Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
KYLE S - April 25, 2019
Verified Purchase
Excellent Customer Service
Called three times. Placed three orders with three different reps. Great people. Shipped fast. Exactly what I ordered.
★★★★★
★★★★★
Henry L - December 3, 2018
Verified Purchase
Hose
Fits perfectly
★★★★★
★★★★★
Gerardo G - October 29, 2018
Verified Purchase
Easy Repair.
Parts received was shorter on the pump suction end by about 3/8" compared to the original part, but, it still worked
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
A rat ate holes in several rubber elbows in our washer
I got the three rubber elbows to quickly (at an additional price). They were the correct part and fit exactly. I replaced the aggravating spring clamps with new radiator-type screw clamps which made the job easier and in my opinion better. Then I devised a little hardware cloth "fence" around the bottom to the washer to keep the rat ou
... Read moret. The job is tough enough in that you must tip the washer forward to get at the lower elbows. Also probably a good idea to adjust the feet "in" as far as possible to minimize rodent access from the bottom.
my daughters ferret chewed little pinholes in the pump hoses
two small compression clamps hold the hoses in place. these are very simple to remove, however to reinstall the new hoses you should unscrew the pumps with a nut driver, secure the hoses with the clamps, and then screw the pump back to the bottom of the drum. oh yeah make sure to put the back plate back on the machine
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kriste
April 19, 2018
My washing machine is leaking out of the bottom of the cabinet. How do I access this to determine what the problem is and fix it?
For model number WTW8200YW0
Hi Kriste, Thank you for the question. You will need to pull the appliance out from the wall and tip it back or remove the front and side cabinet panels. There are screws at the back of the appliance that hold the panels in place. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rene
December 13, 2018
Washer is going on 4 years old should the drain pump even be something going out on fairly new washer. I just want to make sure i purchased the correct part
For model number Wtw8500bwo
Hello Rene, thank you for your question. Yes, the drain pump is one of the most common parts to go bad on any washer of any age. This part gets a lot of wear and tear. I hope this helps!
Was this helpful?
Thank you for voting!
Sandra
March 18, 2023
Hi we have water leaking from the bottom. How do you know whether its the hose or the actual pump that needs replacing?
For model number Whirlpool Washing Machine Model WTW8200YW0
Hello Sandra, Thank you for your inquiry. You can visually examine both parts for any visible damage or restrictions, and you can test the drain pump with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps you.
Was this helpful?
Thank you for voting!
Kim
January 13, 2024
Whirlpool cabrio platinum leaking from under neath at front left corner.Just ordered a new drain pump and going to replace that.Also gives UL code when trying to spin.Going to replace suspension rods.Any other suggestions that would give a UL code?
For model number WTW8500BC0
Hi Kim, thank you for contacting us. The UL error code indicates that the load is out of balance. We would recommend checking that the load is properly balanced. The issue is most probably with the suspension rods, part number PS3502193. You may need to replace it to fix the issue. We hope this sorts out your problem!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Washer","title":"Washer","url":"/Washer-Parts.htm"},{"position":2,"name":"Hose or Tube","title":"Hose or Tube","url":"/Washer-Hoses-and-Tubes.htm"},{"position":3,"name":"WP8182767","title":"WP8182767","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
