Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ray
January 23, 2019
Is this the part with the 3 buttons controlling the cube,crushed and water buttons? The cover part showing the description for each button is also worn out exposing the buttons. Would this part be available also?
For model number MZD2766GE
Hello Ray, thank you for your question. This switch board is just the board not the overlay that has the writing for the different options. The overlay with the touch buttons is part number 61005386. Unfortunately, this part has been discontinued by the manufacturer and is no longer available.
3 people found this helpful.
Was this helpful?
Thank you for voting!
James
October 7, 2019
The ice maker chute door will suddenly repeatedly open and close over and over until the refig door is opened. It happened 3 or 4 times last night. I disconnected the power to the door. What part do i need?
For model number Maytag Refrigerator MSD2732GRS
Hello James, thank you for inquiring. You will want to consider either the Dispenser Solenoid, part number PS11743473, or the Dispenser Control Board, part number PS11743224 for your model. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
February 17, 2023
The small night light on the ice dispenser constantly stays on. It’s been like this from the second month after purchasing the Maytag side by side Refrigerator. It’s at least 20yrs old now. I called back when we got it and Maytag covered the part, but not the labor which was like $200. I just took the bulb out, will this board fix the issue?
For model number MSD2754GRW REV. NO 18
Hello James, Thank you for your inquiry. This board controls the dispenser control functions and the light. Sometimes the light can be reset by holding down lock and water together for 5 seconds. If that does not work, then the board may be faulty and you should check it for any visible damage. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
