Replacing your Whirlpool Washer Control Microcomputer
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool.
Part# WP8182695 replaces these:
AP6011828, 8182274, 8182274R, 8182695, 8182695R
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
door lock of the microcomputer malfunctioned and began shorting out.
First I unplugged the machine, then I took off the top (front loader) then I pried up the plastic clips that held the microcomputer in place onto the frame. I moved all the wiring off of wire clips and began unplugging each wire and plugging it into the new board, Matching place for place. after all wiring was transferred I put the wiring
... Read more bck into the wire clips. Then I pushed the clips of the the new mc onto the frame where the other was. It slipped right into place. Then I put the top back on plugged the machine in and started washing. I am a 51 year old woman who is not mechanically inclined.
Read less
Joyce from Raymond, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
31 of 43 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kelvin
January 19, 2018
The symptom is that all button at the front has no response, i can not even turn the power off. Do you think it is caused by the electronic module?
For model number GHW9150PW-4
Hello Kelvin, Thank you for your inquiry. I would check both the control microcomputer and the electronic control board. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Everald
April 15, 2022
HI my machine keep displaying this code F14 what does it mean ?
For model number GHW9150PW0
The Whirlpool Duet Washer F14 Error is a EEPROM Error. The central control unit (CCU) gets its data from an EEPROM chip inside the central control unit. The issue is with PS11745027. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
