rack, slid off the top rack, rotated off the broken wheel assembly, rotated on the new one, slid the rack back on, and replaced the stoppers.
  • Polly from Powell, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
34 of 40 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel mount broke on right side of top shelf. Shelf not supported.
I order a pair of wheel mounts and replaced both. Squeezed ends of plastic "plug" on the front edge of each rail (top shelf) and removed plug. slid out top shelf, snapped off old whell mounts, snapped on new wheel mounts, slide shelf back into track and re-inderted end "plugs". Done!
  • Warren from Wantagh, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
13 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic bracket broke holding rack up
part was easy snapped into rack holding the rack in tact.
  • carol from Sebastian, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the bracket the holds the basket broke and would not move in or out, I orderd the part in the morning and received the part the next morning FED X
I removed the old broken bracket and click on the new bracket it took me about 2 minutes to do. I was very pleased with the service. I am a single woman and was able to repair the part my self (Horray)
  • Christine from Thousand Oaks, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel mount was broken
Husband removed a small piece at the end of the upper tray frame and slid new wheel mount on. Clicked it into place and replaced end piece.
Very pleased to save expense of a house call and delay that would have been required while part was ordered.
  • Margaret from Las Cassas, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the wheels just fell apart from all the heat and chemicals
pulled the ends off the top rails--pulled the top tray out--set it up on its back end--replaced the wheel mounts by threading them through the sides of the tray--returned the tray to the machine and replaced the ends
  • Cynthia from Lynchburg, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheels on top rack were broken
Removed rubber stoppers from arms on top rack of dishwasher.
Pulled out and removed top rack from dishwasher
Took off old wheels and replaced with new wheels
on rack.
Ran wheels into arms of dishwasher and replaced rubber stoppers. Done.
  • James from Brooklyn, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken wheel mount
I just popped of the end cap, removed the old part and installed the new. Very easy!
  • Cindy from Hattiesburg, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very difficult to figure out install
First, to do this correctly and easily, you should remove the end clips holding the upper tray and remove the tray. To do this, you must pull the clips from the side and install those clips the same way-slide in from the outside. Otherwise if you try to pull the clips straight out you could break the clip.
To install the new part, I struggled with how to do this for almost an hour. The key is to slip the roller thru the area where it is to be installed and hook one side to the tine on the lower left then carefully move the entire part up, being sure to have the left part of the unit positioned so that it also sits as intended. There should be a UTube for this part, or it should be sent with instructions. Very frustrating..
  • Ira from ROCKVILLE, MD
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    1- 2 hours
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cheap asian import dishwasher
Replace sheet parts with more sheet parts.
  • Paul from Suwanee, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating:
★★★★★
★★★★★
16 Reviews
4.6
Filter By Rating:
  • 5 Stars
    13
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    1
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11745464
Manufacturer Part Number: WP8268785
Brand
Model Number
Description
KitchenAid
KUDM01FKBL0
Dishwasher
KitchenAid
KUDM01FKBL1
Dishwasher
KitchenAid
KUDM01FKBT0
Dishwasher
KitchenAid
KUDM01FKBT1
Dishwasher
KitchenAid
KUDM01FKSS0
Dishwasher
KitchenAid
KUDM01FKSS1
Dishwasher
KitchenAid
KUDM01FKWH0
Dishwasher
KitchenAid
KUDM01FKWH1
Dishwasher
KitchenAid
KUDM01TJBL0
Dishwasher
KitchenAid
KUDM01TJBL1
Dishwasher
KitchenAid
KUDM01TJBS0
Dishwasher
KitchenAid
KUDM01TJBS1
Dishwasher
KitchenAid
KUDM01TJBT0
Dishwasher
KitchenAid
KUDM01TJBT1
Dishwasher
KitchenAid
KUDM01TJWH0
Dishwasher
KitchenAid
KUDM01TJWH1
Dishwasher
KitchenAid
KUDP01DLBL0
Dishwasher
KitchenAid
KUDP01DLBL1
Dishwasher
KitchenAid
KUDP01DLBL2
Dishwasher
KitchenAid
KUDP01DLBL3
Dishwasher
KitchenAid
KUDP01DLBL5
Dishwasher
KitchenAid
KUDP01DLBL6
Dishwasher
KitchenAid
KUDP01DLBL7
Dishwasher
KitchenAid
KUDP01DLBS0
Dishwasher
KitchenAid
KUDP01DLBS1
Dishwasher
KitchenAid
KUDP01DLBS2
Dishwasher
KitchenAid
KUDP01DLBS3
Dishwasher
KitchenAid
KUDP01DLBS5
Dishwasher
KitchenAid
KUDP01DLBS6
Dishwasher
KitchenAid
KUDP01DLBS7
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service