This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Washer Drain Pump
Troubleshooting
This part fixes the following symptoms:
Will not drain
This part works with the following products:
Washer.
This part works with the following products:
Maytag.
Part# WP34001098 replaces these:
34001098
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kendall D - July 8, 2018
Verified Purchase
Home fix
Great price..my washer is running great
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 7 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
washer stoped working
open up the back and listen to the noise then I fixed the problem I me Kevin Isadore the good job. thanks
Doris from Houston, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
0 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A quarter was lodged in the drain pump and demolished the impeller.
After two weeks with out a Washing machine in the RV, we were finally in a place long enough to order the part to fix it. I replaced this part before through Sears and although the price was similar,'it took two weeks to deliver the part. This was here the next day. One screw, two clamps and it was done.
Tosca from Mundelein, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
clinking noise as machine was trying to drain
got on internet found website that would show me how to get to the pump, part select phone number and the part number of drain pump- ordered on thurs night, got part on sat.am, me and my roommate tilted machine removed the 4 screws and 2 pipe clamps, did reverse procedure and machine was fixed- total repair cost was less than a service ca
... Read morell
Read less
mildred from castle hayne, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Coin ruined drain pum impeller blade / SUDS error
Unplug machine, turn on its side (have bucket to drain water from hose), unscrew drain hose bracket on back (so you can fully empty water still inside machine) unscrew bottom plastic cover, locate pump on left, pull out electrical connector, unscrew hose clamps, twist off hoses, unscrew pump and replace, and follow the above steps in reve
... Read morerse. I also made a coin trap from a sawed off plastic drain or downspout cover/protector and installed this inside the hose at the entry point to the pump, enlarging the holes enough to make sure they wouldn't easily clog with lint.
Read less
Dan from Arlington, VA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
30 of 33 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wouldn't spin or drain properly, suds error.
Since this was our 3rd time to remove this part, due to coins getting stuck in the pump, it went pretty easily. Removed the panel underneath, removed and replaced the pump, replaced everything as it was. Washer works great again!
Christine from Dysart, IA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer wouldn't spin / drain
First I looked up the error codes in the washing machine technical information pamphlet I got when buying the machine to determine what the problem was. It indicated that the machine wouldn't spin. After doing a few more tests I couldn't find the error code that was displaying, but the machine wouldn't run at all and just did a terrible
... Read more growling sound. I tilted the machine back to get access to the bottom. Undid the flimsy corregated covering held in by 4 screws. In the right front corner I found the pump. There were 2 tubs connected to the pump; I undid each (a simple squeeze off holder) and found nothing blocking either passage. The type of pump is build as one part, so I was unable to open it up. I decided to order a new pump assuming that was the problem and in fact it was. Replacing the pump was a piece of case. I undid the two tubes, disconnected the electrical connector then removed it from the washer casing with 4 screws. The new pump was easy to install -- screwed it in place with the 4 screws, reconnect the electrical part (just a simple female / male connection), reconnect the 2 tubs, put the bottom covering back on, and that was it. It's working just fine now.
Read less
Sarah from Kirkland, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
52 of 59 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer did not complete the cycle due to bad pump
I turned the washer on its side disconnected the hoses attached to pump. Then unscrewed the pump attatched to the washer base; undid the power source and ordered the part from you. Reattached the new pump to the washer: reconnected the power source and hoses to the new pump. Then flipped the washer upright and it works.
judy from aspen, CO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.